molecalculator

Moles & Molar Mass

As Element Electron Configuration Explained

Guide 01-9445 · Updated · Step by step

This page explains the electron configuration of the element arsenic (As), which is [Ar] 3d10 4s2 4p3. You enter nothing—this is a reference page, not a calculator—and you get the full orbital filling order, the condensed notation, and the reasoning behind it. The configuration shows arsenic has 33 electrons arranged in shells around the nucleus, with five valence electrons in the fourth shell.

What the Configuration Means

Electron configuration is a shorthand that describes where electrons live in an atom. Each electron occupies an orbital, which is a region of space with a specific energy. The notation uses numbers (shells), letters (subshell types: s, p, d, f), and superscripts (how many electrons in that subshell). For arsenic, the full configuration is:

1s2 2s2 2p6 3s2 3p6 3d10 4s2 4p3

Adding the superscripts: 2 + 2 + 6 + 2 + 6 + 10 + 2 + 3 = 33, which matches arsenic’s atomic number. The condensed form, [Ar] 3d10 4s2 4p3, uses the noble gas argon (atomic number 18) to represent the filled inner shells.

How the Orbitals Fill

Electrons fill orbitals according to the Aufbau principle (from German “aufbau,” meaning building up), which states that electrons occupy the lowest-energy orbitals first. The order is not simply 1, 2, 3, 4 by shell number; instead, it follows the diagonal rule (Madelung’s rule):

  • 1s, 2s, 2p, 3s, 3p, 4s, 3d, 4p, 5s, 4d, 5p, 6s, 4f, 5d, 6p, 7s, 5f, 6d, 7p

For arsenic, the 4s subshell (lower energy) fills before the 3d subshell, even though 3d is in a lower principal shell. That is why the configuration shows 4s2 before 3d10 in the full notation, though many textbooks list them in principal shell order (3d10 then 4s2). Both are correct; the Aufbau order emphasizes energy, while the shell order emphasizes the principal quantum number.

Valence Electrons and Chemical Behavior

Arsenic has five valence electrons: two in the 4s subshell and three in the 4p subshell. These are the electrons involved in chemical bonding. Because it has five valence electrons, arsenic is in Group 15 of the periodic table (nitrogen family). It commonly forms compounds with oxidation states of +3 (losing the two 4s and one 4p electron) and +5 (losing all five valence electrons), as seen in arsenic trioxide (As2O3) and arsenic pentoxide (As2O5).

The presence of the filled 3d subshell is significant: it does not participate in bonding for arsenic, but it affects the atomic radius and ionization energy. The 3d electrons shield the outer 4p electrons less effectively than inner s and p electrons, which is why arsenic has a relatively high electronegativity (2.18 on the Pauling scale) compared to metals in the same period.

Exceptions to the Aufbau Rule

Arsenic itself follows the Aufbau rule perfectly, but many elements do not. Chromium (Cr) and copper (Cu) are the classic exceptions: chromium’s expected configuration [Ar] 3d4 4s2 is actually [Ar] 3d5 4s1, and copper’s expected [Ar] 3d9 4s2 is actually [Ar] 3d10 4s1. These occur because a half-filled or fully filled d subshell is more stable than a partially filled one, due to exchange energy and reduced electron-electron repulsion.

For arsenic, the 4p subshell is exactly half-filled (three electrons in three orbitals, each with one electron, all with the same spin). This half-filled p subshell is relatively stable, which contributes to arsenic’s tendency to gain three electrons to achieve a full octet (forming As3− in arsenides) or to share electrons in covalent compounds.

How to Write It from Scratch

If you need to derive arsenic’s configuration without memorizing it, follow these steps:

  1. Find the atomic number: arsenic is 33.
  2. List the orbitals in Aufbau order: 1s, 2s, 2p, 3s, 3p, 4s, 3d, 4p.
  3. Fill each orbital with the maximum number of electrons (s=2, p=6, d=10) until you reach 33 electrons.
  4. Write the configuration in order of increasing principal quantum number (1s, 2s, 2p, 3s, 3p, 3d, 4s, 4p) if you want the shell-order form.
  5. For the condensed form, locate the noble gas before arsenic (argon, atomic number 18) and write [Ar] followed by the remaining electrons: 3d10 4s2 4p3.

This method works for any element, though you must remember the exceptions for chromium, copper, and a few others in the d-block.

Common Mistakes and Misconceptions

A frequent error is writing 3d10 after 4p3 in the full notation, which violates the Aufbau order. Another is counting the 3d electrons as valence electrons; they are not, because they are in the third shell and are not involved in bonding for arsenic. Some students also confuse arsenic’s configuration with that of selenium (Se, atomic number 34), which has one more electron: [Ar] 3d10 4s2 4p4. The difference is just one 4p electron.

Another misconception is that the 4s subshell is always lower in energy than the 3d subshell. This is true for neutral atoms in the first transition series, but after the 3d subshell is partially filled, the 4s electrons are actually higher in energy. When arsenic forms a cation, the 4s electrons are removed first, not the 3d electrons. So As3+ has the configuration [Ar] 3d10 4s0 4p0, which is often written [Ar] 3d10.

Why It Matters in Chemistry

Electron configuration is the foundation for understanding periodic trends, bonding, and reactivity. For arsenic, the configuration explains:

  • Its position in Group 15 and Period 4 of the periodic table.
  • Its common oxidation states (+3 and +5) and why it forms covalent compounds like arsine (AsH3) rather than ionic ones with most nonmetals.
  • Its semimetallic (metalloid) character: arsenic has properties of both metals and nonmetals, which is partly due to the half-filled 4p subshell and the presence of the 3d electrons that increase effective nuclear charge.
  • Its use in doping semiconductors: adding arsenic to silicon or germanium introduces extra valence electrons, creating an n-type semiconductor.

For students, knowing the configuration also helps predict the shapes of molecules (via VSEPR theory) and the magnetic properties of compounds. Arsenic’s five valence electrons allow it to form three or five bonds, leading to trigonal pyramidal (AsH3) or trigonal bipyramidal (AsF5) geometries.

Frequently Asked Questions

What is the full electron configuration of arsenic?

The full configuration is 1s2 2s2 2p6 3s2 3p6 3d10 4s2 4p3. In condensed form, it is [Ar] 3d10 4s2 4p3.

How many valence electrons does arsenic have?

Arsenic has five valence electrons: two in the 4s subshell and three in the 4p subshell. The 3d electrons are not valence electrons because they are in the third shell and are not involved in chemical bonding.

Why is arsenic’s configuration not an exception like chromium?

Arsenic’s configuration follows the Aufbau rule without any special stability gain. The 4p subshell is half-filled, which is stable, but the energy cost of promoting an electron from 4s to 3d would be too high. Chromium’s exception occurs because a half-filled 3d subshell (d5) is much more stable than d4, and the energy difference is small enough to justify the promotion.

What is the electron configuration of As3+?

When arsenic loses three electrons to form As3+, it loses the two 4s electrons and one 4p electron. The configuration becomes [Ar] 3d10 4s0 4p0, often written simply as [Ar] 3d10. The 3d electrons are retained because they are lower in energy than the 4p electrons for the cation.

Does arsenic have an unpaired electron?

Yes, arsenic has three unpaired electrons in the 4p subshell. Each of the three 4p orbitals (4px, 4py, 4pz) contains one electron, all with the same spin, according to Hund’s rule. This makes arsenic paramagnetic in its atomic state.

How does arsenic’s configuration relate to its position in the periodic table?

Arsenic is in Period 4, so it has four shells (n=1 to 4). It is in Group 15, which means it has five valence electrons (ns2 np3). The filled 3d subshell is a result of being in the fourth period, where the 3d orbitals are filled for the transition metals that precede it in the periodic table.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →