molecalculator

Moles & Molar Mass

Calcium Phosphate Molecular Formula & Uses

Calculator No. 01-12016 · Updated · Formula and assumptions shown below

Moles of Ca3(PO4)2 0.3224 mol
Moles of Ca2+ ions
0.9672 mol
= Moles of Ca3(PO4)2 × 3
Moles of PO4^3- ions
0.6448 mol
= Moles of Ca3(PO4)2 × 2
Mass of Ca3(PO4)2
100 g
Set in the form below
You enter
Mass of Ca3(PO4)2 (g), Molar mass of Ca3(PO4)2 (g/mol)
You get
Moles of Ca3(PO4)2 (mol), Moles of Ca2+ ions (mol), Moles of PO4^3- ions (mol)
Rounding
4 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

The molecular formula for calcium phosphate is Ca3(PO4)2. This compound consists of three calcium ions (Ca2+) and two phosphate ions (PO43−), giving a neutral ionic compound.

Formula

The formula Ca3(PO4)2 represents the repeating unit of the ionic lattice. Each formula unit contains:

  • 3 calcium ions (Ca2+), each with a +2 charge
  • 2 phosphate ions (PO43−), each with a −3 charge

The charges balance: 3 × (+2) = +6 and 2 × (−3) = −6. The molar mass is calculated as:

M = 3 × 40.08 (Ca) + 2 × (30.97 (P) + 4 × 16.00 (O)) = 310.18 g/mol.

Here, atomic weights are taken from the IUPAC standard: Ca = 40.08, P = 30.97, O = 16.00. In the calculator above, you enter the mass of the compound and its molar mass (default 310.18 g/mol) to get the number of moles and the moles of each ion.

Worked Example

Suppose you have 100 g of calcium phosphate (the default mass). Using the molar mass 310.18 g/mol:

  1. Moles of Ca3(PO4)2 = 100 g ÷ 310.18 g/mol = 0.3224 mol.
  2. Moles of Ca2+ = 0.3224 mol × 3 = 0.9672 mol.
  3. Moles of PO43− = 0.3224 mol × 2 = 0.6448 mol.

The calculator gives the same results: 0.3224 mol of the compound, 0.9672 mol of calcium ions, and 0.6448 mol of phosphate ions.

Assumptions

  • The compound is pure anhydrous calcium phosphate (no water of hydration).
  • Atomic weights used are the IUPAC standard values, which may vary slightly by source.
  • Complete dissociation into ions is assumed for the ion mole calculations.

Background: What Is Calcium Phosphate?

Calcium phosphate is a family of minerals and salts containing calcium and phosphate ions. The most common form is tricalcium phosphate, Ca3(PO4)2, which occurs naturally in rocks and bones. Other forms include dicalcium phosphate (CaHPO4) and monocalcium phosphate (Ca(H2PO4)2). In biological systems, calcium phosphate is the main inorganic component of bone and teeth, providing rigidity and strength.

How It Works: Ionic Bonding and Structure

Calcium phosphate is an ionic compound held together by electrostatic forces between positively charged calcium ions and negatively charged phosphate ions. In the solid state, it forms a crystalline lattice. The phosphate ion is a polyatomic ion with a tetrahedral structure, where a central phosphorus atom is bonded to four oxygen atoms. The compound is sparingly soluble in water; its solubility depends on pH, temperature, and the presence of other ions. In acidic conditions, it dissolves more readily, which is why acids can erode tooth enamel.

How to Choose the Right Form

When working with calcium phosphate in the lab or industry, you may encounter different forms:

  • Anhydrous Ca3(PO4)2 – used as a supplement, antacid, or in ceramics.
  • Hydrated forms – such as Ca3(PO4)2·H2O, which have different molar masses.
  • Hydroxyapatite – Ca10(PO4)6(OH)2, the main mineral in bone, used in implants.

Always check the exact formula and water content when calculating molar mass. For example, hydroxyapatite has a molar mass of about 1004.6 g/mol, not 310.18 g/mol.

Common Problems and Misconceptions

A frequent mistake is confusing calcium phosphate with calcium phosphide (Ca3P2) or calcium hypophosphite. Also, some people assume the formula is CaPO4, but that would not be charge-neutral. Another common error is using the molar mass of anhydrous calcium phosphate for a hydrated sample without adjusting for water molecules. Always verify the chemical formula from the label or the reagent bottle.

Comparisons: Calcium Phosphate vs. Other Calcium Salts

Calcium phosphate is less soluble in water than calcium chloride or calcium nitrate, which are highly soluble. This low solubility makes it useful as a slow-release fertilizer and in bone graft materials. Compared to calcium carbonate (CaCO3), calcium phosphate provides both calcium and phosphorus, which is essential for plant and animal nutrition. However, calcium carbonate is often used as a cheaper calcium supplement.

Costs and Availability

Calcium phosphate is inexpensive and widely available as a laboratory reagent, food additive (E341), and fertilizer component. The price varies with purity and particle size; food-grade and pharmaceutical-grade forms cost more than technical grade. For lab calculations, the molar mass is the key factor, not the cost.

Safety and Handling

Calcium phosphate is generally considered low hazard, but as with any chemical, follow your lab method, the safety data sheet (SDS), and your supervisor. Avoid inhaling dust, and wear gloves and safety goggles when handling powders. It is not flammable, but it may release irritating dust. In case of eye contact, rinse thoroughly with water.

Frequently Asked Questions

What is the molar mass of calcium phosphate?

The molar mass of anhydrous Ca3(PO4)2 is 310.18 g/mol. This is calculated by adding the atomic masses: 3×40.08 + 2×(30.97 + 4×16.00).

Is calcium phosphate the same as tricalcium phosphate?

Yes, tricalcium phosphate is the common name for Ca3(PO4)2. It is called “tri” because it contains three calcium ions per formula unit.

Why is calcium phosphate insoluble in water?

Calcium phosphate has a very low solubility product (Ksp ≈ 2×10−29), meaning the lattice energy is high compared to the hydration energy of the ions. This makes it practically insoluble in neutral water, but it dissolves in acids.

How many atoms are in one formula unit of calcium phosphate?

One formula unit of Ca3(PO4)2 contains 3 calcium atoms, 2 phosphorus atoms, and 8 oxygen atoms, totaling 13 atoms.

What is the difference between calcium phosphate and hydroxyapatite?

Hydroxyapatite is a specific calcium phosphate with the formula Ca10(PO4)6(OH)2, containing hydroxide ions. It is the main mineral in bone and teeth. Calcium phosphate (Ca3(PO4)2) is a simpler salt without hydroxide.

Can I use the molar mass of calcium phosphate for dicalcium phosphate?

No, dicalcium phosphate (CaHPO4) has a different molar mass (136.06 g/mol). Always use the correct formula for the specific compound you are working with.

Related

Formula used
in m | Mass of Ca3(PO4)2 | g | 100 | 0
in mm | Molar mass of Ca3(PO4)2 | g/mol | 310.18 | 1
out n | Moles of Ca3(PO4)2 | mol | m / mm | 4
out nca | Moles of Ca2+ ions | mol | n * 3 | 4
out npo4 | Moles of PO4^3- ions | mol | n * 2 | 4

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →