molecalculator

Moles & Molar Mass

Calculating k for a Reversible Reaction

Calculator No. 01-11972 · Updated · Formula and assumptions shown below

The calculator on this page is switched off while it is checked. The formula is below, and the worked example shows how to do the sum by hand.

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

To calculate the rate constant k for a reversible reaction, you need the forward and reverse rate constants (kf and kr) or the equilibrium constant K plus one of them, because K = kf/kr. This page provides a calculator that determines the equilibrium constant from given forward and reverse rate constants, and explains how to extract individual k values from experimental data.

Formula

For a reversible reaction A ⇌ B, the equilibrium constant (dimensionless) is the ratio of the forward and reverse rate constants:

K = kf / kr

Where:

  • kf – forward rate constant (units depend on reaction order; for first-order, s−1)
  • kr – reverse rate constant (same units as kf)
  • K – equilibrium constant (dimensionless for same-order forward and reverse)

If you know K and one rate constant, the other is found by rearrangement: kr = kf / K or kf = K × kr.

Worked Example

Using the calculator defaults: kf = 0.05 s−1, kr = 0.02 s−1.

  1. Write the ratio: K = 0.05 / 0.02
  2. Divide: 0.05 ÷ 0.02 = 2.5

The calculator returns K = 2.5 (dimensionless). This means at equilibrium, [B] = 2.5 × [A] for a first-order reaction.

Assumptions

  • The reaction is elementary (single step) or the rate constants correspond to the overall forward and reverse processes.
  • The system is at equilibrium (forward rate = reverse rate).
  • Rate constants are measured under the same conditions (temperature, pressure, solvent).
  • Activity coefficients are neglected (ideal solution or gas).

How to Determine k from Experimental Data

For a reversible first-order reaction A ⇌ B, the concentration of A over time follows:

[A]t = [A]eq + ([A]0 − [A]eq) × e−(kf + kr)t

To extract the individual rate constants:

  1. Measure [A] at several times until equilibrium is reached.
  2. Determine [A]eq from the plateau.
  3. Plot ln(([A]t − [A]eq)/([A]0 − [A]eq)) versus time; the slope is −(kf + kr).
  4. Calculate K = ([B]eq)/([A]eq) = ([A]0 − [A]eq)/[A]eq.
  5. Solve the two equations: sum = kf + kr and ratio = kf/kr = K.

For example, if the slope gives sum = 0.07 s−1 and K = 2.5, then kf = 0.05 s−1 and kr = 0.02 s−1.

Units and Reaction Order

The units of k depend on the overall order of the reaction. For a first-order reaction, k has units of s−1. For second-order, units are M−1s−1 (or L mol−1 s−1). When forward and reverse reactions have different molecularity, the ratio kf/kr may carry units, but for the common case of A ⇌ B (both first-order), K is dimensionless. Always check that your rate constants are expressed in consistent units before dividing.

Common Mistakes and Misconceptions

  • Confusing K with k: K (equilibrium constant) is a ratio of rate constants, not a rate constant itself. It has no time dependence.
  • Using initial rates incorrectly: For reversible reactions, the initial rate only gives kf if the reverse reaction is negligible at t=0, which is often not true.
  • Ignoring temperature: Both kf and kr change with temperature, but K changes only if the reaction is exothermic or endothermic (van’t Hoff equation).
  • Unit mismatch: If kf is in s−1 and kr in min−1, you must convert to the same time unit before dividing.

Relationship to Gibbs Free Energy

The equilibrium constant relates to the standard Gibbs free energy change: ΔG° = −RT ln K, where R = 8.314 J mol−1 K−1 and T is temperature in kelvin. This is useful because you can estimate K from thermodynamic data, then combine with a measured kf to find kr. Conversely, if you measure both rate constants, you can compute ΔG°.

Frequently Asked Questions

Can I calculate k for a reversible reaction from just the equilibrium constant?

No. The equilibrium constant gives only the ratio kf/kr. To find individual values, you need at least one rate constant from kinetic experiments (e.g., relaxation methods, stopped-flow, or NMR line-shape analysis).

What if my forward and reverse reactions have different orders?

Then K = kf/kr still holds, but the units of K will reflect the difference in orders. For example, if forward is second-order (M−1s−1) and reverse is first-order (s−1), then K has units of M−1. The calculator above assumes same units for both; for different orders, convert to a common basis or use concentration-based equilibrium constants.

How does temperature affect k_f and k_r?

Both rate constants typically increase with temperature according to the Arrhenius equation: k = A e−Ea/RT. The activation energies for forward and reverse differ by the reaction enthalpy, so K changes with temperature if ΔH° ≠ 0.

Is the equilibrium constant always dimensionless?

For reactions where the sum of stoichiometric coefficients is the same on both sides (e.g., A ⇌ B), K is dimensionless. For reactions with different numbers of gas molecules or solution species, K may have units, but chemists often use standard states (1 M or 1 atm) to make it dimensionless.

Can I use this calculator for enzyme kinetics?

For simple reversible enzyme mechanisms (e.g., E + S ⇌ ES), the same principle applies, but the rate constants are often composite (e.g., kcat/KM). The calculator works if you input the effective forward and reverse constants for the overall conversion.

When performing lab experiments, always follow your lab method, the safety data sheet (SDS) and your supervisor.

Related

Formula used
in kf | Forward rate constant (k_f) | s^-1 | 0.05 | 0 | 1e6
in kr | Reverse rate constant (k_r) | s^-1 | 0.02 | 0 | 1e6
out K | Equilibrium constant | - | kf / kr | 4

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →