The chemical formula of calcium phosphate is Ca3(PO4)2 for the common, stable form called tricalcium phosphate. This compound contains three calcium ions (Ca2+) and two phosphate ions (PO43−) in a neutral ionic lattice.
Formula
The formula for molarity is:
Molarity (mol/L) = mass of solute (g) ÷ (molar mass (g/mol) × volume of solution (L))
In symbols: c = m / (M × V)
- m = mass of calcium phosphate in grams (g)
- M = molar mass of calcium phosphate in grams per mole (g/mol). For Ca3(PO4)2, M = 310.18 g/mol (Ca: 40.078 × 3 = 120.234; P: 30.974 × 2 = 61.948; O: 15.999 × 8 = 127.992; total ≈ 310.18 g/mol)
- V = volume of the final solution in liters (L)
The calculator uses this formula to convert a given mass of calcium phosphate into its molar concentration when dissolved in a known volume. The second output converts the molarity to millimolar (1 mol/L = 1000 mM).
Worked Example
Suppose you dissolve 310.18 g of Ca3(PO4)2 in enough water to make 1.00 L of solution (the default values).
- Write the formula: c = m / (M × V)
- Plug in the numbers: c = 310.18 g / (310.18 g/mol × 1.00 L)
- Calculate the denominator: 310.18 × 1.00 = 310.18 g·L/mol
- Divide: 310.18 / 310.18 = 1.0000 mol/L
- Convert to millimolar: 1.0000 × 1000 = 1000.00 mM
The calculator gives the same result: 1.0000 mol/L (or 1000.00 mM).
Assumptions
- The solute is pure anhydrous tricalcium phosphate, Ca3(PO4)2.
- The solution is dilute enough that the molar mass remains constant and no precipitation occurs.
- The final volume is used, not the volume of solvent added (the calculator assumes you add solute and then bring the total volume to the specified value).
- Temperature is assumed to be room temperature (≈25 °C) for the molarity calculation; molarity does not depend on temperature for a fixed mass and volume, but the actual solubility of calcium phosphate does.
Why There Are Multiple “Calcium Phosphate” Formulas
Calcium phosphate is not a single compound. The term covers several salts that differ in the ratio of calcium to phosphate and in the degree of protonation. The most common forms are:
- Tricalcium phosphate – Ca3(PO4)2. This is the neutral salt, often used as an anti-caking agent and in bone graft substitutes.
- Dicalcium phosphate – CaHPO4. Contains one hydrogen phosphate ion; used in toothpaste and as a dietary supplement.
- Monocalcium phosphate – Ca(H2PO4)2. Contains two dihydrogen phosphate ions; used in baking powder.
- Hydroxyapatite – Ca5(PO4)3(OH). The main mineral in bones and teeth.
When someone says “calcium phosphate” without specifying, they usually mean tricalcium phosphate, Ca3(PO4)2. However, in biological and food contexts, you may encounter other forms. Always check the exact name or chemical formula on the label.
How to Read the Result
The molarity value tells you how many moles of calcium phosphate are present per liter of solution. For example, a 1.0 M solution of Ca3(PO4)2 contains 1.0 mole of the compound per liter, which equals 3.0 moles of Ca2+ ions and 2.0 moles of PO43− ions if fully dissociated. However, calcium phosphate is poorly soluble in water (about 0.002 g per 100 mL at 25 °C), so a 1 M solution is not physically possible under normal conditions. The calculator is useful for theoretical calculations or for preparing saturated solutions, but in practice you would work with much lower concentrations (millimolar or micromolar).
Common Mistakes
- Confusing the formula: Writing CaPO4 or Ca2(PO4)3 is wrong. The correct neutral formula is Ca3(PO4)2 because the charges must balance: 3 × (+2) = +6 and 2 × (−3) = −6.
- Using the wrong molar mass: If you use the molar mass of dicalcium phosphate (136.06 g/mol) instead of tricalcium phosphate (310.18 g/mol), your result will be off by a factor of more than 2.
- Volume in mL instead of L: The formula requires liters. If you enter 250 mL, you must divide by 1000 to get 0.25 L. The calculator does this conversion for you if you use the mL input, but in manual calculations it is a common source of error.
- Assuming complete dissolution: Calcium phosphate is nearly insoluble in water. If you try to make a 1 M solution, you will see undissolved solid. The molarity calculation assumes that the entire mass dissolves, which may not be true for this compound.
Safety and Handling
Calcium phosphate is generally considered non-toxic and is used in food and supplements. However, when handling any chemical powder, avoid inhaling dust and wear gloves and safety glasses. If you are preparing a solution in a laboratory, follow your lab method, the safety data sheet (SDS) and your supervisor. Do not ingest or apply to skin unless it is a food-grade product intended for consumption. For laboratory use, always label containers and store in a dry place.
Frequently Asked Questions
What is the molar mass of calcium phosphate?
The molar mass of tricalcium phosphate, Ca3(PO4)2, is 310.18 g/mol. This is calculated from the atomic weights: calcium 40.078 × 3 = 120.234, phosphorus 30.974 × 2 = 61.948, and oxygen 15.999 × 8 = 127.992, giving a total of 310.18 g/mol.
Is calcium phosphate soluble in water?
Very slightly. The solubility of tricalcium phosphate in water is about 0.002 g per 100 mL at 25 °C, which corresponds to roughly 0.06 mM. It is more soluble in acidic conditions, which is why it dissolves in the stomach and is used as a calcium supplement.
What is the difference between calcium phosphate and calcium phosphide?
Calcium phosphate (Ca3(PO4)2) contains phosphate ions (PO43−) and is a stable, safe compound. Calcium phosphide (Ca3P2) contains phosphide ions (P3−) and reacts with water to produce phosphine gas, which is toxic and flammable. They are completely different substances.
Why is calcium phosphate used in bone grafts?
Tricalcium phosphate and hydroxyapatite are biocompatible and osteoconductive, meaning they provide a scaffold that encourages bone cells to grow. They slowly dissolve in the body, releasing calcium and phosphate ions that are used to form new bone tissue.
Can I use this calculator for other calcium phosphate salts?
Yes, but you must change the molar mass to match the specific salt (e.g., dicalcium phosphate = 136.06 g/mol, monocalcium phosphate = 234.05 g/mol). The formula for molarity remains the same.
Related
Formula used
in m | Mass of Ca3(PO4)2 | g | 310.18 | 0 in mm | Molar mass | g/mol | 310.18 | 0.001 in v | Volume of solution | L | 1 | 0.001 out c | Molarity | mol/L | m / mm / v | 4 out cmm | Concentration in millimolar | mM | c * 1000 | 2
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Within 10 Percent Calculator – How to Use It5.00 %
- W/W Percentage Calculator: Formula & Examples2.92 %
- Percent Equation: Formula & How to Use It
- Percent of a Number Calculator: Find It Instantly20.00 %
- UWW GPA Calculator: How to Compute Your GPA
- PPM to w/w Calculator: Convert Easily5.0000 %