molecalculator

Moles & Molar Mass

Nitric Acid Formula: HNO₃ and Its Molar Mass

Calculator No. 01-3587 · Updated · Formula and assumptions shown below

Molar mass 63.012 g/mol
Mass for the entered amount
63.012 g
= Amount of nitric acid × Molar mass
Hydrogen atoms per molecule
1
Set in the form below
Nitrogen atoms per molecule
1
Set in the form below
You enter
Hydrogen atoms per molecule, Nitrogen atoms per molecule, Oxygen atoms per molecule, Amount of nitric acid (mol)
You get
Molar mass (g/mol), Mass for the entered amount (g)
Rounding
3 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

The chemical formula of nitric acid is HNO₃: each molecule contains one hydrogen atom, one nitrogen atom, and three oxygen atoms. This calculator works out the molar mass from the atom counts you enter and gives the mass of a chosen amount of nitric acid in grams.

Formula

The formula is HNO₃. Its subscripts mean that a molecule has one H atom, one N atom, and three O atoms; a missing subscript means one. The molar mass is the sum of each element’s atomic weight multiplied by its atom count:

M = (h × 1.008) + (n × 14.007) + (o × 15.999)

  • M is molar mass in grams per mole (g/mol).
  • h, n, and o are the respective numbers of hydrogen, nitrogen, and oxygen atoms per molecule; these are counts, without units.
  • 1.008, 14.007, and 15.999 are the IUPAC abridged standard atomic weights for hydrogen, nitrogen, and oxygen, expressed in g/mol.

For an amount in moles, mass is m = a × M, where m is mass in grams and a is amount in moles. The calculator treats the entered atom counts as fixed formula subscripts and uses the same molar mass convention in both outputs.

Worked Example

Using the calculator’s default values—h = 1, n = 1, o = 3, and a = 1 mol—first calculate the molar mass:

M = (1 × 1.008) + (1 × 14.007) + (3 × 15.999)
M = 1.008 + 14.007 + 47.997 = 63.012 g/mol

Then find the mass for 1 mol:

m = 1 mol × 63.012 g/mol = 63.012 g

Thus, the calculator returns a nitric acid molar mass of 63.012 g/mol and a mass of 63.012 g for the default amount.

Assumptions

  • The formula represents a neutral molecule of pure HNO₃, not an aqueous solution or a nitrate salt.
  • Atomic weights use the stated IUPAC abridged standard values; small differences can occur with other atomic-weight conventions.
  • The mass calculation is a stoichiometric conversion from amount in moles; it does not account for solution concentration, purity, or water content.

What HNO₃ Tells You

A chemical formula records which elements are present and how many atoms of each appear in a molecule. In HNO₃, the “3” applies only to oxygen. It does not mean three hydrogen atoms or three nitrogen atoms. The formula can also be written as HONO₂ in structural contexts to make the hydrogen attached to oxygen more apparent, but HNO₃ is the standard molecular formula.

Nitric acid is a strong mineral acid and a powerful oxidizing agent. In water, it ionizes extensively, producing hydronium and nitrate ions. A simplified equation is:

HNO₃ + H₂O → H₃O⁺ + NO₃⁻

This equation describes its acid behavior in water; it does not change the formula of a molecule of nitric acid before ionization. The nitrate ion, NO₃⁻, is different from nitric acid because it has no hydrogen and carries a negative charge. Nitrate salts contain this ion paired with positively charged ions.

Molar Mass and What It Means

Molar mass connects a count of molecules, expressed in moles, to a measurable mass. One mole contains exactly 6.02214076 × 10²³ specified entities. For pure molecular HNO₃, the calculator’s atomic-weight convention gives 63.012 g per mole. This is a calculated molar mass, not the density or the mass of a particular commercial acid solution.

That distinction matters in practical chemistry. A bottle labeled with an acid concentration contains nitric acid in water, so a given volume does not contain the same mass of HNO₃ as an equal volume of pure material. To convert a solution volume into moles, you need its concentration and volume; if using a mass-based concentration, you may also need the solution’s density. The formula alone cannot supply those conditions.

Common Formula Mix-Ups

  • HNO₃ versus NO₃⁻: HNO₃ is nitric acid; NO₃⁻ is the nitrate ion. The hydrogen and charge distinguish them.
  • Nitric versus nitrous acid: Nitric acid is HNO₃. Nitrous acid is HNO₂, with two oxygen atoms rather than three.
  • Formula versus concentration: HNO₃ identifies the compound, not how concentrated a solution is. Concentration needs a separate value and unit.
  • Subscripts versus coefficients: The subscript 3 says there are three oxygen atoms in each molecule. A coefficient in a reaction equation counts whole molecules and multiplies every atom in the formula.

For instance, 2 HNO₃ means two molecules, containing two hydrogen atoms, two nitrogen atoms, and six oxygen atoms in total. It does not change the molecular formula or the molar mass of each mole of HNO₃.

Safety and Scope

Nitric acid is corrosive and can cause severe burns. Concentrated forms are also oxidizing and may react dangerously with incompatible materials. Its fumes can harm the respiratory tract. Formula and molar-mass calculations are educational arithmetic, not instructions for handling, preparing, or using the substance.

Do not infer a safe handling method from a molecular formula. Anyone working with nitric acid in an authorized laboratory should follow the applicable lab method, the safety data sheet (SDS), and their supervisor. Suitable facilities, training, and protective measures depend on the concentration and task. Do not mix nitric acid with other chemicals unless a reviewed procedure explicitly requires it.

Frequently Asked Questions

What is the chemical formula of nitric acid?
It is HNO₃, with one hydrogen, one nitrogen, and three oxygen atoms per molecule.

What is the molar mass of nitric acid?
Using H = 1.008, N = 14.007, and O = 15.999, the molar mass is 63.012 g/mol.

Is HNO₃ the same as nitrate?
No. HNO₃ is nitric acid, while NO₃⁻ is the nitrate ion. Nitrate has no hydrogen atom and has a −1 charge.

Is nitric acid a strong acid?
Yes. In water, nitric acid ionizes extensively, forming hydronium and nitrate ions. Its strength does not indicate the concentration of a particular solution.

Does HNO₃ tell me how concentrated the acid is?
No. HNO₃ gives the substance’s molecular composition. A solution’s concentration must be stated separately, for example in mol/L or as a mass fraction.

Related

Formula used
in h | Hydrogen atoms per molecule | - | 1 | 0
in n | Nitrogen atoms per molecule | - | 1 | 0
in o | Oxygen atoms per molecule | - | 3 | 0
in a | Amount of nitric acid | mol | 1 | 0
out mm | Molar mass | g/mol | h * 1.008 + n * 14.007 + o * 15.999 | 3
out m | Mass for the entered amount | g | a * mm | 3

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →