The atomic mass of a proton is about 1.007276 u (unified atomic mass units), that of a neutron is about 1.008665 u, and that of an electron is about 0.00054858 u. In kilograms, these are approximately 1.67262 × 10−27 kg, 1.67493 × 10−27 kg, and 9.10938 × 10−31 kg, respectively.
Formula
The atomic mass unit (u) is defined as exactly one-twelfth the mass of a carbon-12 atom. The masses of the three subatomic particles are usually given in u, where 1 u = 1.66053906660 × 10−27 kg. The calculator above multiplies the mass of one particle (in u) by the number of particles you enter, then converts the result to kilograms using that conversion factor.
Symbolically: Total mass (u) = m × n, where m is the mass per particle in u and n is the number of particles. For kilograms: Total mass (kg) = m × n × 1.66053906660 × 10−27.
Worked Example
Using the default values (m = 1.007276 u, n = 1):
- Total mass in u = 1.007276 × 1 = 1.007276 u.
- Convert to kg: 1.007276 × 1.66053906660 × 10−27 = 1.67262 × 10−27 kg.
The calculator shows 1.007276 u and 1.67262 × 10−27 kg, matching the proton mass.
Assumptions
- The atomic mass unit is based on carbon-12 (exactly 12 u).
- Particle masses are the accepted CODATA 2018 values.
- Mass is additive; binding energy is ignored (this matters only for nuclei, not individual particles).
Why These Numbers Matter
The proton and neutron masses are nearly identical, while the electron is about 1/1836 of a proton. This difference explains why nearly all of an atom’s mass is in its nucleus. Chemists use these values to calculate atomic masses, isotopic abundances, and mass defects. For example, the mass of a carbon-12 atom is exactly 12 u, but the sum of its 6 protons, 6 neutrons, and 6 electrons is slightly more (about 12.0989 u) because of nuclear binding energy – the missing mass is released as energy when the nucleus forms.
How to Measure Particle Masses
Scientists measure these masses using mass spectrometry. In a mass spectrometer, charged particles (ions) are deflected by magnetic and electric fields; the amount of deflection depends on their mass-to-charge ratio. By comparing the deflection of a proton or electron to a known standard (like carbon-12), the mass can be determined to high precision. The electron mass is also derived from spectroscopic measurements of hydrogen-like atoms, where the energy levels depend on the electron’s mass.
Common Misconceptions
- “Proton and neutron have exactly the same mass.” They are close, but the neutron is about 0.14% heavier (1.008665 u vs 1.007276 u). This small difference is why free neutrons decay (half-life ~10 minutes) while protons are stable.
- “Atomic mass unit is the mass of a proton.” No – the u is defined from carbon-12, not from a proton. A proton is slightly lighter than 1 u.
- “Electrons have negligible mass.” In chemistry, yes, but in physics the electron’s mass is crucial, e.g., in beta decay and in the mass of atoms.
How to Use the Calculator
Enter the mass of a particle (in u) and the number of particles. For example, to find the mass of 10 neutrons, enter m = 1.008665 and n = 10, giving 10.08665 u or 1.67493 × 10−26 kg. This is useful for estimating the mass of a nucleus (ignoring binding energy) or for converting between u and kg in homework problems. The conversion factor is exact: 1 u = 1.66053906660 × 10−27 kg.
Limitations and Precision
The masses given are for free particles at rest. In an atom, the electron’s mass is slightly reduced by its binding energy (by less than 0.01%), and the proton and neutron masses inside a nucleus differ from free-particle values due to binding energy. For most chemistry calculations (molar masses, stoichiometry), these differences are far too small to matter – you use the atomic weights from the periodic table, which already account for isotopic mixtures. If you need extreme precision for physics, consult the CODATA recommended values, which are updated periodically.
Frequently Asked Questions
Why is the neutron heavier than the proton?
The neutron consists of one up quark and two down quarks, while the proton has two up and one down. The down quark is slightly heavier than the up quark, and electromagnetic and strong-force interactions also contribute. The net result is that the neutron is about 1.29 MeV/c² heavier (in energy units) – enough to make it unstable when free.
What is the mass of an electron in atomic mass units?
It is 0.000548579909 u (about 5.4858 × 10−4 u). In kilograms, that is 9.1093837015 × 10−31 kg. To get the mass of an electron in u, you can divide its kg mass by 1.66053906660 × 10−27.
How many electrons make up one proton’s mass?
About 1836 electrons. Dividing the proton mass (1.007276 u) by the electron mass (0.00054858 u) gives 1836.15. This ratio is often quoted as “the electron is 1/1836 the mass of a proton.”
Why is the atomic mass of carbon-12 exactly 12 u?
Because the atomic mass unit is defined as exactly 1/12 the mass of a carbon-12 atom. This definition was adopted in 1961, replacing the older oxygen-based scale. So carbon-12 is the reference point, and its atomic mass is exactly 12 u by definition.
Do protons and neutrons have the same mass in all atoms?
No, but the variation is tiny. The mass of a proton or neutron inside a nucleus is slightly different from its free-particle mass due to binding energy. For example, the mass of a bound proton is about 0.1% less than a free proton. These differences are relevant in nuclear physics but negligible in chemistry.
What is the total mass of an atom? Add proton, neutron, and electron masses?
Roughly yes, but you must subtract the nuclear binding energy. For a carbon-12 atom, the sum of 6p + 6n + 6e masses is about 12.0989 u, but the actual mass is 12 u exactly. The difference (0.0989 u) is the mass equivalent of the binding energy that holds the nucleus together. This is why atomic masses are not simple sums of particle masses.
Related
Formula used
in m | Mass of particle | u | 1.007276 | 0 in n | Number of particles | - | 1 | 0 out total | Total mass | u | m * n | 6 out totalkg | Total mass in kg | kg | m * n * 1.66053906660e-27 | 6
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Normality to g/L Converter & Formula29.220 g/L
- Normality to meq/mL Conversion Calculator1.0000 meq/mL
- Normality Test Q-Q Plot: How to Read It
- Normality Test Results: How to Analyze Them
- Normality Slay the Spire?
- Normality Test for Paired t Test: How to Check