The enthalpy equation, most simply written as ΔH = ΔU + PΔV, defines the change in heat content of a system at constant pressure. You enter the change in internal energy (ΔU) and the pressure–volume work term (PΔV), and the calculator returns the enthalpy change (ΔH) in joules or kilojoules, which tells you whether a process absorbs or releases heat.
Formula
At constant pressure, the enthalpy change is the sum of the change in internal energy and the work done by pressure–volume changes:
ΔH = ΔU + PΔV
- ΔH – enthalpy change (J or kJ). Positive means endothermic (heat absorbed); negative means exothermic (heat released).
- ΔU – change in internal energy (J). This includes kinetic and potential energy of molecules.
- P – pressure (Pa or atm).
- ΔV – change in volume (m³ or L). At constant pressure, PΔV is the work done by the system on the surroundings (or vice versa).
For a chemical reaction at constant pressure, ΔH is also the heat absorbed or released, often written as ΔHrxn. For phase changes, ΔH is the latent heat (e.g., enthalpy of fusion or vaporization).
Worked Example
Using the default values from the calculator: ΔU = 1500 J and PΔV = 500 J.
- Write the equation: ΔH = ΔU + PΔV
- Substitute: ΔH = 1500 J + 500 J
- Add: ΔH = 2000 J
- Convert to kJ: 2000 J ÷ 1000 = 2.000 kJ
The calculator shows ΔH = 2000.00 J (or 2.000 kJ). The positive sign indicates an endothermic process—the system gains heat.
Assumptions
- Constant pressure (isobaric conditions).
- Only pressure–volume work is considered; no electrical, magnetic, or other work.
- Ideal gas behavior if gases are involved (for PΔV calculations).
- No phase changes unless specified.
When to Use the Enthalpy Equation
You use ΔH = ΔU + PΔV when you need to connect internal energy to heat flow at constant pressure. In practice, most chemistry happens in open flasks at atmospheric pressure, so enthalpy is more relevant than internal energy. This equation is the foundation for:
- Calculating heat of reaction from bomb calorimetry (where ΔU is measured, then converted to ΔH).
- Understanding why ΔH ≈ ΔU for reactions with no gas volume change.
- Computing enthalpy changes for phase transitions (e.g., melting ice).
- Relating heat capacity at constant pressure (Cp) to internal energy.
How to Read the Result
The sign of ΔH tells you the direction of heat flow:
- Positive ΔH – endothermic; the system absorbs heat from surroundings (e.g., melting ice, evaporating water).
- Negative ΔH – exothermic; the system releases heat (e.g., combustion, condensation).
The magnitude tells you the amount of heat exchanged per mole or per process. For example, the enthalpy of vaporization of water is about 40.7 kJ/mol at 100°C—that’s the heat needed to turn one mole of liquid water into vapor at constant pressure.
Common Mistakes and Misconceptions
- Forgetting the pressure–volume term: For reactions with gases, PΔV can be significant. For example, at 25°C, 1 mole of gas occupies 24.5 L, so PΔV ≈ 2.5 kJ—not negligible.
- Using ΔH = ΔU for all processes: This only holds when ΔV = 0 (e.g., reactions with no gas change, or in a rigid container).
- Unit mix-ups: P in atm and V in L gives work in L·atm; convert to J using 1 L·atm = 101.325 J.
- Sign errors: Work done by the system on the surroundings is positive in the equation as written; if you use a different sign convention, results flip.
Limits of the Equation
ΔH = ΔU + PΔV assumes constant pressure and only PV work. It fails when:
- Pressure changes significantly (use ΔH = ΔU + Δ(PV) instead).
- Other work forms (electrical, surface) are involved.
- Reactions occur in solution with volume changes that are hard to measure (but often negligible).
For real gases, PΔV deviates from ideal behavior; use compressibility factors if high accuracy is needed.
Frequently Asked Questions
What is the difference between ΔH and ΔU?
ΔU is the change in internal energy (all molecular kinetic and potential energy). ΔH adds the work done by volume change at constant pressure. For reactions with no gas volume change, they are nearly equal; for gas reactions, they differ by PΔV.
How do I convert L·atm to joules?
Multiply by 101.325. For example, 2 L·atm × 101.325 = 202.65 J. This conversion comes from the definition of the atmosphere and the liter.
Is enthalpy the same as heat?
At constant pressure, yes—ΔH equals the heat absorbed or released. But enthalpy is a state function, while heat is a path function. Under constant pressure, the path simplifies to heat.
Why is ΔH often used in chemistry instead of ΔU?
Because most reactions run in open containers at constant atmospheric pressure. Measuring heat at constant pressure gives ΔH directly, which is more practical than constant-volume conditions.
Can ΔH be zero?
Yes, for an ideal gas undergoing an isothermal process (constant temperature), ΔU = 0 and if volume doesn’t change, ΔH = 0. But for real processes, ΔH is rarely exactly zero.
Does ΔH depend on temperature?
Yes, enthalpy changes with temperature because heat capacity changes. The equation ΔH = ΔU + PΔV holds at a given temperature; to adjust to another temperature, use Kirchhoff’s law with heat capacities.