molecalculator

Moles & Molar Mass

Co Atomic Number and Electron Configuration

Calculator No. 01-9529 · Updated · Formula and assumptions shown below

The calculator on this page is switched off while it is checked. The formula is below, and the worked example shows how to do the sum by hand.

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

Cobalt (Co) has atomic number 27 and its electron configuration is [Ar] 3d7 4s2. This means a neutral cobalt atom has 27 protons and 27 electrons, arranged with 2 electrons in the first shell, 8 in the second, 15 in the third, and 2 in the fourth. The configuration is foundational to understanding cobalt’s chemistry, magnetism, and its role in alloys and biological systems.

Formula

The electron configuration is built by following the Aufbau principle, which states that electrons fill atomic orbitals in order of increasing energy. The order is given by the Madelung rule: orbitals are filled by increasing (n + l), and for equal (n + l), by increasing n. For cobalt (Z = 27), the filling order is:

1s → 2s → 2p → 3s → 3p → 4s → 3d

Each orbital type has a maximum capacity: s holds 2, p holds 6, d holds 10, and f holds 14 electrons. The full configuration for cobalt is:

1s2 2s2 2p6 3s2 3p6 3d7 4s2

Summing the superscripts: 2 + 2 + 6 + 2 + 6 + 7 + 2 = 27, confirming the atomic number. The noble gas shorthand uses argon (Z = 18) as the core: [Ar] 3d7 4s2.

Worked Example

Using the default atomic number Z = 27, we construct the configuration step by step.

  1. 1s2 (2 electrons, total 2)
  2. 2s2 (2, total 4)
  3. 2p6 (6, total 10)
  4. 3s2 (2, total 12)
  5. 3p6 (6, total 18)
  6. 4s2 (2, total 20)
  7. 3d7 (7, total 27)

Thus the full configuration is 1s2 2s2 2p6 3s2 3p6 3d7 4s2. The electrons per shell are: K shell (n=1) = 2, L shell (n=2) = 2 + 6 = 8, M shell (n=3) = 2 + 6 + 7 = 15, N shell (n=4) = 2. This matches the calculator output.

Assumptions

  • The configuration is for a neutral, ground-state cobalt atom.
  • The Aufbau principle and Madelung rule are followed exactly; exceptions exist for some transition metals (e.g., chromium and copper), but cobalt is not an exception.
  • The noble gas core is argon ([Ar]) with Z = 18.

Why the 4s Fills Before 3d

A common source of confusion is why the 4s orbital is written before 3d even though 3d has a lower principal quantum number. In the ground state, the 4s orbital has a lower energy than 3d for potassium and calcium, so it fills first. For cobalt, the 4s is still lower in energy than 3d, so it fills before the 3d. However, when cobalt forms ions, the 4s electrons are lost first because the 3d electrons are closer to the nucleus and more tightly bound. For example, Co2+ has the configuration [Ar] 3d7, and Co3+ is [Ar] 3d6.

How to Read the Configuration

The configuration tells you the electron distribution, which determines chemical behavior:

  • The 3d7 electrons are valence electrons (along with the 4s2), and they participate in bonding and magnetism.
  • Cobalt commonly exhibits oxidation states +2 and +3, because losing the two 4s electrons and one 3d electron (for +3) is energetically favorable.
  • The seven 3d electrons are unpaired in the high-spin case, giving cobalt strong magnetic properties. In fact, cobalt is one of only three naturally occurring ferromagnetic elements (with iron and nickel).

Common Mistakes and Misconceptions

  • Writing 3d9 4s1 instead of 3d7 4s2 – This would be the configuration for nickel (Z=28) if you mistakenly add an electron to 3d. Cobalt has exactly 7 electrons in 3d.
  • Forgetting the 4s before 3d in shorthand – Some write [Ar] 4s2 3d7, which is also correct (the order of writing can vary), but the most common convention is to list orbitals in order of increasing n, so [Ar] 3d7 4s2 is preferred.
  • Confusing atomic number with mass number – Atomic number is the number of protons (27 for cobalt), not the mass number (which is about 59 for the most common isotope, 59Co).

Why It Matters

Cobalt’s electron configuration explains its role in:

  • Permanent magnets – Alnico magnets and samarium-cobalt magnets rely on cobalt’s high magnetic anisotropy.
  • Catalysis – Cobalt compounds catalyze hydrodesulfurization in petroleum refining and are used in the Fischer-Tropsch process.
  • Vitamin B12 – The only vitamin containing a metal, B12 has a cobalt atom at its center, coordinated by a corrin ring. The +3 oxidation state is stabilized by the ligand environment.
  • Batteries – Lithium cobalt oxide (LiCoO2) is a common cathode material in lithium-ion batteries.

Frequently Asked Questions

What is the electron configuration of Co2+?

Co2+ is formed by removing two electrons from the neutral atom. The electrons are removed from the 4s orbital first (because it is higher in energy than 3d in the ion), so Co2+ has the configuration [Ar] 3d7. This is why Co2+ is a common ion in salts like cobalt(II) chloride.

Why is cobalt magnetic but not all transition metals?

Ferromagnetism requires unpaired electrons and a specific crystal structure where the magnetic moments align. Cobalt has 3 unpaired electrons in its 3d orbitals (in the high-spin configuration), and its hexagonal close-packed structure allows these moments to align parallel. Iron and nickel also have unpaired electrons and ferromagnetic properties, but elements like copper (with a filled 3d shell) do not.

Is cobalt a transition metal?

Yes, cobalt is a transition metal. It is in group 9, period 4 of the periodic table. Transition metals are defined by having an incomplete d subshell in their neutral or common oxidation states. Cobalt’s 3d subshell is not full (7 of 10 electrons), so it qualifies.

What is the difference between atomic number and atomic mass?

Atomic number (Z) is the number of protons in the nucleus, which defines the element. For cobalt, Z = 27. Atomic mass (or atomic weight) is the average mass of an atom of the element, taking into account all isotopes. Cobalt’s standard atomic weight is 58.933 u, mostly due to 59Co, which has 27 protons and 32 neutrons.

Does cobalt have any exceptions to the Aufbau principle?

No, cobalt does not have an exception. Exceptions to the Aufbau principle occur in chromium (Z=24) and copper (Z=29), where a half-filled or fully filled d subshell is more stable than the predicted configuration. Cobalt’s 3d7 configuration is the expected one.

Related

Formula used
in z | Atomic number (Z) | - | 27 | 1
out ec | Electron configuration (full) | - | 1s2 2s2 2p6 3s2 3p6 3d7 4s2 | 0
out ecn | Electron configuration (noble gas) | - | [Ar] 3d7 4s2 | 0
out shell | Electrons per shell | - | 2, 8, 15, 2 | 0

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →