molecalculator

Moles & Molar Mass

Calc 2 Volume of Revolution: Disk & Shell Methods

Calculator No. 01-11971 · Updated · Formula and assumptions shown below

The calculator on this page is switched off while it is checked. The formula is below, and the worked example shows how to do the sum by hand.

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

In Calculus 2, the volume of revolution is the volume of a 3D solid formed by rotating a 2D region around an axis, and you compute it using either the disk/washer method or the cylindrical shell method. You enter the bounding functions, the axis of rotation, and the interval, and the calculator returns the exact volume using the appropriate integral formula. Below is a calculator that handles the most common case—rotating a region between y = f(x) and the x-axis (or y = 0) around the x-axis—using the disk method.

Formula

The disk method (also called the washer method when there is a hole) computes the volume by slicing the solid perpendicular to the axis of rotation into thin disks. For rotation around the x-axis, the volume is:

V = π ∫ab [f(x)² − g(x)²] dx

where:

  • f(x) is the upper function (the outer radius) in the same units as x
  • g(x) is the lower function (the inner radius, often 0 for a solid disk) in the same units
  • a and b are the lower and upper limits of integration (x-values)
  • π is the constant 3.14159…

If you rotate around the y-axis, swap x and y: V = π ∫cd [f(y)² − g(y)²] dy, where the functions are expressed as x = f(y).

Worked Example

Using the default values: f(x) = 2 (a horizontal line), g(x) = 0, a = 0, b = 2. This represents rotating the rectangle from x=0 to x=2, height 2, around the x-axis, producing a cylinder of radius 2 and length 2.

Step 1: Square the radii: f(x)² = 2² = 4, g(x)² = 0² = 0.

Step 2: Subtract: f(x)² − g(x)² = 4 − 0 = 4.

Step 3: Integrate from 0 to 2: ∫02 4 dx = 4x evaluated from 0 to 2 = 4(2) − 4(0) = 8.

Step 4: Multiply by π: V = π × 8 = 8π ≈ 25.1327 cubic units.

The calculator shows V = 25.1327 (rounded to 4 decimals), matching 8π.

Assumptions

  • The region is bounded by continuous functions on the interval [a, b].
  • For the disk method, the axis of rotation is the x-axis (y=0) or a horizontal line; the functions give radii perpendicular to that axis.
  • The solid is not self-intersecting; the functions do not cross each other within the interval (if they do, split the integral).
  • The calculator assumes the functions are given in terms of x for rotation around the x-axis; for y-axis rotation, you must rewrite them as x = f(y).

How the Disk and Washer Method Works

The idea is to approximate the solid with many thin, flat cylinders (disks). If the region has a hole (because the lower function is not zero), you subtract the inner disk, giving a washer—a disk with a hole. The radius of each disk is the vertical distance from the axis to the outer curve, and the thickness is dx. Summing the volumes of infinitely many disks gives the integral. This is a direct application of the definite integral as a limit of Riemann sums.

For rotation around the y-axis, the same logic applies but with horizontal slices: each disk has radius equal to the horizontal distance from the y-axis to the curve, and thickness dy. You must solve the functions for x in terms of y.

When to Use the Cylindrical Shell Method

The shell method is often easier when the region is defined by y as a function of x but you rotate around the y-axis (or vice versa). Instead of slicing perpendicular to the axis, you slice parallel to the axis, creating cylindrical shells. The volume formula for rotation around the y-axis is:

V = 2π ∫ab x [f(x) − g(x)] dx

where x is the radius of the shell, and f(x) − g(x) is the height of the shell. This avoids solving for x in terms of y. For rotation around the x-axis with functions in y, use V = 2π ∫cd y [f(y) − g(y)] dy.

Choose the method that gives simpler integrals. If one function is difficult to invert, the shell method is usually better.

Common Mistakes and How to Avoid Them

  • Forgetting to square the radius: The disk method requires the square of the radius; leaving it unsquared gives a linear integral, which is wrong.
  • Using the wrong axis: For rotation around the x-axis, the radius is a y-value; for the y-axis, the radius is an x-value. Mixing them up gives a completely different solid.
  • Not subtracting the inner radius: When there is a hole, you must subtract g(x)² from f(x)², not (f−g)². The latter is the area of the region, not the volume of the washer.
  • Incorrect limits: The limits a and b are the x-values where the region starts and ends, not where the curves intersect unless those are the boundaries.
  • Unit errors: If the problem gives units, the volume will be in cubic units. If you mix cm and m, the result is meaningless.

Real-World Applications and Context

Volume of revolution problems appear in engineering and physics when calculating the volume of objects with rotational symmetry: tanks, pipes, bottles, machine parts, and even the volume of a solid of revolution formed by a curve like a parabola (e.g., a paraboloid reflector). In manufacturing, knowing the volume helps estimate material needed for casting or machining. In fluid dynamics, the volume of a vessel of revolution can be computed without measuring it directly, just from its profile.

For example, a wine glass with a profile given by y = x² rotated around the y-axis from y=0 to y=4 has volume V = π ∫04 (√y)² dy = π ∫04 y dy = π(8) = 8π ≈ 25.13 cubic units. This matches the disk method with x = √y.

Frequently Asked Questions

What is the difference between disk and washer method? The disk method is for a solid with no hole; the washer method is for a solid with a hole, where you subtract the inner disk’s volume. Both use the same integral formula, but the washer method has two radii.

When should I use the shell method instead of the disk method? Use the shell method when the region is easier to describe with vertical slices (y as a function of x) but you rotate around the y-axis, or when solving for the inverse function is messy. The shell method often avoids that inversion.

Can I rotate around a line that is not an axis? Yes, you can rotate around any horizontal or vertical line, such as y = 1 or x = −2. In that case, the radius is the distance from the curve to that line. For example, rotating around y = 1, the outer radius is f(x) − 1, and the inner radius is g(x) − 1 (if the region is above the line). The formula becomes V = π ∫ [ (f(x)−1)² − (g(x)−1)² ] dx.

What if the functions cross each other within the interval? You must split the integral at the crossing points, because the upper and lower functions swap. The volume is the sum of the integrals over each subinterval where one function is consistently above the other.

Does the calculator handle rotation around the y-axis? The current calculator is set for rotation around the x-axis with functions in x. For the y-axis, you would need to rewrite the functions as x = f(y) and integrate over y, which you can do by swapping the roles of x and y in the formula manually.

Why is the volume sometimes infinite? If the region extends to infinity (improper integral), the volume may converge or diverge. For example, rotating y = 1/x from x=1 to infinity around the x-axis gives a finite volume (π), known as Gabriel’s horn, even though the surface area is infinite. This is a classic paradox.

Limits of the Formula and Practical Tips

The disk and shell methods work for solids of revolution with continuous, non-negative radii. If the region is not simply connected (e.g., has a gap), you need to break it into parts. The formulas assume the axis of rotation does not pass through the region; if it does, the solid may self-intersect, and the method fails. In practice, always sketch the region and the solid to visualize the radii and limits. Double-check that your functions are the correct radii, not the original curves. For complex shapes, numerical integration (like Simpson’s rule) can approximate the integral, but the exact answer requires the antiderivative.

Related

Formula used
in f | Upper function f(x) | - | 2 | 0
in g | Lower function g(x) | - | 0 | 0
in a | Lower limit a | - | 0 | 0
in b | Upper limit b | - | 2 | 0
out V | Volume | cubic units | pi * integral((f - g)^2, a, b) | 4

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →