molecalculator

Moles & Molar Mass

Atomic Number 45 Electron Configuration

Guide 01-9454 · Updated · Step by step

The electron configuration for an atom of rhodium (atomic number 45) in its ground state is [Kr] 4d8 5s1. This means the 45 electrons are arranged with 36 in the krypton core, 8 in the 4d subshell, and 1 in the 5s subshell, an exception to the usual filling order.

Background: Rhodium and Its Place in the Periodic Table

Rhodium is a hard, silver-white metal belonging to the platinum group metals (PGMs) in group 9, period 5 of the periodic table. Its atomic number, 45, tells you it has 45 protons in its nucleus and, in a neutral atom, 45 electrons. The element was discovered in 1803 by William Hyde Wollaston, who named it after the Greek word rhodon (rose) because its salts form a rose-colored solution. Rhodium is rare, with an average crustal abundance of about 0.0001 ppm, and is primarily obtained as a byproduct of nickel and platinum mining. Its main uses are in catalytic converters for vehicles, as a hardening agent for platinum and palladium, and in electrical contacts because of its high corrosion resistance and reflectivity.

How Electron Configurations Work

Electron configurations describe how electrons are distributed among the atomic orbitals. The Aufbau principle states that electrons fill the lowest-energy orbitals first, following the order given by the Madelung rule: 1s, 2s, 2p, 3s, 3p, 4s, 3d, 4p, 5s, 4d, 5p, 6s, 4f, 5d, 6p, 7s, 5f, 6d, 7p. Each orbital can hold a maximum of two electrons with opposite spins (Pauli exclusion principle), and for degenerate orbitals (same energy), electrons fill singly before pairing (Hund’s rule).

For rhodium, if you follow the Aufbau order strictly, you would expect [Kr] 4d7 5s2. However, the actual ground-state configuration is [Kr] 4d8 5s1. This is because the energy difference between the 4d and 5s subshells is very small, and the stability gained by having a half-filled or completely filled d subshell (or, in this case, a higher d occupancy) can outweigh the small cost of promoting an electron from 5s to 4d. For rhodium, the exchange energy and reduced electron-electron repulsion in the 4d8 configuration make it slightly lower in energy than 4d75s2.

Writing the Configuration Step by Step

Here is how you build the rhodium configuration from scratch:

  1. Start with krypton (atomic number 36) as the noble gas core: [Kr] represents 1s2 2s2 2p6 3s2 3p6 3d10 4s2 4p6.
  2. Add the remaining 9 electrons (45 – 36 = 9).
  3. Following the Aufbau order, you would fill 5s2 then 4d7. But due to the exception, the actual order is 4d8 5s1.
  4. Write the full configuration: 1s2 2s2 2p6 3s2 3p6 3d10 4s2 4p6 4d8 5s1.

The noble gas shorthand is [Kr] 4d8 5s1, which is the most commonly used form.

Common Misconceptions and Related Exceptions

A frequent error is to assume that all transition metals follow the Aufbau rule exactly. Rhodium is one of several exceptions. Others include:

  • Chromium (Z=24): [Ar] 3d5 4s1 instead of 3d4 4s2.
  • Copper (Z=29): [Ar] 3d10 4s1 instead of 3d9 4s2.
  • Niobium (Z=41): [Kr] 4d4 5s1.
  • Palladium (Z=46): [Kr] 4d10 5s0 – even more extreme.

These exceptions arise from the subtle balance of electron-electron repulsion, exchange energy, and the radial distribution of the d orbitals. In rhodium’s case, the 4d orbitals are slightly lower in energy than the 5s, so filling the 4d subshell with one more electron is favored.

Why It Matters: Chemical Behavior

The electron configuration determines rhodium’s chemical properties. With a nearly full 4d subshell, rhodium tends to lose electrons to achieve a stable configuration, commonly exhibiting oxidation states of +1 and +3. The +3 state is most stable, as in rhodium(III) chloride (RhCl3). The 5s1 electron is relatively easy to remove, which explains why rhodium forms compounds readily. Its catalytic activity in hydrogenation and hydroformylation reactions is tied to its ability to change oxidation states and coordinate with ligands. In catalytic converters, rhodium helps reduce nitrogen oxides (NOx) to nitrogen gas, a process that relies on its electron-accepting and donating abilities.

Practical Applications and Context

Knowing the electron configuration is not just academic; it helps predict bonding and reactivity. For instance, rhodium’s high melting point (1,964 °C) and resistance to oxidation are consistent with its strong metallic bonding, which arises from the delocalized d electrons. In the jewelry industry, rhodium plating is used to give white gold a reflective, scratch-resistant finish. In chemistry labs, rhodium complexes are used as catalysts in asymmetric hydrogenation, a reaction that earned the 2001 Nobel Prize in Chemistry (shared by William Knowles and Ryoji Noyori). The configuration also explains why rhodium is a good electrical conductor, though not as good as copper or silver.

Frequently Asked Questions

What is the full electron configuration of rhodium?

The full configuration is 1s2 2s2 2p6 3s2 3p6 3d10 4s2 4p6 4d8 5s1. The shorthand is [Kr] 4d8 5s1.

Why is rhodium’s configuration an exception?

Because the energy difference between the 4d and 5s subshells is very small, and the electron configuration with a higher d occupation (4d8) is slightly lower in total energy than the one predicted by the simple Aufbau rule (4d75s2). This is due to reduced electron-electron repulsion and increased exchange energy.

What is the electron configuration of Rh3+?

When rhodium loses three electrons to form Rh3+, the electrons are removed from the highest-energy orbitals first. That means the 5s electron is removed first, then two from the 4d subshell, giving [Kr] 4d6. So the configuration of Rh3+ is [Kr] 4d6.

Is rhodium magnetic?

Bulk rhodium is paramagnetic, meaning it is weakly attracted to a magnetic field. This is because it has unpaired electrons in its 4d subshell (4d8 has two unpaired electrons). However, the effect is very weak and not noticeable in everyday use.

How does rhodium’s configuration compare to cobalt?

Cobalt (Z=27) is in group 9, period 4, so it has the configuration [Ar] 3d7 4s2. Rhodium is directly below cobalt, but it has the exception [Kr] 4d8 5s1. The difference arises because the 4d orbitals are more diffuse and lower in energy relative to the 5s than the 3d orbitals are relative to the 4s.

Can you predict the configuration of iridium (Z=77)?

Iridium is below rhodium in group 9, period 6. Its expected configuration is [Xe] 4f14 5d7 6s2, but the actual is [Xe] 4f14 5d7 6s2 (no exception). This is because the 5d orbitals are more stabilized by relativistic effects, making the 6s2 configuration more favorable. So iridium follows the Aufbau rule, unlike rhodium.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →