molecalculator

Moles & Molar Mass

Boiling Point Fahrenheit: Water & Common Liquids

Calculator No. 01-8707 · Updated · Formula and assumptions shown below

Temperature in °F 212.0 °F
Temperature in K
373.15 K
= Temperature in °C + 273.15
Temperature in °C
100 °C
Set in the form below
You enter
Temperature in °C (°C)
You get
Temperature in °F (°F), Temperature in K (K)
Rounding
1 dp · 2 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

At standard atmospheric pressure (1 atm or 101.325 kPa), the boiling point of water in Fahrenheit is exactly 212 °F. This is the temperature at which the vapor pressure of liquid water equals the surrounding atmospheric pressure, causing it to change into steam. If you are asking about other liquids, their boiling points vary widely—for example, ethanol boils at 173.1 °F and mercury at 674.1 °F—and the boiling point of any liquid changes with altitude and pressure.

Formula

The conversion from degrees Celsius (°C) to degrees Fahrenheit (°F) is:

°F = (°C × 9/5) + 32

Where:

  • °C = temperature in degrees Celsius (input)
  • °F = temperature in degrees Fahrenheit (output)

The calculator also gives the temperature in Kelvin (K), using K = °C + 273.15, because many scientific calculations require absolute temperature.

Worked Example

Using the default value of 100 °C (the boiling point of water at sea level):

  1. Multiply by 9/5: 100 × 9/5 = 180
  2. Add 32: 180 + 32 = 212 °F

So 100 °C = 212 °F, exactly the standard boiling point of water. In Kelvin: 100 + 273.15 = 373.15 K.

Assumptions

  • The temperature conversion formulas are exact definitions, not approximations.
  • The boiling point of water (100 °C) is assumed to be at standard atmospheric pressure (1 atm or 101.325 kPa).
  • Altitude and pressure changes are not accounted for in the conversion—they affect the boiling point itself, not the conversion.

Why 212 °F? The History and Science

The Fahrenheit scale was developed by Daniel Gabriel Fahrenheit in the early 18th century. He originally set 0 °F as the lowest temperature he could achieve with a salt-ice mixture, and 96 °F as human body temperature. Later, the scale was recalibrated so that water freezes at 32 °F and boils at 212 °F at standard pressure, giving a 180-degree difference between the two points. This 180-degree span is why the conversion factor is 9/5 (since 180/100 = 9/5).

Boiling occurs when the vapor pressure of a liquid equals the external pressure. At sea level, that external pressure is about 14.7 pounds per square inch (psi) or 101.325 kPa. Water’s vapor pressure reaches this value at 212 °F (100 °C). If you lower the external pressure, water boils at a lower temperature; if you increase it (like in a pressure cooker), it boils at a higher temperature.

Boiling Points of Common Liquids in Fahrenheit

Here are approximate boiling points at sea level for common substances:

  • Water: 212 °F
  • Ethanol (drinking alcohol): 173.1 °F
  • Methanol: 148.5 °F
  • Acetone: 132.8 °F
  • Mercury: 674.1 °F
  • Table salt (sodium chloride): 2575 °F (melts before boiling)
  • Iron: 5184 °F

These values assume pure substances at 1 atm pressure. Impurities (like salt in water) raise the boiling point slightly—a phenomenon called boiling point elevation.

How Altitude Changes the Boiling Point

At higher altitudes, atmospheric pressure is lower, so water boils at a lower temperature. For example:

  • At 5,000 feet (1,524 m) elevation, water boils at about 203 °F (95 °C).
  • At 10,000 feet (3,048 m), it boils at about 194 °F (90 °C).
  • On Mount Everest (29,029 ft / 8,848 m), water boils at about 160 °F (71 °C).

This is why recipes often need adjustments at high altitudes—food may take longer to cook because the water isn’t as hot. A simple rule of thumb: the boiling point drops about 1 °F for every 500 feet of altitude gain, though the exact relationship is not perfectly linear.

Why Not Always 212 °F? Pressure and Impurities

Many people mistakenly think water always boils at 212 °F. In reality, the boiling point depends on two main factors:

  1. Pressure: Lower pressure (higher altitude) lowers the boiling point; higher pressure (pressure cooker) raises it. In a pressure cooker, water can reach 250 °F or more, cooking food faster.
  2. Dissolved substances: Adding salt or sugar raises the boiling point. For example, a 10% salt solution boils at about 216 °F instead of 212 °F. This is a colligative property—it depends on the number of dissolved particles, not their identity.

Also, the concept of a “boiling point” strictly applies to pure substances. Mixtures like saltwater boil over a range of temperatures, as the composition of the vapor changes.

Fahrenheit vs. Celsius vs. Kelvin

While Fahrenheit is still used in the United States for everyday temperatures, most of the world uses Celsius, and science uses Kelvin. The conversions are:

  • °F = (°C × 9/5) + 32
  • °C = (°F − 32) × 5/9
  • K = °C + 273.15

For boiling points, the key reference points are:

  • Water boils at 212 °F, 100 °C, or 373.15 K.
  • Water freezes at 32 °F, 0 °C, or 273.15 K.

The Kelvin scale is an absolute temperature scale, meaning 0 K is absolute zero—the coldest possible temperature where molecular motion stops.

Practical Applications: Cooking and Science

Knowing the boiling point in Fahrenheit is crucial in several contexts:

  • Cooking: At sea level, boiling water for pasta is at 212 °F. At high altitudes, you may need to cook longer because the water is cooler. Candy making relies on specific boiling temperatures (e.g., soft-ball stage is 235–240 °F) to control sugar concentration.
  • Laboratory work: Distillation separates liquids based on boiling point differences. Knowing the exact boiling point of a solvent in °F (or °C) helps set heating baths and condensers.
  • Engineering: Steam systems and power plants operate at pressures where water boils at much higher temperatures. For example, at 100 psi (about 6.8 atm), water boils at about 338 °F.

Always follow your lab method, the safety data sheet (SDS) and your supervisor when working with boiling liquids in a lab.

Frequently Asked Questions

What is the boiling point of water in Fahrenheit at sea level?

At sea level (1 atm pressure), pure water boils at exactly 212 °F. This is the standard reference point on the Fahrenheit scale.

Does water boil at a lower temperature in Denver?

Yes. Denver is about 5,280 feet above sea level, where atmospheric pressure is lower. Water boils at approximately 203 °F there, not 212 °F.

Why does adding salt make water boil hotter?

Dissolved salt particles interfere with water molecules forming vapor, so a higher temperature is needed to reach boiling. This is called boiling point elevation. The effect is small for typical cooking amounts—a teaspoon of salt in a pot of water raises the boiling point by less than 1 °F.

What is the boiling point of alcohol in Fahrenheit?

Ethanol (drinking alcohol) boils at about 173.1 °F at sea level. This is lower than water, which is why alcohol evaporates faster and why distillation can separate alcohol from water.

Can water boil at room temperature?

Yes, if the pressure is low enough. In a vacuum chamber, water can boil at 70 °F (21 °C) or even lower. This is because boiling depends on vapor pressure equaling external pressure—at low pressure, less heat is needed.

Is 212 °F the boiling point of water everywhere?

No. It is only at standard atmospheric pressure (1 atm). At higher altitudes or in a vacuum, the boiling point is lower; in a pressure cooker, it is higher. The exact value depends on the surrounding pressure.

Related

Formula used
in t | Temperature in °C | °C | 100 | -273.15 | 3000
out f | Temperature in °F | °F | t * 9 / 5 + 32 | 1
out k | Temperature in K | K | t + 273.15 | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →