Ethanol is an organic chemical compound with the molecular formula C2H6O, commonly written as CH3CH2OH. It is a simple alcohol consisting of a two-carbon chain bonded to a hydroxyl group (–OH), which gives it its characteristic properties. This page explains its structure, properties, how it forms, and how to calculate its molar mass and solution concentrations.
Formula
The molecular formula C2H6O tells you that each molecule contains 2 carbon atoms, 6 hydrogen atoms, and 1 oxygen atom. The structural formula CH3CH2OH shows how those atoms are arranged: a methyl group (CH3) attached to a methylene group (CH2), which is attached to a hydroxyl group (OH). The molar mass of ethanol is calculated from the atomic weights of its elements:
- Carbon: 2 × 12.011 = 24.022 g/mol
- Hydrogen: 6 × 1.008 = 6.048 g/mol
- Oxygen: 1 × 15.999 = 15.999 g/mol
- Total = 24.022 + 6.048 + 15.999 = 46.069 g/mol, usually rounded to 46.07 g/mol.
For solution calculations, the molarity formula is:
Molarity (mol/L) = mass of solute (g) ÷ molar mass (g/mol) ÷ volume of solution (L)
where volume in mL is converted to liters by dividing by 1000.
Worked Example
Using the calculator defaults: you dissolve 2.922 g of ethanol (molar mass 46.07 g/mol) in enough water to make 250 mL of final solution.
- Convert volume to liters: 250 mL ÷ 1000 = 0.250 L
- Calculate moles of ethanol: 2.922 g ÷ 46.07 g/mol = 0.06343 mol
- Divide moles by volume: 0.06343 mol ÷ 0.250 L = 0.2537 mol/L
- Convert to millimolar: 0.2537 × 1000 = 253.7 mM
The calculator shows 0.2537 mol/L (rounded to 4 decimals) and 253.7 mM, matching the manual calculation.
Assumptions
- The solute is pure ethanol (100% anhydrous, no water).
- The final volume is measured after mixing, not the volume of solvent added.
- Temperature is 25 °C; molarity changes slightly with temperature because liquid expands.
- Dilute solution, so volume additivity is assumed.
Structure and Bonding
Ethanol belongs to the alcohol family, characterized by the hydroxyl group (–OH) bonded to a saturated carbon. The oxygen in the hydroxyl group is sp3 hybridized, giving a bent geometry around oxygen with a bond angle of about 108.5°. The carbon–oxygen bond is polar because oxygen is more electronegative than carbon, making the molecule overall polar. This polarity allows ethanol to dissolve in water (a polar solvent) and also in nonpolar organic solvents, making it a versatile solvent in chemistry and industry.
The presence of the –OH group also enables hydrogen bonding between ethanol molecules and with water. This explains why ethanol has a higher boiling point (78.4 °C) than the analogous alkane ethane (–89 °C), despite having similar molecular weight. Hydrogen bonding also makes ethanol miscible with water in all proportions.
How Ethanol Is Produced
Ethanol can be made by two main routes: fermentation and hydration of ethene. Fermentation uses yeast to convert sugars (glucose, sucrose) into ethanol and carbon dioxide:
C6H12O6 → 2 CH3CH2OH + 2 CO2
This process is used for alcoholic beverages and for biofuel production from corn, sugarcane, or other biomass. The concentration is limited to about 15% because yeast dies at higher ethanol levels; distillation is needed to concentrate it.
The industrial route hydrates ethene (C2H4) with steam in the presence of a phosphoric acid catalyst:
C2H4 + H2O → CH3CH2OH
This method produces pure ethanol without the water and flavor compounds found in fermentation.
Common Uses and Properties
Ethanol is one of the most widely used organic chemicals. Key uses include:
- As a solvent in perfumes, paints, and pharmaceuticals.
- As a fuel additive (gasoline blends like E10, E85) and as a biofuel.
- As a disinfectant in hand sanitizers and medical wipes (typically 60–70% by volume).
- As a preservative in biological specimens.
- As the intoxicating component in alcoholic beverages.
Its physical properties include a density of 0.789 g/mL at 20 °C, a flash point of 13 °C, and a refractive index of 1.361. It is flammable and burns with a pale blue flame. Ethanol is hygroscopic, meaning it absorbs water from the air, which is why anhydrous ethanol must be stored in sealed containers.
Common Mistakes in Calculations
When working with ethanol solutions, several errors are common:
- Using volume of solvent instead of solution: If you add 250 mL of water to ethanol, the final volume may be less than 250 mL due to contraction. Always use the final solution volume.
- Confusing percent by volume with molarity: “40% alcohol” on a bottle means 40 mL ethanol per 100 mL solution, not 40 g per liter. To convert, you need density.
- Forgetting to convert mL to L: Molarity is mol/L, so volume must be in liters. Dividing by 1000 is a frequent source of 10-fold errors.
- Using the wrong molar mass: Some use 46.07, others round to 46.0. For precise work, use the exact value from the periodic table.
Also note that ethanol is often sold as 95% or 96% (azeotrope with water). If you weigh 2.922 g of 95% ethanol, you actually have only 2.776 g of pure ethanol. For accurate molarity, use anhydrous ethanol or correct for purity.
Safety and Handling
Ethanol is flammable and should be kept away from open flames and sparks. It is also a central nervous system depressant; ingestion causes intoxication and can be toxic in large amounts. In the lab, handle it in a fume hood if large volumes are used, and wear gloves to avoid skin contact. Follow your lab method, the safety data sheet (SDS) and your supervisor. For disinfectant use, the CDC recommends 60–70% ethanol for effective killing of most germs; higher concentrations evaporate too quickly and are less effective.
Ethanol is also hygroscopic and can absorb moisture from the air, so keep containers tightly sealed. When diluting ethanol with water, add ethanol to water (not the reverse) to minimize heat release and splashing, though the heat is modest compared to strong acids.
Frequently Asked Questions
Is ethanol the same as alcohol?
In everyday language, “alcohol” often refers to ethanol specifically, but chemically an alcohol is any compound with a hydroxyl group (–OH) on a saturated carbon. Methanol, propanol, and isopropanol are also alcohols. Ethanol is the only alcohol safe for consumption in moderate amounts; methanol and isopropanol are toxic.
What is the difference between ethanol and methanol?
Ethanol (C2H6O) has two carbons; methanol (CH4O) has one. Methanol is highly toxic—even small amounts can cause blindness or death—while ethanol is the intoxicant in drinks. They have similar smells, which is why methanol poisoning can occur when it is mistaken for ethanol.
Why is ethanol soluble in water?
Ethanol’s hydroxyl group forms hydrogen bonds with water molecules. The short two-carbon chain is small enough that the polar –OH group dominates, making ethanol fully miscible with water. Longer alcohols like butanol (four carbons) are less soluble because the nonpolar chain becomes larger.
What is the chemical formula for ethanol?
The molecular formula is C2H6O. The condensed structural formula is CH3CH2OH, and the fully drawn structure shows a CH3 group attached to a CH2 group attached to an OH group.
How do you make a 70% ethanol solution?
Mix 70 mL of 100% ethanol with 30 mL of water to get 100 mL of solution. But because ethanol and water contract on mixing, the final volume will be slightly less than 100 mL. For precise work, measure the final volume and adjust. For disinfectant use, 70% v/v is standard.
What is the molar mass of ethanol?
The molar mass is 46.07 g/mol, calculated from 2×12.011 (C) + 6×1.008 (H) + 15.999 (O). This value is used in molarity and mole calculations.
Related
Formula used
in m | Mass of solute | g | 2.922 | 0 in mm | Molar mass | g/mol | 46.07 | 0.001 in v | Final solution volume | mL | 250 | 0.001 out c | Molarity | mol/L | m / mm / (v / 1000) | 4 out cmm | Concentration in millimolar | mM | c * 1000 | 2
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- ug to ppb Calculator: Convert Micrograms per Liter1.00 ppb
- Grams to Moles Chemistry: How to Convert0.2000 mol/L
- Convert ug/l to ppb Calculator
- CPP Calculator Ontario: How CPP Is Calculated162.12 $/month
- Grams to Moles to Molecules: How to Convert0.2000 mol/L
- Organic Chemistry Reaction Calculator: How It Works