The atomic number for K (potassium) is 19. This means every neutral potassium atom has 19 protons in its nucleus and 19 electrons surrounding it. The symbol “K” comes from the Latin word kalium, and the atomic number 19 is what uniquely defines the element on the periodic table.
Formula
The molarity (concentration) of a solution is calculated as:
c = m / (mm × V)
where:
- c = molarity in mol/L (moles per liter)
- m = mass of solute in grams (g)
- mm = molar mass of the solute in g/mol
- V = final volume of the solution in liters (L) — note the input is in mL, so you divide by 1000 to convert
This is the standard definition of molarity: moles of solute divided by liters of solution. It is the most common concentration unit in chemistry and biology labs.
Worked Example
Using the default values from the calculator: you dissolve 2.922 g of sodium chloride (NaCl, molar mass = 58.44 g/mol) in water to make a final volume of 250 mL.
First, convert the volume to liters:
250 mL = 250 / 1000 = 0.250 L
Next, calculate the number of moles of NaCl:
moles = mass / molar mass = 2.922 g / 58.44 g/mol = 0.05000 mol
Then divide by the volume in liters:
c = 0.05000 mol / 0.250 L = 0.2000 mol/L
The calculator shows 0.2000 mol/L (or 200.0 mM). This is a typical physiological salt concentration — for reference, normal saline is 0.154 M (154 mM) NaCl.
Assumptions
- The solute is pure and fully dissolves.
- The final volume is measured after the solute is added and dissolved (not the volume of solvent used).
- Temperature is assumed to be around 25 °C; molarity changes slightly with temperature because volume changes, but the effect is small for most lab work.
- The molar mass is taken from the periodic table (Na = 22.99, Cl = 35.45, sum = 58.44 g/mol).
When to Use This Calculator
You need this calculation whenever you prepare a solution with a target molar concentration. Common scenarios include:
- Making buffers for biochemistry (e.g., PBS, Tris, HEPES).
- Preparing stock solutions of salts, acids, or bases for dilutions.
- Calculating how much solid reagent to weigh out for a given volume.
- Checking the concentration of a solution you already made.
For example, if you need 500 mL of 0.5 M glucose (molar mass 180.16 g/mol), you would enter mass = 45.04 g, molar mass = 180.16, volume = 500 mL, and the calculator returns 0.5 M.
How to Read the Result
The first output is molarity in mol/L (often written as M). The second output is the same value in millimolar (mM), which is 1/1000 of a mole per liter. For most lab work, you will use either unit depending on the scale:
- Stock solutions: 0.1 to 10 M
- Working buffers: 1 to 100 mM
- Trace concentrations: µM (micromolar) or nM (nanomolar) — these are not shown directly but you can convert by multiplying by 1000 for mM or dividing by 1000 for M.
Remember that molarity refers to the amount of solute per total volume of solution, not per volume of solvent. If you add 250 mL of water to 2.922 g of NaCl, the final volume might be slightly more than 250 mL, and the concentration would be a bit lower than calculated.
Common Mistakes
- Using solvent volume instead of final volume: Always measure the final volume after dissolving. This is the most frequent error.
- Forgetting to convert mL to L: The formula requires liters; if you plug in mL directly, you get a result 1000 times too large.
- Wrong molar mass: Check whether you are using the anhydrous form or a hydrate. For example, CuSO4·5H2O has a molar mass of 249.69 g/mol, not 159.61 g/mol for anhydrous copper sulfate.
- Rounding too early: Keep at least 4 significant figures during intermediate steps to avoid rounding errors in the final concentration.
Limits of the Formula
This simple molarity formula assumes ideal behavior: the solute dissolves completely and the volume change upon dissolution is negligible. In practice, some solutes (like concentrated sulfuric acid) shrink or expand the volume when mixed with water. For precise work, you would use a volumetric flask and adjust to the mark. Also, at very high concentrations (above ~1 M), the actual activity of the solute differs from its molarity, but for most teaching and routine lab applications, this formula is accurate enough.
Frequently Asked Questions
What is the difference between molarity and molality?
Molarity (M) is moles of solute per liter of solution. Molality (m) is moles of solute per kilogram of solvent. Molality does not change with temperature because it depends on mass, not volume. Use molality for colligative properties like boiling point elevation, and molarity for titrations and dilutions.
How do I prepare a solution if I only have a hydrate?
You must include the water of hydration in the molar mass. For example, to make 1 L of 0.1 M calcium chloride from CaCl2·2H2O (molar mass 147.01 g/mol), weigh out 14.701 g, not 11.098 g (the anhydrous mass). The calculator lets you enter the correct molar mass.
Can I use this calculator for acids and bases?
Yes, for strong acids and bases that fully dissociate (like HCl or NaOH), the molarity of the solution equals the molarity of H+ or OH−. For weak acids/bases, you need the acid dissociation constant (Ka) to find the actual ion concentration, not just the formal molarity.
Why do I get a different concentration if I add water to a final mark?
Because the final volume includes the volume of the solute itself. When you dissolve a solid, the total volume is usually slightly larger than the solvent volume. That is why the correct method is to dissolve the solute in a smaller amount of solvent, then add solvent up to the final volume mark in a volumetric flask.
What does “1 M” mean in practice?
1 M means one mole of solute per liter of solution. For NaCl, one mole is 58.44 g. So 1 M NaCl is 58.44 g of NaCl dissolved in enough water to make exactly 1 liter of solution. It does not mean 58.44 g added to 1 liter of water.
Is molarity the same as concentration?
Concentration is a general term; molarity is one specific way to express it. Other units include percent by mass, parts per million (ppm), and normality. Molarity is the most useful for stoichiometry because it directly gives moles per volume.
Related
Formula used
in m | Mass of solute | g | 2.922 | 0 in mm | Molar mass | g/mol | 58.44 | 0.001 in v | Final solution volume | mL | 250 | 0.001 out c | Molarity | mol/L | m / mm / (v / 1000) | 4 out cmm | Concentration in millimolar | mM | c * 1000 | 2
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- QPP Calculator Canada: How It Works & How to Use It
- PPP Calculator World Bank: How It Works & How to Use It2,000.00
- PPP Calculator: India vs USA Cost Comparison1,000.00 USD
- PPP Calculator USD to INR: How It Works2,335 INR
- PPP Calculator India vs UK: Real Cost Comparison103.63 GBP
- PPP Calculator India vs Dubai: Real Cost Comparison8,954.58 AED