molecalculator

Moles & Molar Mass

Atomic Mass of Glucose (C6H12O6)

Calculator No. 01-9817 · Updated · Formula and assumptions shown below

Molarity 0.2000 mol/L
Concentration in millimolar
200.00 mM
= Molarity × 1000
Mass of solute
2.922 g
Set in the form below
Molar mass
58.44 g/mol
Set in the form below
You enter
Mass of solute (g), Molar mass (g/mol), Final solution volume (mL)
You get
Molarity (mol/L), Concentration in millimolar (mM)
Rounding
4 dp · 2 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

The atomic mass of glucose (C6H12O6) is 180.156 g/mol, often rounded to 180.16 g/mol. This is the molar mass, which is the sum of the atomic weights of all atoms in one molecule of glucose.

Formula

The molar mass (M) of a compound is the sum of the atomic masses (in g/mol) of each element multiplied by the number of atoms of that element in the molecular formula:

M(C6H12O6) = 6 × Ar(C) + 12 × Ar(H) + 6 × Ar(O)

Where Ar(C) = 12.011 g/mol, Ar(H) = 1.008 g/mol, Ar(O) = 15.999 g/mol (IUPAC abridged standard atomic weights). Plugging in:

M = 6(12.011) + 12(1.008) + 6(15.999) = 72.066 + 12.096 + 95.994 = 180.156 g/mol.

This value is used to convert between mass of glucose and amount in moles, and to prepare solutions of known molarity.

Worked Example

Suppose you need to prepare 250 mL of a 0.200 mol/L glucose solution. How many grams of glucose do you weigh out?

Step 1: Convert volume to liters: 250 mL = 250 / 1000 = 0.250 L.

Step 2: Use the molarity formula: n = c × V = 0.200 mol/L × 0.250 L = 0.0500 mol.

Step 3: Convert moles to mass: m = n × M = 0.0500 mol × 180.156 g/mol = 9.0078 g.

So you weigh out 9.008 g of glucose (rounded to 9.01 g). The calculator above uses the same logic: enter mass of solute (9.008 g), molar mass (180.156 g/mol), and volume (250 mL) to get molarity = 0.2000 mol/L.

Assumptions

  • Glucose is anhydrous (no water of crystallization).
  • The solute is pure and completely dissolves.
  • Final volume is measured after dissolution, not the volume of solvent added.
  • Temperature is 25 °C (density effects negligible for dilute solutions).

Why the Molar Mass Matters

In biochemistry and clinical chemistry, glucose molar mass is used to convert between mg/dL and mmol/L. For example, a blood glucose reading of 90 mg/dL equals 90 / 180.156 = 0.4996 mmol/L, or about 5.0 mmol/L. The molar mass also appears in osmotic pressure calculations, enzyme kinetics (Michaelis-Menten), and fermentation stoichiometry.

Glucose exists as two anomers (α and β) in solution, but both have the same molecular formula and molar mass. The cyclic form (glucopyranose) has the same atomic composition as the open-chain form, so the molar mass is identical.

Common Mistakes and How to Avoid Them

  • Using the atomic number instead of atomic mass – atomic number is the number of protons, not the mass. For carbon, atomic number is 6, but atomic mass is 12.011.
  • Forgetting to multiply by the subscript. Glucose has 6 carbons, not 1. A common error is using 12.011 + 1.008 + 15.999 = 29.018 g/mol, which is wrong.
  • Rounding too early. If you round each element to 12, 1, and 16, you get 180 g/mol, which is acceptable for rough work but not for precise molarity calculations. Use 180.156 for lab work.
  • Confusing molar mass with molecular weight in Daltons. Numerically they are the same, but units differ: g/mol vs. Da (or u). One molecule of glucose has a mass of 180.156 Da.

Glucose vs. Other Sugars

Glucose is a monosaccharide with the formula C6H12O6. Fructose also has the same formula (isomer), so its molar mass is also 180.156 g/mol. Sucrose (table sugar) is a disaccharide of glucose and fructose, with formula C12H22O11, giving a molar mass of 342.30 g/mol. Lactose (milk sugar) also has the same formula as sucrose, so it also has 342.30 g/mol. Knowing the difference is essential for preparing sugar solutions in food science and microbiology.

How to Use the Calculator

Enter the mass of glucose (or any solute) in grams, the molar mass in g/mol, and the final volume in mL. The calculator returns molarity in mol/L and millimolar. For glucose, set the molar mass to 180.156. If you are using a different solute, change the molar mass accordingly. The calculator works for any solute, not just glucose.

For example, to make 500 mL of a 0.5 M glucose solution, enter mass = 45.039 g (0.5 × 0.5 × 180.156), molar mass = 180.156, volume = 500 mL. The result is 0.5000 mol/L.

Frequently Asked Questions

Is the atomic mass of glucose the same as its molecular weight? Yes, numerically they are identical. Atomic mass (or molar mass) is expressed in g/mol, while molecular weight is often expressed in Daltons (Da) or atomic mass units (u). One mole of glucose weighs 180.156 g, and one molecule weighs 180.156 Da.

Why is glucose’s molar mass not a whole number? Because the atomic masses of carbon, hydrogen, and oxygen are averages of their naturally occurring isotopes. Carbon-12 is exactly 12, but carbon-13 and carbon-14 shift the average to 12.011. Similarly, hydrogen has deuterium and oxygen has oxygen-17 and oxygen-18.

How many atoms are in one molecule of glucose? 24 atoms: 6 carbon, 12 hydrogen, and 6 oxygen. In one mole of glucose (180.156 g), there are 6.022 × 1023 molecules, so the total number of atoms is 24 × 6.022 × 1023 ≈ 1.445 × 1025 atoms.

Can I use the same molar mass for glucose monohydrate? No. Glucose monohydrate (C6H12O6·H2O) has an extra water molecule, so its molar mass is 180.156 + 18.015 = 198.171 g/mol. If you weigh the monohydrate but use the anhydrous molar mass, your solution will be too dilute.

Does the molar mass of glucose change with temperature or pH? No. Molar mass is a fixed property of the molecule. However, the volume of a solution changes slightly with temperature, which can affect molarity (mol/L). For precise work, prepare solutions at the temperature you will use them, or use molality (mol/kg) instead.

What is the difference between atomic mass and molar mass? Atomic mass refers to a single atom (e.g., carbon atom = 12.011 u). Molar mass refers to one mole of a substance (e.g., glucose = 180.156 g/mol). For a molecule, the molar mass is the sum of the atomic masses of all atoms in the molecular formula.

Related

Formula used
in m | Mass of solute | g | 2.922 | 0
in mm | Molar mass | g/mol | 58.44 | 0.001
in v | Final solution volume | mL | 250 | 0.001
out c | Molarity | mol/L | m / mm / (v / 1000) | 4
out cmm | Concentration in millimolar | mM | c * 1000 | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →