molecalculator

Moles & Molar Mass

Glucose C6H12O6 Molar Mass & Formula Mass

Calculator No. 01-9859 · Updated · Formula and assumptions shown below

Molarity 0.1000 mol/L
Concentration in millimolar
100.00 mM
= Molarity × 1000
Mass of glucose
18.0156 g
Set in the form below
Molar mass of glucose
180.156 g/mol
Set in the form below
You enter
Mass of glucose (g), Molar mass of glucose (g/mol), Final solution volume (mL)
You get
Molarity (mol/L), Concentration in millimolar (mM)
Rounding
4 dp · 2 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

Glucose (C6H12O6) has a formula mass of 180.156 g/mol (often rounded to 180.16 g/mol). This is the sum of the atomic weights of 6 carbon atoms, 12 hydrogen atoms, and 6 oxygen atoms, using IUPAC standard atomic weights.

Formula

The formula mass (molecular weight) of glucose is calculated by adding the atomic masses of each element in the molecular formula:

Formula mass = (6 × atomic mass of C) + (12 × atomic mass of H) + (6 × atomic mass of O)

  • C (carbon): atomic mass = 12.011 g/mol
  • H (hydrogen): atomic mass = 1.008 g/mol
  • O (oxygen): atomic mass = 15.999 g/mol

Plugging in the values: (6 × 12.011) + (12 × 1.008) + (6 × 15.999) = 72.066 + 12.096 + 95.994 = 180.156 g/mol.

Worked Example

Using the default values from the calculator above, let’s prepare 1 liter of a glucose solution with 18.0156 g of glucose (which is 0.1000 moles, since 18.0156 / 180.156 = 0.1000).

  1. Mass of glucose: m = 18.0156 g
  2. Molar mass: mm = 180.156 g/mol
  3. Volume: v = 1000 mL = 1.000 L
  4. Moles of glucose = m / mm = 18.0156 / 180.156 = 0.10000 mol
  5. Molarity = moles / volume (L) = 0.10000 / 1.000 = 0.1000 mol/L

The calculator returns 0.1000 mol/L (100.0 mM), matching the step-by-step result.

Assumptions

  • Atomic weights are IUPAC abridged standard values (H 1.008, C 12.011, O 15.999).
  • The glucose is anhydrous (no water of crystallization).
  • For solution concentration, the final volume is used, not the solvent volume.
  • The solution is assumed dilute (ideal behavior).

Why the Formula Mass Matters

Knowing the formula mass of glucose is essential for preparing solutions of known concentration, which is a routine task in biochemistry, clinical labs, and cell culture. For example, a 5% glucose solution (5 g per 100 mL) is a common intravenous fluid, and a 0.1 M glucose solution is used in many enzyme assays. Without the correct molar mass, you cannot convert between mass and moles accurately.

Glucose is a monosaccharide with the molecular formula C6H12O6. It exists as a ring structure in solution, but the molecular formula remains the same. The molar mass is identical whether you consider the open-chain or cyclic form.

How to Read the Result

The formula mass (180.156 g/mol) tells you that one mole of glucose weighs 180.156 grams. A mole contains 6.022 × 1023 molecules (Avogadro’s number). So one molecule of glucose weighs 180.156 / 6.022 × 1023 = 2.992 × 10−22 g.

In the calculator above, the first output (Molarity) is the concentration in mol/L. The second output (millimolar) is simply the molarity multiplied by 1000, which is convenient for biological work where mM is more common than M.

Common Mistakes

  • Using the wrong atomic weights: Some sources use rounded values (C=12, H=1, O=16), giving 180 g/mol. That is acceptable for rough work, but for precise lab calculations use 180.156 g/mol.
  • Forgetting to convert mL to L: When calculating molarity, volume must be in liters. Dividing by 1000 is a frequent source of error.
  • Confusing mass and moles: The formula mass is grams per mole, not grams. A 180 g sample of glucose is one mole, but 180 mg is only 1 mmol.
  • Using the volume of solvent instead of final volume: When you dissolve glucose in water and then add more water to reach a final volume, the molarity is based on the final volume, not the volume of water used.

Limits of the Formula

The formula mass is an exact sum of atomic weights, so it has no uncertainty beyond the precision of the atomic weights themselves. However, when preparing solutions, the actual concentration depends on the purity of the glucose (typically ≥99.5% for lab grade) and the accuracy of your balance and volumetric glassware. Always check the certificate of analysis for the exact purity if you need high precision.

For biological solutions, glucose is often prepared as a stock solution (e.g., 1 M) and then diluted. The molar mass does not change with concentration, but the density of the solution does, so never use the volume of water alone to make a solution by weight/volume percentage.

Frequently Asked Questions

What is the difference between formula mass and molar mass?

For a molecular compound like glucose, formula mass and molar mass are numerically identical. Formula mass is the sum of atomic masses in a formula unit (in atomic mass units, u), while molar mass is the mass of one mole of the substance (in g/mol). Since 1 u = 1 g/mol, the numbers are the same.

Why is glucose 180.156 and not 180?

Because the IUPAC standard atomic weights are not whole numbers: carbon is 12.011, hydrogen is 1.008, and oxygen is 15.999. Summing these gives 180.156. Using rounded values (12, 1, 16) gives exactly 180, which is a common approximation, but the more precise value is used in research and clinical settings.

How many moles are in 50 g of glucose?

Divide mass by molar mass: 50 g / 180.156 g/mol = 0.2775 mol. This is useful for making solutions: to get a 0.5 M solution, you would dissolve 90.078 g of glucose in enough water to make 1 liter.

Does glucose have the same formula mass as fructose?

Yes. Fructose also has the molecular formula C6H12O6, so its formula mass is also 180.156 g/mol. They are isomers, meaning they have the same atoms but different structures.

How do I prepare a 1 M glucose solution?

Weigh out 180.156 g of anhydrous glucose, dissolve it in about 800 mL of distilled water, then bring the final volume to exactly 1 liter in a volumetric flask. Mix well. The concentration will be 1.000 M.

Related

Formula used
in m | Mass of glucose | g | 18.0156 | 0
in mm | Molar mass of glucose | g/mol | 180.156 | 0.001
in v | Final solution volume | mL | 1000 | 0.001
out c | Molarity | mol/L | m / mm / (v / 1000) | 4
out cmm | Concentration in millimolar | mM | c * 1000 | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →