molecalculator

Moles & Molar Mass

Calcium Phosphate Molecular Mass

Calculator No. 01-12017 · Updated · Formula and assumptions shown below

Amount of substance 1.0000 mol
Number of formula units
6.022 × 1023 (units)
Result, rounded to 2 decimal places
Mass of calcium phosphate
310.18 g
Set in the form below
Molar mass (Ca3(PO4)2)
310.18 g/mol
Set in the form below
You enter
Mass of calcium phosphate (g), Molar mass (Ca3(PO4)2) (g/mol)
You get
Amount of substance (mol), Number of formula units ((units))
Rounding
4 dp · 2 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

The molecular mass of calcium phosphate (Ca3(PO4)2) is 310.18 g/mol. This value is the sum of the atomic weights of three calcium atoms, two phosphorus atoms, and eight oxygen atoms. Below you’ll find the step-by-step calculation, the difference between molecular mass and molar mass, and practical uses in chemistry and biology.

Formula

The molecular mass (also called formula mass for ionic compounds) is calculated by adding the atomic masses of each atom in the formula:

Molecular mass = (3 × atomic mass of Ca) + (2 × atomic mass of P) + (8 × atomic mass of O)

Using IUPAC standard atomic weights:

  • Calcium (Ca): 40.078 g/mol
  • Phosphorus (P): 30.974 g/mol
  • Oxygen (O): 15.999 g/mol

So: (3 × 40.078) + (2 × 30.974) + (8 × 15.999) = 120.234 + 61.948 + 127.992 = 310.174 g/mol, often rounded to 310.18 g/mol.

Worked Example

Using the default values in the calculator (mass = 310.18 g, molar mass = 310.18 g/mol):

  1. Amount (mol) = mass / molar mass = 310.18 g / 310.18 g/mol = 1.0000 mol
  2. Number of formula units = moles × Avogadro’s number = 1.0000 mol × 6.02214076 × 1023 /mol = 6.022 × 1023 formula units

Thus, 310.18 g of calcium phosphate contains exactly one mole of formula units.

Assumptions

  • The atomic weights are the IUPAC standard abridged values (2019).
  • The compound is pure and anhydrous (no water of hydration).
  • For ionic compounds like calcium phosphate, the term “molecular mass” is technically a formula mass because no discrete molecules exist; the formula unit is used.

Why It Matters in Real Life

Calcium phosphate is a key component of bones and teeth, and it is widely used as a food additive (E341), a fertilizer, and in ceramics. Knowing its molecular mass allows chemists to prepare solutions of known concentration, calculate yields in reactions, and convert between mass and moles when studying its solubility or reactivity. For example, in a lab you might need to make a 0.1 M solution of calcium phosphate—though its low solubility (about 0.002 g/100 mL water) makes that impractical without special conditions.

Common Mistakes and Misconceptions

  • Forgetting the subscript 2 on the phosphate group: The formula is Ca3(PO4)2, not Ca3PO4. That mistake changes the mass by more than 100 g/mol.
  • Confusing molecular mass with molar mass: They are numerically identical, but molecular mass is in atomic mass units (u) while molar mass is in grams per mole (g/mol). For practical calculations, they are interchangeable.
  • Using outdated atomic weights: For instance, using 40 for Ca instead of 40.078 changes the result by about 0.2 g/mol—small but significant in precise work.
  • Assuming all calcium phosphates are the same: There are several forms: monocalcium phosphate (Ca(H2PO4)2, 234.05 g/mol), dicalcium phosphate (CaHPO4, 136.06 g/mol), and tricalcium phosphate (Ca3(PO4)2, 310.18 g/mol). Always check the formula.

How to Use the Calculator

Enter the mass of calcium phosphate you have (in grams) and its molar mass (default is 310.18 g/mol). The calculator first gives the number of moles, then the number of formula units. This is useful for stoichiometry: for example, if a reaction needs 0.5 mol of Ca3(PO4)2, you would weigh out 0.5 × 310.18 = 155.09 g.

Remember that the calculator assumes pure, anhydrous material. If you have a hydrated form (e.g., Ca3(PO4)2·H2O), you must adjust the molar mass by adding the mass of water molecules.

Safety and Handling

Calcium phosphate is generally non-toxic and is used in food supplements. However, in the lab, dust may irritate the respiratory tract. Always follow your lab method, the safety data sheet (SDS) and your supervisor when handling any chemical. Avoid inhaling fine powders and wash hands after use.

Frequently Asked Questions

What is the difference between molecular mass and molar mass?

Molecular mass is the mass of a single molecule (or formula unit) in atomic mass units (u). Molar mass is the mass of one mole of that substance in grams per mole (g/mol). They are numerically identical, so for calcium phosphate both are 310.18 (u or g/mol).

Why is calcium phosphate not a molecule?

Calcium phosphate is an ionic compound made of Ca2+ and PO43− ions arranged in a crystal lattice, not discrete molecules. Therefore, chemists use the term “formula mass” instead of “molecular mass,” though the calculation is the same.

How do I calculate the mass of phosphorus in a sample of calcium phosphate?

First find the mass fraction of phosphorus: (2 × 30.974) / 310.18 = 0.1997, or about 19.97%. Then multiply the sample mass by 0.1997. For example, 100 g of calcium phosphate contains 19.97 g of phosphorus.

Is calcium phosphate soluble in water?

Very slightly. Its solubility is about 0.002 g per 100 mL of water at 25 °C. This low solubility is why it is used in bone implants and as a slow-release fertilizer.

What is the most common mistake when calculating its molar mass?

Forgetting the subscript 2 on the phosphate group, leading to a molar mass of about 198 g/mol instead of 310 g/mol. Always double-check the formula.

Related

Formula used
in m | Mass of calcium phosphate | g | 310.18 | 0
in mm | Molar mass (Ca3(PO4)2) | g/mol | 310.18 | 0.001
out n | Amount of substance | mol | m / mm | 4
out nn | Number of formula units | (units) | n * 6.02214076e23 | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →