Convert a temperature in degrees Celsius (°C) to kelvin (K) by adding 273.15: K = °C + 273.15. Enter a Celsius temperature in the calculator to get the equivalent temperature in kelvin, the SI unit of thermodynamic temperature.
Formula
The conversion formula is T(K) = t(°C) + 273.15. Here, t is the temperature in degrees Celsius and T is the same temperature in kelvin. The offset, 273.15, is exact: the Celsius and kelvin scales have equal-sized degrees but different zero points. The calculator accepts Celsius values at or above −273.15 °C, the theoretical lower limit known as absolute zero.
Worked Example
Using the default input, 25 °C:
- Start with the Celsius temperature: t = 25 °C.
- Add the conversion offset: T = 25 + 273.15 = 298.15 K.
- At the calculator’s two-decimal display precision, the result is 298.15 K.
Assumptions
- The input is a temperature expressed in degrees Celsius, not a temperature difference mislabeled as a temperature.
- The standard Celsius-to-kelvin relationship is used; the offset is 273.15 exactly.
- The displayed result is rounded to two decimal places. Extra displayed precision does not imply that the original measurement was equally precise.
How the Celsius and Kelvin Scales Relate
Celsius and kelvin use the same interval size. A change of 1 °C is equal in magnitude to a change of 1 K. Their difference is the location of zero: 0 °C is the freezing point of water under standard pressure conditions, while 0 K is absolute zero. Therefore conversion requires adding or subtracting a fixed offset, not multiplying by a scale factor.
The kelvin is the SI base unit for thermodynamic temperature. Its symbol is K, without a degree sign. Write 298.15 K, not “298.15 degrees Kelvin.” Celsius is written with the degree sign: 25 °C.
Absolute zero is −273.15 °C, equivalent to 0 K. Temperatures below that value are not possible in the ordinary thermodynamic temperature scale used by this calculator, so its input limit prevents them. This lower limit is a physical boundary, not a convenient rounding rule.
When to Convert Celsius to Kelvin
Use kelvin when a scientific equation requires absolute temperature. Many formulas depend on temperature measured from absolute zero, rather than from the Celsius scale’s chosen zero point. For example, the ideal gas law, PV = nRT, uses absolute temperature when R is expressed in compatible units. Substituting a Celsius number directly into such an equation generally gives an invalid result.
Kelvin is also common in thermodynamics, spectroscopy, materials science, and calculations involving thermal energy. In ordinary weather reports, cooking references, and many everyday descriptions, Celsius is often easier to interpret. The best unit depends on the context and, for equations, the units required by the formula.
- Room temperature: 20 °C = 293.15 K.
- Water’s freezing point: 0 °C = 273.15 K.
- Water’s boiling point: 100 °C = 373.15 K at standard atmospheric pressure.
- A cold environment: −40 °C = 233.15 K.
The boiling point example is pressure-dependent: water does not boil at exactly 100 °C under every condition. That qualification concerns the physical state of water, not the mathematical temperature conversion.
Common Conversion Mistakes
- Subtracting instead of adding: Celsius-to-kelvin conversion adds 273.15. Subtract 273.15 only when converting kelvin to Celsius.
- Using 273 instead of 273.15: 273 is a rough approximation. It can be adequate for a quick estimate, but not when a more precise conversion is needed.
- Multiplying by 9/5: That factor belongs to conversions involving Fahrenheit, not Celsius and kelvin.
- Writing °K: Kelvin values have no degree symbol. Use K.
- Confusing a temperature with a temperature change: For an interval, a change of 10 °C has the same size as a change of 10 K. You do not add 273.15 to a temperature difference.
Rounding should also match the precision of the measurement. The calculator reports two decimal places as a consistent numerical display, but if a thermometer reading is only known to the nearest degree, writing many decimal places may imply unjustified measurement accuracy. The conversion itself is exact; the input measurement may not be.
Converting Back and Comparing Other Scales
To convert kelvin back to Celsius, subtract 273.15: t(°C) = T(K) − 273.15. For example, 310.15 K − 273.15 = 37 °C. The forward and reverse formulas are inverses, so applying one after the other returns the starting temperature, apart from any rounding in the displayed value.
Fahrenheit has a different interval size as well as a different zero point. To convert Celsius to Fahrenheit, use °F = (°C × 9/5) + 32. For instance, 25 °C is 77 °F, while the same temperature is 298.15 K. Avoid using a Celsius-to-kelvin offset in a Fahrenheit calculation.
Frequently Asked Questions
What is the formula for converting C to K?
For a temperature in degrees Celsius, add 273.15: K = °C + 273.15. The result is a temperature in kelvin.
How many kelvin is 1 °C?
A temperature of 1 °C is 274.15 K. This differs from saying that a temperature change of 1 °C equals a change of 1 K; those two intervals are the same size.
Is 0 °C equal to 273 K?
More precisely, 0 °C equals 273.15 K. Using 273 K is an approximation that omits 0.15 K.
Can Celsius temperatures be negative in kelvin?
They can be negative in Celsius, but valid ordinary thermodynamic temperatures converted to kelvin cannot be below 0 K. For example, −20 °C is 253.15 K.
Do I write degrees before kelvin?
No. The correct symbol is K, without a degree sign. Celsius uses °C, while kelvin uses K.
Related
Formula used
in c | Temperature in Celsius | °C | 25 | -273.15 out k | Temperature in kelvin | K | c + 273.15 | 2
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- MD Calc I:T Ratio Calculator and Explanation0.0500 ratio
- Oxygen Mass Number: Isotope Values Explained16 nucleons
- Mass-to-Light Ratio: Meaning and Calculation1.000 M☉/L☉
- M/z Ratio in Mass Spectrometry: Meaning and Calculation1,000.00 Th
- Mass Fraction to Molar Fraction Calculator
- K2 Molar Mass Calculator and Calculation78.1966 g/mol