The molar mass of glucose (C6H12O6) is 180.156 g/mol. You calculate it by adding the atomic masses of 6 carbon atoms, 12 hydrogen atoms, and 6 oxygen atoms using the periodic table. This value is essential for converting between grams and moles in solution preparation, stoichiometry, and biochemical calculations.
Formula
The molar mass (M) of a compound is the sum of the atomic masses (in g/mol) of each element multiplied by its subscript in the chemical formula:
M(C6H12O6) = 6 × Ar(C) + 12 × Ar(H) + 6 × Ar(O)
- Ar(C) = 12.011 g/mol (carbon)
- Ar(H) = 1.008 g/mol (hydrogen)
- Ar(O) = 15.999 g/mol (oxygen)
Substituting the IUPAC abridged standard atomic weights:
M = 6 × 12.011 + 12 × 1.008 + 6 × 15.999 = 72.066 + 12.096 + 95.994 = 180.156 g/mol
This is the molar mass for the molecular formula C6H12O6, which corresponds to glucose (also called dextrose or D-glucose). The same formula applies to other hexose sugars like fructose and galactose, which are structural isomers with identical molecular formulas.
Worked Example
Let’s use the calculator above with its default values. Suppose you need to prepare 250 mL of a 0.2 mol/L glucose solution. First, calculate the mass of glucose required:
- Convert volume to liters: 250 mL ÷ 1000 = 0.250 L
- Use the molarity formula: moles = molarity × volume = 0.2 mol/L × 0.250 L = 0.0500 mol
- Convert moles to mass: mass = moles × molar mass = 0.0500 mol × 180.156 g/mol = 9.0078 g
So you would weigh out 9.008 g of glucose and dissolve it in enough water to make a final volume of 250 mL. The calculator’s default inputs (mass = 2.922 g, molar mass = 58.44 g/mol, volume = 250 mL) give a molarity of 0.2000 mol/L (0.2 M) for sodium chloride, not glucose. To check glucose, enter mass = 9.008 g, molar mass = 180.156 g/mol, and volume = 250 mL; the result will be 0.2000 mol/L as well.
Assumptions
- The atomic weights are the IUPAC abridged standard values (H = 1.008, C = 12.011, O = 15.999).
- The compound is pure, anhydrous glucose (no water of hydration).
- The solution is prepared to a final volume, not by adding a specific volume of solvent.
- The density of the solution is assumed not to affect the molarity calculation (molarity depends on volume, not mass).
Why Molar Mass Matters in Practice
Molar mass is the bridge between the microscopic world of molecules and the macroscopic world of lab measurements. When you weigh a sample on a balance, you get grams; when you run a reaction or prepare a solution, you need moles. For glucose, knowing the molar mass lets you:
- Prepare precise molar solutions (e.g., 1 M glucose for cell culture media).
- Convert between mass and moles in stoichiometric calculations, such as glucose oxidation: C6H12O6 + 6 O2 → 6 CO2 + 6 H2O.
- Calculate the concentration of glucose in blood or other fluids when given a mass per volume (e.g., 90 mg/dL = 5.0 mmol/L).
- Determine the number of molecules in a sample using Avogadro’s number (6.022 × 1023 mol−1). For example, 180.156 g of glucose contains exactly 6.022 × 1023 molecules.
In clinical chemistry, glucose molar mass is used to convert between mg/dL and mmol/L: divide the value in mg/dL by 18.0156 (which is 180.156 ÷ 10) to get mmol/L. This conversion is routine in diabetes management and lab reports.
Common Mistakes and How to Avoid Them
- Using the wrong atomic mass: Some periodic tables list 12.01 for carbon, 1.01 for hydrogen, and 16.00 for oxygen. These rounded values give 180.16 g/mol, which is fine for most work, but if you need high precision, use the IUPAC values (12.011, 1.008, 15.999).
- Forgetting to multiply by subscripts: A common error is adding 12 + 1 + 16 instead of 6×12 + 12×1 + 6×16. Always multiply each atomic mass by the number of atoms in the formula.
- Confusing molar mass with molecular weight: Molar mass has units of g/mol; molecular weight is dimensionless (relative molecular mass). In practice, the numerical values are the same, but the units matter in calculations.
- Mixing up moles and millimoles: When preparing small volumes, you might need millimoles. 1 mmol = 0.001 mol; the mass for 1 mmol of glucose is 0.180156 g (180.156 mg).
- Rounding too early: If you round the molar mass to 180 g/mol, a 0.2 mol/L solution requires 9.0 g per liter, but the exact value is 9.0078 g. For precise work, keep at least 4 significant figures.
How to Read the Calculator Result
The calculator above is set up for any solute, not just glucose. Enter the mass of solute (in grams), the molar mass (in g/mol), and the final solution volume (in mL). The first output, Molarity, is the concentration in mol/L (often written as M). The second output, Concentration in millimolar, is simply the molarity multiplied by 1000, giving mM. For glucose, if you enter 9.008 g, 180.156 g/mol, and 250 mL, you get 0.2000 mol/L and 200.00 mM. This is useful because many biological buffers and media are specified in mM.
Note that the calculator uses the formula: molarity = mass / (molar mass × volume in liters). The volume must be in liters, so the input in mL is divided by 1000 inside the expression. If you accidentally enter the volume in liters directly, the result will be off by a factor of 1000.
Comparing Glucose to Other Sugars
Glucose, fructose, and galactose all have the molecular formula C6H12O6, so they share the same molar mass of 180.156 g/mol. However, their structural differences affect their physical and chemical properties, such as sweetness, solubility, and metabolic pathways. Sucrose (table sugar) is a disaccharide of glucose and fructose with the formula C12H22O11; its molar mass is 342.296 g/mol (12×12.011 + 22×1.008 + 11×15.999). Lactose (milk sugar) is glucose + galactose, also C12H22O11, so it has the same molar mass as sucrose. This is why a 1 M solution of sucrose is about twice as concentrated in mass as a 1 M glucose solution: 342 g/L vs. 180 g/L.
When working with hydrates, such as glucose monohydrate (C6H12O6·H2O), the molar mass increases to 198.17 g/mol (180.156 + 18.015). Many commercial glucose preparations are anhydrous, but some are monohydrate; always check the label.
Frequently Asked Questions
What is the molar mass of glucose in g/mol?
The molar mass of glucose (C6H12O6) is 180.156 g/mol when using IUPAC standard atomic weights. With rounded atomic masses (C=12, H=1, O=16), it is 180 g/mol. The difference is negligible for most lab work but matters for precise analytical chemistry.
How many grams are in one mole of glucose?
One mole of glucose weighs exactly 180.156 grams. This is the molar mass expressed in grams per mole. If you have 180.156 g of pure glucose, you have 6.022 × 1023 molecules of glucose.
Why is the molar mass of glucose sometimes given as 180.16 instead of 180.156?
The difference comes from rounding the atomic masses. Using C=12.011, H=1.008, O=15.999 gives 180.156 g/mol. If you round each to two decimal places (C=12.01, H=1.01, O=16.00), you get 180.16 g/mol. Both are acceptable; the more precise value is 180.156 g/mol.
How do I convert mg/dL of glucose to mmol/L?
Divide the value in mg/dL by 18.0156 (which is 180.156 ÷ 10). For example, 90 mg/dL ÷ 18.0156 = 4.99 mmol/L, often rounded to 5.0 mmol/L. This conversion is standard in clinical chemistry because the molar mass of glucose is 180.156 g/mol.
Is the molar mass of glucose the same as its molecular weight?
Yes, numerically they are the same: 180.156. The difference is units. Molar mass has units of g/mol, while molecular weight (or relative molecular mass) is dimensionless. In everyday lab use, the terms are interchangeable.
Can I use the same molar mass for fructose or galactose?
Yes, because fructose and galactose are structural isomers of glucose with the same molecular formula C6H12O6. Their molar mass is also 180.156 g/mol. However, their chemical behavior and physical properties differ.
Related
Formula used
in m | Mass of solute | g | 2.922 | 0 in mm | Molar mass | g/mol | 58.44 | 0.001 in v | Final solution volume | mL | 250 | 0.001 out c | Molarity | mol/L | m / mm / (v / 1000) | 4 out cmm | Concentration in millimolar | mM | c * 1000 | 2
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- QPP Calculator Canada: How It Works & How to Use It
- PPP Calculator World Bank: How It Works & How to Use It2,000.00
- PPP Calculator: India vs USA Cost Comparison1,000.00 USD
- PPP Calculator USD to INR: How It Works2,335 INR
- PPP Calculator India vs UK: Real Cost Comparison103.63 GBP
- PPP Calculator India vs Dubai: Real Cost Comparison8,954.58 AED