molecalculator

Moles & Molar Mass

Atomic Number 57 Electronic Configuration Explained

Calculator No. 01-9457 · Updated · Formula and assumptions shown below

The calculator on this page is switched off while it is checked. The formula is below, and the worked example shows how to do the sum by hand.

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

Atomic number 57 is lanthanum (La), and its ground-state electronic configuration is [Xe] 5d1 6s2. This means lanthanum has 57 electrons arranged as the complete xenon core (54 electrons) plus one electron in the 5d subshell and two in the 6s subshell. The configuration is often written in full as 1s2 2s2 2p6 3s2 3p6 3d10 4s2 4p6 4d10 5s2 5p6 5d1 6s2.

Formula

The electronic configuration is built by applying the Aufbau principle (fill orbitals in order of increasing energy), the Pauli exclusion principle (each orbital holds at most two electrons with opposite spins), and Hund’s rule (degenerate orbitals fill singly before pairing). The order of filling for lanthanum is:

1s → 2s → 2p → 3s → 3p → 4s → 3d → 4p → 5s → 4d → 5p → 6s → 4f → 5d

For Z = 57, you count electrons until you reach 57. The sum of superscripts in the full configuration equals the atomic number: 2+2+6+2+6+10+2+6+10+2+6+1+2 = 57.

Worked Example

Using the default Z = 57:

  1. Fill 1s: 2 electrons (total 2)
  2. Fill 2s: 2 (total 4)
  3. Fill 2p: 6 (total 10)
  4. Fill 3s: 2 (total 12)
  5. Fill 3p: 6 (total 18)
  6. Fill 4s: 2 (total 20)
  7. Fill 3d: 10 (total 30)
  8. Fill 4p: 6 (total 36)
  9. Fill 5s: 2 (total 38)
  10. Fill 4d: 10 (total 48)
  11. Fill 5p: 6 (total 54) — this completes the xenon core
  12. Fill 6s: 2 (total 56)
  13. Place the last electron in 5d: 1 (total 57)

Result: [Xe] 5d1 6s2. The valence electrons (those in the outermost shell, n=6) are the two 6s electrons plus the single 5d electron, giving 3 valence electrons.

Assumptions

  • The configuration is for the ground state (lowest energy) of a neutral, isolated lanthanum atom.
  • The Aufbau order used is the standard one taught in introductory chemistry (Madelung rule).
  • Exceptions to the Aufbau rule (like chromium and copper) are not considered here; lanthanum follows the predicted order.

Why Lanthanum’s Configuration Is Unusual

You might expect the 57th electron to enter the 4f subshell, because the 4f orbitals are being filled across the lanthanide series. However, for lanthanum, the 5d orbital is slightly lower in energy than 4f. This is why lanthanum is often placed in the d-block of the periodic table (group 3) rather than in the f-block. The next element, cerium (Z=58), starts filling 4f: [Xe] 4f1 5d1 6s2. This subtle energy difference is a classic example of how orbital energies are not fixed; they depend on the nuclear charge and electron–electron repulsions.

How to Read the Configuration

The notation [Xe] is a shorthand that represents the complete electron configuration of xenon (Z=54). It saves space and highlights the valence electrons. The superscripts indicate the number of electrons in each subshell. For lanthanum, the 5d1 and 6s2 are the outermost electrons and largely determine its chemical behavior. Lanthanum typically forms a +3 oxidation state by losing the two 6s electrons and the one 5d electron, giving a stable [Xe] core. This is why lanthanum compounds are usually trivalent.

