The standard enthalpy of combustion of ethanol (C2H5OH) is −1367 kJ/mol at 25 °C (298.15 K) and 1 atm, meaning that burning one mole of liquid ethanol to gaseous CO2 and liquid H2O releases 1367 kJ of heat. This value is for the complete combustion of the pure liquid fuel, and it is what you would use in energy calculations, calorimetry problems, and fuel-efficiency comparisons. Below we break down how this number is obtained, how to calculate it from bond energies or Hess’s law, and how to use it correctly.
Formula
The enthalpy of combustion, ΔcH°, is the heat released when one mole of a substance burns completely in oxygen under standard conditions. For ethanol:
C2H5OH(l) + 3 O2(g) → 2 CO2(g) + 3 H2O(l) ΔcH° = −1367 kJ/mol
The negative sign indicates an exothermic reaction (heat is given out). The calculator above uses the simple relation:
Heat released (kJ) = (mass of ethanol in g ÷ molar mass in g/mol) × ΔcH° (kJ/mol)
Where:
- m = mass of ethanol burned (g)
- mm = molar mass of ethanol = 46.07 g/mol (C: 12.011×2 + H: 1.008×6 + O: 15.999)
- h = standard enthalpy of combustion = −1367 kJ/mol (you can change this if you use different conditions)
- q = total heat released (kJ)
Worked Example
Using the default values from the calculator: burn 46.07 g of ethanol (exactly one mole).
- Moles of ethanol = 46.07 g ÷ 46.07 g/mol = 1.000 mol
- Heat released = 1.000 mol × (−1367 kJ/mol) = −1367 kJ
The calculator gives −1367 kJ (rounded to 1 decimal place). If you burn 1 kg (1000 g) of ethanol, you get 1000 g ÷ 46.07 g/mol = 21.71 mol, so heat = 21.71 × (−1367) = −29,700 kJ, which is −29.7 MJ/kg. The calculator shows this as 29.70 MJ/kg (the negative sign is implied in the heat output).
Assumptions
- Complete combustion to CO2(g) and H2O(l).
- Standard conditions: 25 °C (298.15 K) and 1 atm.
- Ethanol is a pure liquid at the start; water is liquid at the end.
- The enthalpy of combustion is constant over the temperature range (a good approximation for most lab calculations).
How the Value Is Determined: Bomb Calorimetry
The experimental value of −1367 kJ/mol comes from bomb calorimetry. A small sample of ethanol is placed in a sealed steel vessel (the bomb) filled with oxygen under high pressure. The bomb is submerged in a known mass of water, and the sample is ignited electrically. The temperature rise of the water, together with the heat capacity of the calorimeter, gives the heat released at constant volume (ΔcU). To convert to constant-pressure enthalpy (ΔcH), you use the relation:
ΔcH = ΔcU + ΔngasRT
where Δngas is the change in moles of gas (here, 2 mol CO2 − 3 mol O2 = −1 mol), R = 8.314 J/(mol·K), and T = 298 K. The correction is about −2.5 kJ/mol, so the constant-volume value is slightly less negative than −1367.
Calculating from Standard Enthalpies of Formation
You can also compute ΔcH° using Hess’s law and standard enthalpies of formation (ΔfH°):
ΔcH° = [2×ΔfH°(CO2) + 3×ΔfH°(H2O)] − [ΔfH°(C2H5OH) + 3×ΔfH°(O2)]
Using standard values (in kJ/mol):
- ΔfH°(CO2, g) = −393.5
- ΔfH°(H2O, l) = −285.8
- ΔfH°(C2H5OH, l) = −277.7
- ΔfH°(O2, g) = 0 (element in standard state)
Plugging in: [2×(−393.5) + 3×(−285.8)] − [−277.7 + 0] = [−787.0 + (−857.4)] + 277.7 = −1644.4 + 277.7 = −1366.7 kJ/mol. Rounded to the nearest integer, that’s −1367 kJ/mol. This matches the experimental value, confirming the accuracy of both methods.
Bond Energy Estimation (Approximate)
If you don’t have formation data, you can estimate ΔcH° from average bond energies. The idea is:
ΔH ≈ (energy to break bonds in reactants) − (energy released forming bonds in products)
For ethanol, the bonds broken are: 5 C–H, 1 C–C, 1 C–O, 1 O–H, and 3 O=O. Bonds formed: 4 C=O (in CO2) and 6 O–H (in water). Using average bond energies (kJ/mol): C–H 413, C–C 348, C–O 358, O–H 463, O=O 498, C=O 799:
- Energy to break: 5×413 + 348 + 358 + 463 + 3×498 = 2065 + 348 + 358 + 463 + 1494 = 4728 kJ
- Energy released: 4×799 + 6×463 = 3196 + 2778 = 5974 kJ
- ΔH ≈ 4728 − 5974 = −1246 kJ/mol
This is about 9% less negative than the true value because average bond energies are not exact for specific molecules. It’s a useful estimate for teaching, but never use it for precise work.
Common Mistakes and Misconceptions
- Using gaseous water instead of liquid: If H2O is taken as a gas, the enthalpy is about −1236 kJ/mol because you skip the condensation heat (44 kJ/mol per water). Always check the state symbols.
- Confusing enthalpy with internal energy: Bomb calorimetry gives ΔU, not ΔH. For this reaction, the difference is about 2.5 kJ/mol—small but not negligible in precise work.
- Sign errors: Combustion is exothermic, so ΔH is negative. Some textbooks report the “heat of combustion” as a positive number (e.g., 1367 kJ/mol), meaning heat released. Always note the sign convention.
- Per gram vs per mole: The value −1367 kJ/mol is per mole. Per gram, it’s −29.7 kJ/g. Many fuel comparisons use MJ/kg, so convert correctly.
Why It Matters: Fuel Comparisons and Applications
Ethanol is a common biofuel. Its enthalpy of combustion tells you how much energy you get per mole or per gram. Compared to gasoline (octane, C8H18), which has ΔcH° ≈ −5470 kJ/mol (or about −47.8 MJ/kg), ethanol’s energy density is lower: about 29.7 MJ/kg vs 47.8 MJ/kg. That’s why ethanol-blended fuels give slightly lower fuel economy. However, ethanol has a higher octane rating, which allows higher compression ratios in engines. In the lab, the enthalpy of combustion is used to calibrate calorimeters and to study thermochemistry.
Safety and Practical Notes
Ethanol is highly flammable. When handling it, keep away from open flames, use in a well-ventilated area, and follow your lab’s safety protocols and the safety data sheet (SDS). For combustion experiments, always use a bomb calorimeter designed for high pressures—never burn ethanol in a closed glass container. The calculator above is for study and planning only; it does not replace proper experimental measurement.
Frequently Asked Questions
Why is the enthalpy of combustion of ethanol negative?
Because combustion releases heat to the surroundings. The products (CO2 and H2O) are more stable (lower energy) than the reactants, so the reaction is exothermic and ΔH is negative.
What is the difference between enthalpy of combustion and heat of combustion?
They are often used interchangeably, but “heat of combustion” can refer to the heat released (positive number) while “enthalpy of combustion” is the thermodynamic quantity with a sign. In chemistry, ΔcH is negative for exothermic reactions.
Does the enthalpy of combustion change with temperature?
Yes, slightly. The value −1367 kJ/mol is at 25 °C. At other temperatures, you would need to use heat capacities to correct it. For most educational purposes, the change is small (a few kJ/mol over a 50 °C range).
How do I calculate the enthalpy of combustion from experimental data?
Measure the temperature change of a known mass of water in a calorimeter when a known mass of ethanol burns. Use q = mwater × cwater × ΔT, then divide by the moles of ethanol burned. Correct for the heat capacity of the calorimeter and for the difference between constant volume and constant pressure if needed.
Is the enthalpy of combustion the same for ethanol in a fuel blend?
No. The value given is for pure ethanol. In a blend (e.g., E10), the overall enthalpy is a weighted average of the components. Also, real engines don’t achieve complete combustion, so the useful energy is lower.
Why do some sources say −1367 kJ/mol and others say −1236 kJ/mol?
The difference is the state of water in the products. −1367 kJ/mol assumes liquid water; −1236 kJ/mol assumes water vapor. The latter is called the “lower heating value” (LHV), while the former is the “higher heating value” (HHV). In most chemistry contexts, the HHV is used.
Related
Formula used
in m | Mass of ethanol | g | 46.07 | 0 in mm | Molar mass of ethanol | g/mol | 46.07 | 0.001 in h | Enthalpy of combustion (per mol) | kJ/mol | -1367 | -10000 out q | Heat released | kJ | m / mm * h | 1 out qkg | Heat per kilogram | MJ/kg | q / (m / 1000) / 1000 | 2
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- QPP Calculator Canada: How It Works & How to Use It
- PPP Calculator World Bank: How It Works & How to Use It2,000.00
- PPP Calculator: India vs USA Cost Comparison1,000.00 USD
- PPP Calculator USD to INR: How It Works2,335 INR
- PPP Calculator India vs UK: Real Cost Comparison103.63 GBP
- PPP Calculator India vs Dubai: Real Cost Comparison8,954.58 AED