Air density is mass per unit volume, usually expressed in kilograms per cubic metre (kg/m³), not “per foot.” This calculator finds air density in kg/m³ from air temperature and pressure, then converts it to lb/ft³ so you can read the value in customary units.
Formula
The calculator uses the ideal-gas density equation for dry air:
ρ = P / (Rd T)
- ρ is air density in kg/m³.
- P is absolute pressure in pascals (Pa). The input is in kilopascals, so convert it using P = p × 1,000 Pa/kPa.
- Rd is the specific gas constant for dry air, 287.05 J/(kg·K), a conventional approximation.
- T is absolute temperature in kelvins (K), calculated as t + 273.15, where t is the input temperature in °C.
To convert kg/m³ to lb/ft³, multiply by 0.0624279606. This factor follows from 1 kg = 2.2046226218 lb and 1 m³ = 35.3146667215 ft³. The first output is the requested customary-unit result; the second shows the SI value.
Worked Example
Using the default inputs, air temperature is 20 °C and absolute pressure is 101.325 kPa.
- Convert temperature to kelvins: T = 20 + 273.15 = 293.15 K.
- Convert pressure to pascals: P = 101.325 × 1,000 = 101,325 Pa.
- Calculate density: ρ = 101,325 / (287.05 × 293.15) ≈ 1.2041 kg/m³.
- Convert to pounds per cubic foot: 1.2041 × 0.0624279606 ≈ 0.0752 lb/ft³.
The calculator displays 0.0752 lb/ft³ and 1.2041 kg/m³, rounded to four decimal places.
Assumptions
- Air is treated as a dry, ideal gas with a fixed specific gas constant of 287.05 J/(kg·K).
- Pressure is absolute pressure, not gauge pressure.
- Temperature is converted from °C to K using +273.15.
- Humidity and changes in air composition are not included.
What “Air Density ft” Means
The wording “air density ft” is usually a shorthand search for air density in cubic feet, most often pounds per cubic foot (lb/ft³). Density always needs both a mass unit and a volume unit: “per cubic foot” alone describes a volume, not a density. In SI units, density is commonly written kg/m³; in US customary units, lb/ft³ is common.
At the calculator’s default conditions—20 °C and standard atmospheric pressure—the density is about 0.0752 lb/ft³. That is not a universal value for air. Air density changes with pressure, temperature, humidity, and altitude. A reference figure is useful only when its conditions and units are stated.
How Temperature and Pressure Affect Density
The ideal-gas equation explains the direction of the changes. At the same pressure, warmer air has lower density because the same mass occupies more volume. At the same temperature, increasing absolute pressure raises density. For example, air at 0 °C and 101.325 kPa is denser than air at 20 °C and the same pressure; air at a high-elevation location is generally less dense because atmospheric pressure is lower.
Pressure must be absolute because the gas law measures pressure relative to a vacuum. A weather report or barometer commonly provides atmospheric pressure directly, which is absolute. Gauge pressure, by contrast, is measured relative to local atmospheric pressure and is often zero in an open room. Do not enter a gauge reading as though it were absolute; add the local atmospheric pressure when a gauge value is what you have.
The calculator assumes dry air. Water vapor is lighter, molecule for molecule, than the average mixture of dry air, so humid air at the same temperature and pressure is slightly less dense. For ordinary estimates the dry-air result can be adequate, but precision work involving buoyancy, airflow, or meteorology may need humidity and a more detailed moist-air calculation.
Using the Result and Choosing Units
Use the lb/ft³ result when a calculation, reference table, or engineering specification calls for pounds per cubic foot. Use kg/m³ for SI calculations. Keep units consistent throughout any follow-on calculation: combining lb/ft³ with a volume in cubic metres, for example, requires conversion before multiplying to obtain mass.
- For a volume in cubic feet, mass in pounds is density in lb/ft³ multiplied by volume in ft³.
- For a volume in cubic metres, mass in kilograms is density in kg/m³ multiplied by volume in m³.
- For a conversion between the two density units, 1 kg/m³ ≈ 0.06242796 lb/ft³, and 1 lb/ft³ ≈ 16.01846 kg/m³.
As a simple scale example, one cubic foot of air at the default conditions has a mass of about 0.0752 lb, or about 34.1 g. This is a small amount, but air’s mass matters in large volumes and in calculations involving lift, ventilation, or fluid flow.
Common Errors and Limits
- Using a temperature in °C directly: the gas equation requires kelvins. The calculator adds 273.15 automatically.
- Entering gauge pressure: use absolute pressure. A negative gauge reading is not a negative absolute pressure.
- Mixing cubic feet and cubic metres: density conversions change by a factor of about 16.01846, so check both the mass and volume units.
- Treating a reference value as fixed: the familiar value near 1.2 kg/m³ is an approximation near room temperature and sea-level pressure, not a constant for every location or weather condition.
The ideal-gas model is a useful approximation for everyday air-density calculations, but it does not account for humidity or exact atmospheric composition. At unusually high pressures or when high precision is required, use a validated moist-air or real-gas model with the required environmental inputs. The calculator also cannot infer local pressure from altitude; enter a measured or otherwise established absolute pressure for the conditions you want to represent.
Frequently Asked Questions
What is the density of air in lb/ft³?
Near 20 °C and 101.325 kPa, dry air is approximately 0.0752 lb/ft³. State temperature and pressure alongside the number because density varies with both.
Is air density measured in ft or ft³?
Density is measured as mass per volume, such as lb/ft³. A foot (ft) is a length unit; a cubic foot (ft³) is a volume unit.
How many kg/m³ are in 1 lb/ft³?
One pound per cubic foot is approximately 16.01846 kilograms per cubic metre. Conversely, 1 kg/m³ is approximately 0.06242796 lb/ft³.
Does altitude change air density?
Usually, yes. Atmospheric pressure generally decreases as altitude increases, so density tends to decrease when temperature and other conditions are comparable. Use the actual local absolute pressure for a more relevant estimate.
Does humidity make air denser?
No. At the same temperature and pressure, adding water vapor generally makes air slightly less dense than dry air. This calculator omits humidity, so its result represents dry air approximately.
Related
Formula used
in t | Air temperature | °C | 20 | -273.15 in p | Absolute air pressure | kPa | 101.325 | 0 out d | Air density | lb/ft³ | (p * 1000) / (287.05 * (t + 273.15)) * 0.0624279606 | 4 out si | Air density | kg/m³ | (p * 1000) / (287.05 * (t + 273.15)) | 4
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Skip Calculator for Soil: What It Can and Can’t Do7.500 m³
- USD to KPW Calculator: Convert Dollars to North Korean Won90,000.00 KPW
- OK Calculator on TV on the Radio? Meaning Explained
- Pension Calculator KP: Estimate Your Pension Benefits
- Neonatal Kp Calculator: What It Means80.0000 mmol/mmol
- Newton to kp Converter Calculator and Formula1.0000 kp