molecalculator

Moles & Molar Mass

Coffee Cup Calorimeter Equation and Example

Calculator No. 01-2730 · Updated · Formula and assumptions shown below

Reaction heat -2,510.40 J
Heat absorbed by solution
2,510.40 J
Result, rounded to 2 decimal places
Mass of solution
100 g
Set in the form below
Specific heat capacity
4.184 J/(g·°C)
Set in the form below
You enter
Mass of solution (g), Specific heat capacity (J/(g·°C)), Initial temperature (°C), Final temperature (°C)
You get
Reaction heat (J), Heat absorbed by solution (J)
Rounding
2 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

The coffee cup calorimeter equation is qrxn = −qsolution, with qsolution = m c ΔT. Enter the solution mass, its specific heat capacity, and the temperature change to calculate the heat absorbed by the solution; the reaction heat has the opposite sign. This calculator assumes the cup absorbs negligible heat.

Formula

First calculate the heat transferred to or from the solution:

qsolution = m c ΔT = m c (Tf − Ti)

For a reaction in an ideally insulated coffee cup, energy conservation gives:

qrxn = −qsolution = −m c (Tf − Ti)

  • qrxn is the reaction heat, in joules (J).
  • qsolution is the heat gained or lost by the solution, in J.
  • m is the solution mass, in grams (g).
  • c is the solution’s specific heat capacity, in joules per gram per degree Celsius, J/(g·°C).
  • ΔT is the temperature change, final minus initial, in °C. A temperature difference of 1 °C has the same size as 1 K.
  • Ti and Tf are the initial and final temperatures, respectively, in °C.

The minus sign is essential: if the solution warms, it gains heat and the reaction loses an equal amount in the ideal model. If the solution cools, the reaction heat is positive, meaning the reaction absorbs heat.

Worked Example

Using the calculator’s default values, the solution has a mass of 100 g and specific heat capacity of 4.184 J/(g·°C). Its temperature rises from 22 °C to 28 °C.

  1. Find the temperature change: ΔT = 28 °C − 22 °C = 6 °C.
  2. Calculate heat absorbed by the solution: qsolution = (100 g)(4.184 J/(g·°C))(6 °C) = 2510.4 J.
  3. Reverse the sign for the reaction: qrxn = −2510.4 J, or −2510.40 J to two decimal places.

The negative reaction heat indicates an exothermic process under this sign convention: heat flowed from the reaction into the solution. The displayed calculator result is −2510.40 J.

Assumptions

  • The cup is treated as perfectly insulating, and its own heat capacity is ignored.
  • The measured mass is the total solution mass, not just the solvent mass.
  • The solution is treated as having a uniform temperature and a constant specific heat capacity over the temperature interval.
  • No significant heat escapes to the air, thermometer, stirrer, or other surroundings.

How a Coffee Cup Calorimeter Works

A coffee cup calorimeter is a simple constant-pressure calorimeter, often made from an insulated cup with a lid and a temperature probe. Reactants are mixed in the cup, and the temperature change of the surrounding solution is measured. Because the cup is open to atmospheric pressure in the usual setup, the heat measured at constant pressure is related to the reaction’s enthalpy change, provided the system is sufficiently well insulated and other energy transfers are negligible.

The cup does not measure reaction heat directly. It measures a temperature change; mass and heat capacity convert that change into heat transferred to the solution. The energy balance then assigns the opposite heat to the reaction. The calculator gives total heat for the stated sample. To report a molar enthalpy change, divide qrxn by the amount of reacting substance in moles, using a clearly specified limiting reactant and sign convention.

Choosing Values and Reading the Result

Use the mass of the solution after mixing when it can be determined. If only the mass of water is known, treating it as the solution mass is an approximation; dissolved reactants add mass, and concentrated solutions can differ noticeably from water in heat capacity. For a dilute aqueous solution, a common classroom approximation is c = 4.184 J/(g·°C), the approximate specific heat capacity of liquid water near room temperature. It is not a universal value for every solution or temperature.

  • Record the temperature immediately before mixing as Ti, and the highest or lowest relevant temperature after mixing as Tf, according to the experiment’s measurement method.
  • Keep units consistent: grams with J/(g·°C) produces joules. If using kilograms, convert the heat capacity to J/(kg·°C) rather than mixing units.
  • Use final minus initial for ΔT. Do not enter the magnitude alone, because the direction of temperature change determines the sign.
  • For heat in kilojoules, divide the result in joules by 1000. Preserve extra digits during intermediate calculations and round only at the end.

Common Limitations and Errors

The most common sign mistake is reporting a positive reaction heat when the solution warmed. In this convention, a rise in solution temperature makes qsolution positive and qrxn negative. A negative qrxn is exothermic; a positive qrxn is endothermic.

Real cups are not perfectly insulated. Heat can escape to the room or be absorbed by the cup, lid, probe, and stirrer. If the cup’s heat capacity is known, include its contribution as qcup = CcupΔT, where Ccup is in J/°C, and use qrxn = −(qsolution + qcup). If it is not included, the simple equation may underestimate the magnitude of the reaction heat, particularly for a small sample or a large temperature change.

Other sources of error include incomplete mixing, delayed temperature readings, evaporation, splashing, and assuming water’s heat capacity for a solution whose composition differs substantially from water. The temperature probe should be read consistently, and the same experimental method should be used for comparable trials. A calorimeter constant determined for the cup assembly can improve the energy balance, but it does not correct every source of heat loss.

Coffee Cup Versus Bomb Calorimetry

A coffee cup calorimeter operates at approximately constant atmospheric pressure and is commonly used to estimate reaction heat or enthalpy change in solution. A bomb calorimeter is a sealed, rigid vessel operated at constant volume, commonly used for combustion measurements. In a bomb calorimeter, the calorimeter’s calibrated heat capacity is central to the calculation, and the measured heat is associated with a constant-volume process. The two setups therefore do not use interchangeable assumptions or interpret their heat results in exactly the same way.

Frequently Asked Questions

What is the equation for a coffee cup calorimeter?
Use qsolution = mcΔT and, for an ideal insulated cup, qrxn = −qsolution. Here ΔT means final temperature minus initial temperature.

Why is reaction heat the negative of solution heat?
Energy is conserved. In the simplified model, heat leaving the reaction enters the solution, and heat entering the reaction leaves the solution, so the quantities have equal magnitudes and opposite signs.

Is a coffee cup calorimeter at constant pressure?
In its usual open-to-the-atmosphere arrangement, it is treated as a constant-pressure calorimeter. That makes the heat measured relevant to enthalpy change when the experiment’s assumptions are adequately met.

Should I use the mass of water or the mass of solution?
Use the total solution mass when available. Using only the water mass is an approximation and can be less accurate when the amount of dissolved material is significant.

What does a negative qrxn mean?
It means the reaction released heat under the convention used here. If the measured solution temperature rises, qsolution is positive and qrxn is negative.

Can this equation give an exact reaction enthalpy?
Not by itself. Heat exchange with the cup and surroundings, measurement uncertainty, and approximations for mass and specific heat can affect the result. It provides an estimate unless those effects are measured and accounted for.

Related

Formula used
in m | Mass of solution | g | 100 | 0
in c | Specific heat capacity | J/(g·°C) | 4.184 | 0
in ti | Initial temperature | °C | 22 | -273.15
in tf | Final temperature | °C | 28 | -273.15
out q | Reaction heat | J | -m * c * (tf - ti) | 2
out qs | Heat absorbed by solution | J | m * c * (tf - ti) | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →