This calculator works out the binomial expansion of (1 + x)n when the power n is a negative integer or a fraction. You enter the power and the value of x (which must have an absolute value less than 1), and the calculator returns the first few terms of the infinite series, plus the general term formula. The result is an infinite series, not a finite polynomial, because negative and fractional powers never terminate.
Formula
The general binomial theorem for any real power n is:
(1 + x)n = 1 + n x + [n(n−1)/2!] x² + [n(n−1)(n−2)/3!] x³ + …
Each term is Tk = [n(n−1)(n−2)…(n−k+1) / k!] xk for k = 0, 1, 2, …
- n – the power, which can be negative, fractional, or any real number (unitless).
- x – the variable or number in the base (unitless).
- k – the term number, starting at 0 (a non‑negative integer).
- k! – factorial of k.
The binomial coefficient is written as C(n, k) or n choose k, but for negative or fractional n the usual factorial definition does not apply. Instead, the coefficient is defined by the product formula above, which is valid for all real n.
Worked Example
Using the default values from the calculator: n = −2, x = 0.5, and we want the first 5 terms.
- Term 0 (k=0): coefficient = 1, so term = 1.
- Term 1 (k=1): coefficient = n = −2, so term = −2 × 0.5 = −1.
- Term 2 (k=2): coefficient = n(n−1)/2 = (−2)(−3)/2 = 3, so term = 3 × (0.5)² = 3 × 0.25 = 0.75.
- Term 3 (k=3): coefficient = n(n−1)(n−2)/6 = (−2)(−3)(−4)/6 = −4, so term = −4 × (0.5)³ = −4 × 0.125 = −0.5.
- Term 4 (k=4): coefficient = n(n−1)(n−2)(n−3)/24 = (−2)(−3)(−4)(−5)/24 = 5, so term = 5 × (0.5)⁴ = 5 × 0.0625 = 0.3125.
Sum of first 5 terms: 1 − 1 + 0.75 − 0.5 + 0.3125 = 0.5625.
The calculator’s first output (the headline answer) shows the sum of the first 5 terms, which is 0.5625. The other outputs show the individual terms.
Assumptions
- The expansion is valid only when |x| < 1. For |x| ≥ 1 the series diverges and the result is meaningless.
- The power n is any real number; the formula works for negative integers, fractions, and even irrational numbers.
- The series is infinite; the calculator truncates at the number of terms you request. More terms give a better approximation.
- The base is exactly (1 + x). For a general binomial like (a + b)n, factor out an to get an(1 + b/a)n and then use this expansion with x = b/a.
How to Use the Calculator
Enter the power n (can be negative, e.g., −1, −2, −3, or fractional like 0.5), the value of x (must be between −1 and 1, not inclusive), and the number of terms you want (at least 2). The calculator shows the first few terms and their sum.
For example, to approximate 1/(1.1) = (1 + 0.1)−1, set n = −1, x = 0.1, and take 10 terms. The sum will approach 0.90909…, which is the true value.
Why Negative Powers Give Infinite Series
When n is a positive integer, the binomial expansion stops after n+1 terms because the coefficients become zero once k > n. For example, (1 + x)³ = 1 + 3x + 3x² + x³.
But when n is negative, the factor (n − k + 1) never becomes zero; it just keeps getting more negative. So the series continues forever. The same happens for fractional n (e.g., n = 0.5). This is why a negative-power binomial expansion is an infinite series, and why the condition |x| < 1 is crucial for convergence.
Common Mistakes and Misconceptions
- Using the standard “n choose k” formula with factorials: For negative n, n! is not defined. You must use the product formula for the coefficient.
- Ignoring the convergence condition: If |x| ≥ 1, the series diverges. For example, (1 + 2)−1 = 1/3, but plugging x = 2 into the series gives 1 − 2 + 4 − 8 + …, which does not converge to 1/3.
- Confusing the sign of terms: With negative n, the signs of coefficients alternate in a pattern that depends on n. For n = −2, the coefficients are 1, −2, 3, −4, 5, … (alternating signs).
- Not factoring out a constant: For (a + b)n, you must rewrite as an(1 + b/a)n. For example, (2 + 0.5)−1 = 2−1(1 + 0.25)−1 = 0.5 × (1 + 0.25)−1.
Practical Applications
Negative and fractional binomial expansions appear in physics and engineering when approximating expressions like 1/√(1 − v²/c²) (relativity) or (1 + ε)−1 in series expansions of potential functions. In statistics, the negative binomial distribution uses the same coefficients. In finance, compound interest formulas with negative exponents can be expanded for small rates. The key is that the expansion gives a polynomial approximation that is accurate when x is small.
Limits and Alternatives
The calculator only handles the form (1 + x)n. For a general binomial (a + b)n, you can factor as described, but if a and b are both large, the convergence may be slow. In that case, you might prefer a direct numerical evaluation using a scientific calculator or a computer algebra system.
Also, the calculator truncates the series; the error depends on the number of terms and the value of x. For x close to 1, you may need many terms for good accuracy. For x exactly 1, the series may converge conditionally (e.g., (1+1)−1 = 1/2, but the series 1 − 1 + 1 − 1 + … does not converge in the usual sense).
Frequently Asked Questions
Can I use the binomial expansion for negative powers without a calculator?
Yes, you can compute the first few terms by hand using the product formula. For example, (1 + x)−1 = 1 − x + x² − x³ + …, which is a geometric series. For n = −2, the coefficients are 1, −2, 3, −4, … as shown.
What is the difference between positive and negative power expansions?
Positive integer powers give a finite polynomial with exactly n+1 terms. Negative or fractional powers give an infinite series that converges only when |x| < 1. The coefficients are still binomial coefficients, but defined by the product formula rather than factorials.
Why does the calculator require |x| < 1?
The infinite series converges only when the absolute value of x is less than 1. If |x| ≥ 1, the terms do not decrease to zero, so the sum is undefined. For example, (1 + 2)−1 = 1/3, but the series 1 − 2 + 4 − 8 + … does not converge.
Can I use this for fractional powers like n = 0.5?
Yes, the formula works for any real n. For n = 0.5, (1 + x)0.5 = 1 + 0.5x − 0.125x² + 0.0625x³ − … This is useful for approximating square roots when x is small.
How many terms should I use for a good approximation?
It depends on x and the desired accuracy. For small x (e.g., 0.1), 5–10 terms give excellent accuracy. For x close to 1, you may need dozens of terms. The calculator lets you choose the number, so you can see how the sum changes.
What if my binomial is (a + b)^n, not (1 + x)^n?
Factor out an: (a + b)n = an(1 + b/a)n. Then set x = b/a and use the expansion. For example, (2 + 0.5)−1 = 0.5 × (1 + 0.25)−1.
Related
Formula used
in n | Power (n) | - | -2 | -10 | 10 in x | Value of x (|x| < 1) | - | 0.5 | -0.99 | 0.99 in t | Number of terms | - | 5 | 2 | 20 out a | First term | - | 1 | 1 | 1 | 6 out b | Second term | - | n * x | 6 | 6 | 6 out c | Third term | - | n * (n - 1) / 2 * x^2 | 6 | 6 | 6 out d | Fourth term | - | n * (n - 1) * (n - 2) / 6 * x^3 | 6 | 6 | 6 out e | Fifth term | - | n * (n - 1) * (n - 2) * (n - 3) / 24 * x^4 | 6 | 6 | 6
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- ug to ppb Calculator: Convert Micrograms per Liter1.00 ppb
- Grams to Moles Chemistry: How to Convert0.2000 mol/L
- Convert ug/l to ppb Calculator
- CPP Calculator Ontario: How CPP Is Calculated162.12 $/month
- Organic Chemistry Reaction Calculator: How It Works
- Grams to Moles to Molecules: How to Convert0.2000 mol/L