The element with atomic number 72 is hafnium (Hf), and its ground-state electronic configuration is [Xe] 4f14 5d2 6s2. This means that after the xenon core ([Xe] = 1s2 2s2 2p6 3s2 3p6 3d10 4s2 4p6 4d10 5s2 5p6), the 4f subshell is completely filled with 14 electrons, and the 5d and 6s subshells hold 2 electrons each. The full, unabbreviated configuration is 1s2 2s2 2p6 3s2 3p6 3d10 4s2 4p6 4d10 5s2 5p6 4f14 5d2 6s2.
How the Configuration Is Built
Electrons fill atomic orbitals following the Aufbau principle (from German aufbau, “building up”), which orders subshells by increasing energy. The commonly used order is: 1s, 2s, 2p, 3s, 3p, 4s, 3d, 4p, 5s, 4d, 5p, 6s, 4f, 5d, 6p, 7s, 5f, 6d, 7p. For hafnium (Z = 72), you count 72 electrons in this sequence:
- 1s2 (2 electrons, total 2)
- 2s2 2p6 (8 more, total 10)
- 3s2 3p6 3d10 (18 more, total 28)
- 4s2 4p6 4d10 (18 more, total 46)
- 5s2 5p6 (8 more, total 54)
- 6s2 (2 more, total 56)
- 4f14 (14 more, total 70)
- 5d2 (2 more, total 72)
Notice that the 4f subshell fills after the 6s, which is why the condensed form lists 4f before 5d. The 6s subshell is lower in energy than 4f and 5d in neutral atoms, so it fills first, but in the written configuration the subshells are ordered by principal quantum number (4f before 5d before 6s) for clarity.
Why Hafnium Is Not a Lanthanide
Because the 4f subshell is completely filled (14 electrons), hafnium does not behave like the lanthanides (elements 57–71) where 4f electrons are partially filled. Instead, hafnium sits in group 4 of the periodic table, directly below zirconium (Zr, Z = 40). Its two 5d electrons and two 6s electrons give it a +4 oxidation state as the most stable, similar to zirconium. This is why hafnium and zirconium are chemically almost identical—they share the same valence electron configuration (both have 5d2 6s2 after the appropriate noble-gas core). The only difference is the filled 4f shell in hafnium, which increases the atomic radius slightly due to the lanthanide contraction, making Hf–O bonds a bit shorter than Zr–O bonds.
Common Mistakes in Writing the Configuration
Students often misplace the 4f electrons. A frequent error is writing [Xe] 4f14 5d1 6s2 6p1 or putting 6s before 4f. The correct order by principal quantum number is 4f, then 5d, then 6s. Another mistake is forgetting that the 4f subshell holds 14 electrons, not 10—4f can hold 14 because l = 3 gives 7 orbitals × 2 electrons each. Also, do not confuse hafnium with lutetium (Z = 71), which has [Xe] 4f14 5d1 6s2; hafnium adds one more electron to the 5d subshell.
How to Verify Using the Periodic Table
You can derive the configuration from the periodic table’s block structure:
- Hafnium is in period 6, so the core is [Xe] (which ends at 5p6).
- It is in group 4, so it has 4 valence electrons (2 in 6s and 2 in 5d).
- All 4f orbitals (14 electrons) are filled because the 4f block (lanthanides) lies between barium (Z = 56) and lutetium (Z = 71).
Counting: [Xe] = 54 electrons, plus 14 (4f) = 68, plus 2 (5d) = 70, plus 2 (6s) = 72. This matches Z = 72.
Valence Electrons and Chemical Behavior
The valence electrons of hafnium are the 5d2 and 6s2 electrons—four in total. These four electrons participate in bonding, which explains why hafnium almost exclusively forms +4 compounds, such as HfO2 (hafnia) and HfCl4. The 4f electrons are core electrons and do not participate in chemical bonding. This is a key difference from the lanthanides, where 4f electrons are often involved in bonding and give rise to multiple oxidation states (e.g., +2, +3, +4). Hafnium’s chemistry is therefore much simpler, resembling zirconium and titanium (the other group 4 elements).
Hafnium’s Position in the Periodic Table
Hafnium was discovered in 1923 by Dirk Coster and George de Hevesy, who used X-ray spectroscopy to identify it in zirconium ores. Its existence was predicted by Niels Bohr based on the electronic configuration—he argued that element 72 should be a transition metal, not a lanthanide. The configuration [Xe] 4f14 5d2 6s2 confirmed that prediction. Hafnium is found in most zirconium minerals, typically at 1–5% by weight, and is separated from zirconium by solvent extraction or ion exchange because of their chemical similarity. Its high melting point (~2233 °C) and excellent corrosion resistance make it valuable in nuclear reactor control rods and in superalloys for jet engine blades.
Frequently Asked Questions
What is the full electronic configuration of hafnium?
The full configuration is 1s2 2s2 2p6 3s2 3p6 3d10 4s2 4p6 4d10 5s2 5p6 4f14 5d2 6s2. The condensed form is [Xe] 4f14 5d2 6s2.
Why is hafnium’s configuration written with 4f before 5d?
In the condensed notation, subshells are listed in order of increasing principal quantum number (n), not filling order. Since 4f has n = 4, it comes before 5d (n = 5) and 6s (n = 6). This is a convention for clarity, even though in the filling order 6s fills before 4f.
How many valence electrons does hafnium have?
Hafnium has 4 valence electrons: 2 in the 6s subshell and 2 in the 5d subshell. These are the electrons that participate in chemical bonding, leading to the +4 oxidation state.
Is hafnium a transition metal or a lanthanide?
Hafnium is a transition metal (group 4), not a lanthanide. The lanthanides are elements 57–71 (La to Lu) that have partially filled 4f subshells. Hafnium’s 4f subshell is completely filled, so it behaves as a typical d-block transition metal.
What is the electron configuration of Hf4+?
For the Hf4+ ion, the four valence electrons (5d2 6s2) are removed, leaving the core configuration [Xe] 4f14. This is why Hf4+ is often described as having a noble-gas-like core, though the 4f electrons remain.
Why does hafnium have the same valence configuration as zirconium?
Zirconium (Z = 40) has [Kr] 4d2 5s2, which is analogous to hafnium’s [Xe] 4f14 5d2 6s2. Both have two d electrons and two s electrons in their outermost shells. The filled 4f subshell in hafnium does not change the valence electron count, which is why the two elements are so similar chemically.
Assumptions and Notes
The configuration given is for a neutral, ground-state hafnium atom. Excited states and ions will have different configurations. The Aufbau principle is a useful guide but has exceptions (e.g., chromium and copper), though hafnium follows it exactly. The calculator above simply displays the known configuration for atomic number 72; it does not perform quantum mechanical calculations.
Related
Formula used
in z | Atomic number Z | - | 72 | 1 | 118 out config | Electron configuration (condensed) | - | "[Xe] 4f14 5d2 6s2" | 0 out full | Full configuration | - | "1s2 2s2 2p6 3s2 3p6 3d10 4s2 4p6 4d10 5s2 5p6 4f14 5d2 6s2" | 0 out valence | Valence electrons (5d + 6s) | - | 4 | 0
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Grams to Moles Chemistry: How to Convert0.2000 mol/L
- ug to ppb Calculator: Convert Micrograms per Liter1.00 ppb
- Convert ug/l to ppb Calculator
- CPP Calculator Ontario: How CPP Is Calculated162.12 $/month
- Grams to Moles to Molecules: How to Convert0.2000 mol/L
- Organic Chemistry Reaction Calculator: How It Works