The complete electron configuration for potassium (K) is 1s2 2s2 2p6 3s2 3p6 4s1. This means potassium has 19 electrons arranged in shells around the nucleus, with a single valence electron in the 4s orbital. This configuration explains potassium’s high reactivity and its placement in Group 1 of the periodic table.
How to Read the Configuration
Electron configurations describe the distribution of electrons among atomic orbitals. Each part of the notation gives three pieces of information: the principal energy level (the number), the subshell type (s, p, d, or f), and the number of electrons in that subshell (the superscript). For potassium, the configuration shows electrons filling in the order: 1s, 2s, 2p, 3s, 3p, and then 4s.
The superscripts add up to the atomic number: 2 + 2 + 6 + 2 + 6 + 1 = 19. The 4s subshell holds the single valence electron, which is the electron involved in chemical bonding. This electron is relatively loosely held, which is why potassium readily loses it to form a K+ ion with a stable, noble-gas-like configuration (1s2 2s2 2p6 3s2 3p6).
Why the 4s Subshell Fills Before 3d
A common point of confusion is why potassium’s last electron goes into 4s rather than 3d. The simple answer is that the 4s orbital is lower in energy than the 3d orbital for potassium and calcium. This is due to the penetration effect: the 4s electron has a higher probability of being near the nucleus, which shields the 3d orbitals from the nuclear charge. The Aufbau principle—which states that electrons fill orbitals in order of increasing energy—dictates that 4s fills before 3d.
This ordering is confirmed by experimental ionization energies and spectral data. After potassium and calcium, the 3d orbitals become lower in energy than 4s, which is why transition metals like scandium (Z=21) have configurations that start filling 3d. For potassium, however, the configuration is definitively 1s2 2s2 2p6 3s2 3p6 4s1, not 1s2 2s2 2p6 3s2 3p6 3d1.
Orbital Diagram and Electron Spin
An orbital diagram represents each orbital as a box and each electron as an arrow. For potassium, the orbital diagram shows:
- 1s: two electrons with opposite spins (↑↓)
- 2s: two electrons with opposite spins (↑↓)
- 2p: six electrons filling all three p orbitals (↑↓ each)
- 3s: two electrons (↑↓)
- 3p: six electrons (↑↓ each)
- 4s: one electron (↑)
The single 4s electron has a spin quantum number of +½ or -½ (by convention, we draw it as up). This unpaired electron is what makes potassium paramagnetic and highly reactive. The pairing of electrons in filled orbitals follows Hund’s rule, which states that electrons will occupy degenerate orbitals singly before pairing up.
Noble Gas Shorthand (Abbreviated Configuration)
To save space, chemists often use the noble gas shorthand. For potassium, this is [Ar] 4s1, where [Ar] represents the electron configuration of argon (1s2 2s2 2p6 3s2 3p6). This notation is useful because the core electrons (those in [Ar]) are not involved in chemical bonding; only the valence electron in 4s matters for reactivity.
When writing the shorthand, always use the noble gas that comes immediately before the element in the periodic table. For potassium (Z=19), that is argon (Z=18). The shorthand [Ar] 4s1 is universally accepted and is what you will see in most textbooks and databases.
Common Mistakes and Misconceptions
One frequent error is writing 3d1 instead of 4s1 for the last electron. As explained above, 4s is lower in energy for potassium, so this is incorrect. Another mistake is misordering the 3p and 4s subshells; the correct order is 3p before 4s, not the reverse. A third error is miscounting electrons: potassium has 19, so the superscripts must sum to 19.
Some students also wonder if the configuration can be written as 1s2 2s2 2p6 3s2 3p6 4s1 or if it should be 1s2 2s2 2p6 3s2 3p6 4s1—they are the same. The order of subshells in the notation is always by increasing principal quantum number, then by subshell type (s, p, d, f).
Relationship to Periodic Table and Chemical Properties
Potassium’s electron configuration explains its position in the periodic table: it is in period 4 (because the highest principal quantum number is 4) and group 1 (because it has one valence electron). The single valence electron is easily lost, giving potassium a +1 oxidation state in virtually all its compounds. This is why potassium reacts vigorously with water to produce potassium hydroxide and hydrogen gas, and why it must be stored under oil to prevent reaction with moisture and oxygen.
The configuration also explains the similarity between potassium and other alkali metals like lithium and sodium, which all have one valence electron in an s orbital. The ionization energy of potassium is relatively low (about 419 kJ/mol), which is consistent with the loss of the 4s electron. The ionic radius of K+ is larger than that of Na+ because the 4s electron is farther from the nucleus than the 3s electron.
Frequently Asked Questions
What is the electron configuration of K+?
When potassium loses its valence electron, it forms the K+ ion with configuration 1s2 2s2 2p6 3s2 3p6, which is identical to argon. This is a stable, noble-gas configuration with all orbitals completely filled.
Why is potassium’s configuration not 1s2 2s2 2p6 3s2 3p6 3d1?
Because the 4s orbital is lower in energy than 3d for potassium. This is a consequence of the penetration effect and is confirmed by both theoretical calculations and experimental measurements. The Aufbau principle dictates that electrons fill the lowest-energy orbitals first.
How many valence electrons does potassium have?
Potassium has one valence electron, located in the 4s orbital. This single electron is responsible for its chemical reactivity and its +1 oxidation state.
What does the superscript in 4s1 mean?
The superscript indicates the number of electrons in that subshell. So 4s1 means there is exactly one electron in the 4s subshell. The sum of all superscripts equals the total number of electrons (19 for neutral potassium).
Is the electron configuration of potassium an exception to the Aufbau principle?
No, potassium follows the Aufbau principle normally. The principle states that electrons fill orbitals in order of increasing energy, and for potassium, 4s is lower than 3d, so 4s fills first. Exceptions occur in some transition metals and lanthanides where the energies are very close, but potassium is not an exception.
Assumptions
The electron configuration given assumes a neutral, ground-state potassium atom. In excited states, electrons can be promoted to higher orbitals (e.g., 4p or 3d), but the ground state is the most stable and the one we describe. The configuration also assumes the Aufbau principle and Hund’s rule apply, which they do for potassium. No relativistic effects are significant for this light element.
Related
Formula used
in z | Atomic number (Z) | - | 19 | 1 | 118 out ec | Electron configuration | - | config(z) | 0
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- ug to ppb Calculator: Convert Micrograms per Liter1.00 ppb
- Grams to Moles Chemistry: How to Convert0.2000 mol/L
- Convert ug/l to ppb Calculator
- CPP Calculator Ontario: How CPP Is Calculated162.12 $/month
- Grams to Moles to Molecules: How to Convert0.2000 mol/L
- Organic Chemistry Reaction Calculator: How It Works