At standard sea-level conditions, dry air has a density of about 0.0765 lb/ft³, or 1.225 kg/m³. Use this calculator to estimate air density from pressure and temperature; enter pressure in kPa and temperature in °C to get density in kg/m³ and lb/ft³.
Formula
The calculator uses the ideal-gas density equation for dry air:
ρ = p / (Rair T)
- ρ is air density in kg/m³.
- p is absolute pressure in pascals. The input is in kPa, so the expression multiplies it by 1,000 Pa/kPa.
- Rair is the specific gas constant for dry air, taken here as 287.05 J/(kg·K).
- T is absolute temperature in kelvins. Convert °C to K by adding 273.15.
To express density in pounds per cubic foot, multiply kg/m³ by 0.0624279606 lb/ft³ per kg/m³. This conversion follows from 1 kg = 2.20462262 lb and 1 m³ = 35.3146667 ft³. Pressure must be absolute pressure, not gauge pressure.
Worked Example
Using the defaults, pressure is 101.325 kPa and temperature is 15 °C.
- Convert temperature: T = 15 + 273.15 = 288.15 K.
- Convert pressure: p = 101.325 × 1,000 = 101,325 Pa.
- Calculate density: ρ = 101,325 / (287.05 × 288.15) ≈ 1.2250 kg/m³.
- Convert to pounds per cubic foot: 1.2250 × 0.0624279606 ≈ 0.07647 lb/ft³.
The calculator displays the first result as 0.0765 lb/ft³ and the SI result as 1.2250 kg/m³, rounded to four decimal places.
Assumptions
- Air is treated as a dry, ideal gas.
- The specific gas constant is fixed at 287.05 J/(kg·K), a conventional value for dry air.
- Temperature is uniform, and pressure is absolute.
- Humidity, gas composition changes, and non-ideal effects are not included.
What Air Density per Cubic Foot Means
Density is mass divided by volume. A value of 0.0765 lb/ft³ means that one cubic foot of air has a mass of approximately 0.0765 pounds under the stated conditions. It is a mass, not a force: pounds per cubic foot is commonly used in US engineering, while kg/m³ is the SI unit.
The phrase “air density per ft³” does not have one fixed answer because air expands or contracts as temperature and pressure change. The standard-atmosphere example—15 °C and 101.325 kPa—is a convenient reference, not a description of every location or weather condition. Elevation, weather systems, and indoor heating can all alter the result.
How Temperature and Pressure Change Density
At a fixed temperature, increasing absolute pressure increases density in direct proportion. For example, doubling the pressure while holding temperature constant doubles the ideal-gas density. At fixed pressure, raising temperature lowers density because the same mass occupies more volume. In the formula, temperature must be in kelvins; using Celsius directly would produce an incorrect result.
These relationships explain why a cubic foot of cold air generally weighs more than a cubic foot of warm air at the same pressure. They also explain why pressure and temperature readings should be taken at the relevant place and time when estimating airflow, buoyancy, or the mass of air in a room.
Using the Calculator and Choosing Inputs
- Enter the local absolute pressure in kPa. A weather report may give pressure adjusted to sea level rather than the pressure at your elevation; use the actual local station pressure for a local-density estimate.
- Enter air temperature in °C. Use the air temperature in the volume being considered, not a nearby surface temperature.
- Read the first output in lb/ft³ or the second in kg/m³. Keep the chosen units consistent when using density in another calculation.
If a pressure source reports gauge pressure, add local atmospheric pressure to obtain absolute pressure before entering it. Gauge pressure is measured relative to ambient pressure; at an open-air location, gauge pressure is approximately zero even though the air has substantial absolute pressure.
Humidity, Altitude, and Practical Limits
Moist air is usually less dense than dry air at the same temperature and pressure. Water molecules have a lower molar mass than the average molecules in dry air, so replacing some nitrogen and oxygen with water vapor lowers the mixture’s average molecular mass. This calculator does not account for humidity; a humidity-aware calculation needs water-vapor information as well as temperature and pressure.
Altitude matters mainly because atmospheric pressure generally falls as elevation rises. Do not substitute elevation alone for pressure: actual pressure also varies with weather, and temperature changes with altitude in ways that depend on atmospheric conditions. For high-accuracy engineering or aviation work, use an appropriate standard-atmosphere or moist-air method and the applicable local measurements.
The ideal-gas model is a useful approximation for ordinary atmospheric conditions. It is not intended for every gas mixture, extreme pressure, or specialized precision application. The fixed dry-air gas constant also presumes ordinary air composition.
Frequently Asked Questions
What is the density of air in lb/ft³?
At 15 °C and 101.325 kPa, dry air is about 0.0765 lb/ft³. The value changes with pressure, temperature, and humidity.
How many kg/m³ is air at sea level?
A commonly used standard reference is about 1.225 kg/m³ at 15 °C and standard sea-level pressure. Different reference temperatures give different densities.
Is air density the same everywhere?
No. Temperature, local absolute pressure, water vapor, and air composition affect density. A standard value is a reference, not a universal constant.
Should I use gauge or absolute pressure?
Use absolute pressure in the ideal-gas equation. Gauge pressure alone is measured relative to the surrounding atmosphere and is not the total pressure of the air.
Does humidity make air heavier?
At equal temperature and pressure, adding water vapor generally makes air less dense because water vapor has a lower molecular mass than the main components of dry air.
Related
Formula used
in p | Absolute pressure | kPa | 101.325 | 0 in t | Air temperature | °C | 15 | -273.15 out d | Air density | lb/ft³ | (p * 1000) / (287.05 * (t + 273.15)) * 0.0624279606 | 4 out si | Air density | kg/m³ | (p * 1000) / (287.05 * (t + 273.15)) | 4
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Skip Calculator for Soil: What It Can and Can’t Do7.500 m³
- USD to KPW Calculator: Convert Dollars to North Korean Won90,000.00 KPW
- OK Calculator on TV on the Radio? Meaning Explained
- Pension Calculator KP: Estimate Your Pension Benefits
- Neonatal Kp Calculator: What It Means80.0000 mmol/mmol
- Newton to kp Converter Calculator and Formula1.0000 kp