Common Mistakes and Misconceptions

  • Assuming 4f is filled before 5d: For lanthanum, 5d is lower in energy than 4f. This is not a mistake in the Aufbau order; it’s a real exception that applies to the first element of the lanthanide series.
  • Counting valence electrons as 2: Some students count only the 6s electrons. But the 5d electron is also in the outermost shell (n=5 is not the outermost; n=6 is). Actually, the 5d electron is at principal quantum number 5, but it is still a valence electron because it participates in bonding. The common convention counts 5d1 + 6s2 = 3 valence electrons.
  • Writing the full configuration incorrectly: A frequent error is to put 4f1 instead of 5d1. Always check the sum: if you write 4f1 6s2, the total is still 57, but that configuration is actually the ground state of praseodymium? No—cerium is 4f15d16s2, and praseodymium is 4f36s2. So 4f16s2 would be an excited state for lanthanum.

Relation to the Periodic Table

Lanthanum sits in period 6, group 3. Its position reflects the fact that the 5d subshell starts filling here. The lanthanide series (elements 58–71) then fills the 4f subshell. This placement is why lanthanum is sometimes called a “d-block” element, even though it is often grouped with the lanthanides in common tables. The IUPAC periodic table lists lanthanum in group 3, along with lutetium, but many textbooks still show it in the f-block. Both conventions exist; the electronic configuration supports the group 3 placement.

Practical Uses of Lanthanum

Lanthanum’s electron configuration explains its chemistry, which is dominated by the +3 oxidation state. This makes lanthanum useful in:

  • Hybrid car batteries: Nickel-metal hydride batteries use a lanthanum-nickel alloy as the negative electrode.
  • Optical glass: Lanthanum oxide increases the refractive index and reduces dispersion, used in camera lenses and telescope optics.
  • Catalysts: Lanthanum-based catalysts are used in petroleum refining and in automotive exhaust systems.
  • Phosphors: Lanthanum compounds are used in fluorescent lamps and X-ray screens.

In all these applications, the stable +3 ion (La3+) is the active species, which directly stems from losing the three valence electrons.

Frequently Asked Questions

Why is lanthanum’s configuration [Xe] 5d¹ 6s² and not [Xe] 4f¹ 6s²?

Because for lanthanum, the 5d orbital has a slightly lower energy than the 4f orbital. This is due to the effective nuclear charge and electron-electron repulsions. The 4f orbitals are very diffuse and penetrate poorly, so they are higher in energy until the nuclear charge increases enough (at cerium) to stabilize them.

How many valence electrons does lanthanum have?

Lanthanum has 3 valence electrons: two in the 6s subshell and one in the 5d subshell. These are the electrons that participate in chemical bonding, and lanthanum typically loses all three to form a +3 ion.

Is lanthanum a transition metal?

Lanthanum is often considered a transition metal because it has a partially filled d subshell (5d¹) in its ground state. However, it is also classified as a lanthanide and a rare earth element. The IUPAC places it in group 3, making it a transition metal by definition.

What is the electron configuration of La³⁺?

The La³⁺ ion has lost all three valence electrons, so its configuration is simply [Xe]. This is a stable, noble-gas configuration, which explains why lanthanum compounds are so common and why the +3 state is so stable.

Does lanthanum have any exceptions to the Aufbau principle?

Lanthanum follows the Aufbau principle exactly as predicted by the Madelung rule. The only quirk is that the 5d subshell is filled before the 4f subshell, which is a known exception to the usual order where 4f is lower than 5d for later elements. For lanthanum, the order is correct.

Why is lanthanum sometimes placed in the f-block?

Because it is the first element of the lanthanide series in many periodic tables, and its chemistry is similar to the other lanthanides (all form +3 ions). However, its electron configuration places it in the d-block, which is why some periodic tables show it in group 3. Both representations are used; the configuration is the underlying truth.

Related

Formula used
in z | Atomic number Z | - | 57 | 1 | 118
out full | Full configuration | - | "1s2 2s2 2p6 3s2 3p6 3d10 4s2 4p6 4d10 5s2 5p6 5d1 6s2" | 0
out noble | Noble-gas shorthand | - | "[Xe] 5d1 6s2" | 0
out valence | Valence electrons | - | 3 | 0

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →