molecalculator

Moles & Molar Mass

Fahrenheit to Celsius and Kelvin Conversion

Calculator No. 01-8731 · Updated · Formula and assumptions shown below

Temperature in Celsius 37.00 °C
Temperature in Kelvin
310.15 K
= (Temperature in Fahrenheit − 32) × 5 ÷ 9 + 273.15
Temperature in Fahrenheit
98.6 °F
Set in the form below
You enter
Temperature in Fahrenheit (°F)
You get
Temperature in Celsius (°C), Temperature in Kelvin (K)
Rounding
2 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

To convert Fahrenheit to Celsius, subtract 32 and multiply by 5/9. To convert Fahrenheit to Kelvin, first convert to Celsius, then add 273.15. This page provides a calculator that does both conversions instantly, along with the formulas, worked examples, and practical context for when you need them.

Formula

The conversion between Fahrenheit (°F) and Celsius (°C) is defined by the linear relationship:

°C = (°F − 32) × 5/9

To get Kelvin (K), add 273.15 to the Celsius value:

K = (°F − 32) × 5/9 + 273.15

Where:

  • °F = temperature in degrees Fahrenheit
  • °C = temperature in degrees Celsius
  • K = temperature in kelvin (no degree symbol)

The factor 5/9 reflects that a change of 9 °F equals a change of 5 °C. The constant 32 aligns the freezing point of water: 32 °F = 0 °C. The constant 273.15 shifts from the Celsius scale to the absolute thermodynamic scale, where 0 K is absolute zero (−273.15 °C).

Worked Example

Convert 98.6 °F (normal human body temperature) to Celsius and Kelvin.

Step 1: Subtract 32
98.6 − 32 = 66.6

Step 2: Multiply by 5/9
66.6 × 5/9 = 37.0 °C

Step 3: Add 273.15
37.0 + 273.15 = 310.15 K

So 98.6 °F = 37.0 °C = 310.15 K. The calculator above gives the same result (37.00 °C and 310.15 K) when you enter 98.6.

Assumptions

  • The conversion uses the exact defined relationship between the Fahrenheit and Celsius scales.
  • Kelvin is an absolute temperature scale; 0 K is absolute zero, the lowest possible temperature.
  • No pressure or volume effects are involved—temperature scales are independent of substance.

Why There Are Three Temperature Scales

Fahrenheit, Celsius, and Kelvin exist because they serve different purposes. Fahrenheit is used mainly in the United States for everyday weather, cooking, and body temperature. Celsius is the standard in most of the world and in scientific work for everyday measurements. Kelvin is the SI base unit of thermodynamic temperature, used in physics, chemistry, and engineering because it starts at absolute zero and has no negative values.

The Fahrenheit scale was proposed by Daniel Gabriel Fahrenheit in 1724, using a brine solution as a low reference point and the human body as an upper reference. Celsius, introduced by Anders Celsius in 1742, is based on water’s freezing and boiling points at standard pressure. Kelvin, named after Lord Kelvin, was defined so that one kelvin equals one degree Celsius, but with its zero at absolute zero (−273.15 °C).

How to Do the Conversion Mentally

For quick estimates without a calculator, you can use these shortcuts:

  • Fahrenheit to Celsius: subtract 30, then divide by 2. For example, 80 °F → (80 − 30) / 2 = 25 °C (actual is 26.7 °C). This works best for temperatures between 0 and 100 °F.
  • Celsius to Fahrenheit: multiply by 2, then add 30. For example, 20 °C → (20 × 2) + 30 = 70 °F (actual is 68 °F).
  • Celsius to Kelvin: just add 273.15. No multiplication needed.

These approximations are fine for weather discussions but not for lab work or cooking, where exact values matter.

Common Mistakes and Misconceptions

One frequent error is forgetting to subtract 32 before multiplying. For example, converting 100 °F by just multiplying by 5/9 gives 55.6 °C instead of the correct 37.8 °C—a huge difference. Another mistake is mixing up the order: always subtract 32 first, then multiply.

A common misconception is that Kelvin uses degrees (°K). It does not—the unit is simply “kelvin” (symbol K). You write 300 K, not 300 °K. Another misconception is that 0 °F is the coldest possible temperature. Actually, absolute zero is −459.67 °F, so there are negative Fahrenheit temperatures.

Also, note that a change of 1 °C equals a change of 1 K, so when you convert a temperature difference (not an absolute temperature), you don’t add 273.15. For example, a 10 °C temperature rise is also a 10 K rise, but it is an 18 °F rise (10 × 9/5).

Practical Applications

Knowing these conversions is useful in many real situations:

  • Cooking: Oven temperatures in the US are often given in °F, but many international recipes use °C. A 350 °F oven is 176.7 °C, often rounded to 180 °C.
  • Weather: Travelers between the US and other countries need to convert forecasts. A comfortable 72 °F is about 22 °C.
  • Science labs: Most chemistry and physics experiments use Celsius or Kelvin. If a lab manual gives a temperature in °F, you must convert before using it in gas law calculations (where Kelvin is required).
  • Medical: Body temperature is measured in °F in the US (98.6 °F) but in °C elsewhere (37 °C). A fever might be 100.4 °F, which is 38 °C.
  • Industrial processes: Many manufacturing specifications use °C or K, so technicians often convert from °F instruments.

Why Kelvin Matters in Science

Kelvin is the only scale that is directly proportional to the average kinetic energy of particles. Doubling the Kelvin temperature doubles the average kinetic energy (at constant pressure). This makes Kelvin essential in gas laws such as the ideal gas law (PV = nRT), where T must be in kelvin. Using Celsius in that equation would give wrong results because 0 °C is not zero energy.

Absolute zero (0 K = −273.15 °C = −459.67 °F) is the point where particles have minimal thermal motion. While it cannot be reached in practice, scientists have come within fractions of a kelvin above it. The Kelvin scale is also used in color temperature for lighting and photography, where “warm” or “cool” light is described in kelvin.

Frequently Asked Questions

What is the formula to convert Fahrenheit to Celsius?
Subtract 32 from the Fahrenheit value, then multiply by 5/9. So °C = (°F − 32) × 5/9. For example, 212 °F → (212 − 32) × 5/9 = 100 °C.

How do I convert Fahrenheit to Kelvin directly?
Use the combined formula: K = (°F − 32) × 5/9 + 273.15. For instance, 32 °F → (32 − 32) × 5/9 + 273.15 = 273.15 K, which is the freezing point of water.

Is 100 °F the same as 37.8 °C?
Yes, 100 °F equals 37.8 °C. This is often mistaken for body temperature, but normal body temperature is 98.6 °F (37.0 °C). A temperature of 100 °F is a mild fever.

Why does the US still use Fahrenheit?
The US adopted Fahrenheit historically, and changing would be costly and disruptive. While most countries use Celsius, the US continues with Fahrenheit for everyday use, though science and medicine in the US use Celsius and Kelvin.

What is absolute zero in Fahrenheit?
Absolute zero is −459.67 °F. This is the lowest possible temperature, equivalent to 0 K and −273.15 °C.

Can I use Celsius instead of Kelvin in gas law calculations?
No. Gas law equations require absolute temperature in kelvin because they involve ratios of temperature. Using Celsius would produce incorrect results because the zero point is arbitrary. Always convert to kelvin before plugging into PV = nRT.

Related

Formula used
in f | Temperature in Fahrenheit | °F | 98.6 | -459.67 | 10000
out c | Temperature in Celsius | °C | (f - 32) * 5 / 9 | 2
out k | Temperature in Kelvin | K | (f - 32) * 5 / 9 + 273.15 | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →