molecalculator

Moles & Molar Mass

Convert Litres to Kilograms of Ethanol

Calculator No. 01-8899 · Updated · Formula and assumptions shown below

Mass of ethanol 0.789 kg
Volume of ethanol
1 L
Set in the form below
Density of ethanol
0.789 kg/L
Set in the form below
You enter
Volume of ethanol (L), Density of ethanol (kg/L)
You get
Mass of ethanol (kg)
Rounding
3 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

To convert litres to kilograms of ethanol, multiply the volume in litres by the density of ethanol at your temperature: at 20 °C, 1 litre of pure ethanol weighs 0.789 kg. This page gives you a calculator that does exactly that, plus the density values you need for other temperatures and mixtures.

Formula

The conversion is a direct application of the density definition:

m = V × ρ

  • m = mass of ethanol, in kilograms (kg)
  • V = volume of ethanol, in litres (L)
  • ρ (rho) = density of ethanol, in kilograms per litre (kg/L)

Density is the mass per unit volume. For pure ethanol at 20 °C, ρ = 0.789 kg/L. If you have 5 L, the mass is 5 × 0.789 = 3.945 kg. The calculator uses the density you enter, defaulting to the 20 °C value.

Worked Example

Using the default values from the calculator (1 L and 0.789 kg/L):

  1. Write the formula: m = V × ρ
  2. Substitute the numbers: m = 1 L × 0.789 kg/L
  3. Multiply: m = 0.789 kg

The calculator returns 0.789 kg. If you enter 10 L, you get 7.890 kg. The arithmetic is simple; the only real work is knowing the correct density.

Why Density Changes with Temperature

Ethanol expands when heated and contracts when cooled, so its density is temperature-dependent. The value 0.789 kg/L is valid at 20 °C, which is the standard reference temperature used in many lab tables. At 15 °C, the density is about 0.794 kg/L; at 25 °C it drops to about 0.785 kg/L. Over a typical room-temperature range (15–30 °C), the variation is roughly 1%, which matters if you are measuring fuel, making solutions, or doing precise stoichiometry.

For a quick rule of thumb, use 0.789 kg/L for most calculations near 20 °C. For exact work, look up the density at your actual temperature or measure it with a hydrometer.

How to Use the Calculator

Enter the volume of ethanol in litres. Then enter the density. The default is 0.789 kg/L for pure ethanol at 20 °C. If you are working with a different temperature or with an ethanol-water mixture, replace the density with the correct value. The calculator returns the mass in kilograms.

For example, to convert 25 L of ethanol at 20 °C:

  • Volume = 25 L
  • Density = 0.789 kg/L
  • Mass = 25 × 0.789 = 19.725 kg

The result is the mass of pure ethanol. If your sample is a mixture (e.g., 95% ethanol by volume), you must adjust the density or the volume accordingly—see below.

Common Mistakes and Misconceptions

The most frequent error is using the density of water (1 kg/L) instead of ethanol. Ethanol is lighter than water, so 1 L of ethanol weighs less than 1 kg. Another mistake is ignoring temperature: using 0.789 kg/L when the liquid is at 30 °C will overestimate the mass by about 0.5%.

A related misconception is that “litres” and “kilograms” are interchangeable for ethanol. They are not—litres measure volume, kilograms measure mass. The conversion only works through density. For water, 1 L ≈ 1 kg, but for ethanol it is about 0.789 kg.

Also, be careful with the difference between mass and weight. In everyday language, “weight” often means mass, but technically weight is a force. On Earth, 1 kg of mass weighs about 9.81 N. In this calculator, we use mass in kilograms, which is what you would read on a balance.

Ethanol-Water Mixtures

If you have a solution of ethanol and water (like denatured alcohol or a laboratory dilution), the density is not simply 0.789 kg/L. It depends on the concentration. For example, a 95% ethanol by volume solution (common in labs) has a density of about 0.805 kg/L at 20 °C. A 50% v/v solution has a density around 0.914 kg/L because water is denser.

To convert litres of a mixture to kilograms, you need the density of that specific mixture. You can find tables in chemistry handbooks or use a hydrometer. Alternatively, if you know the mass fraction, you can calculate the density from the component densities, but that is more complex because volumes are not additive (ethanol-water mixtures contract). For most practical purposes, look up the density of the exact mixture.

Practical Applications

Knowing how to convert litres to kilograms of ethanol is useful in several real-world situations:

  • Fuel blending: Ethanol is added to gasoline; mass-based calculations are needed for energy content and emissions.
  • Lab solution prep: When making a solution by mass, you may need to measure a certain mass of ethanol from a volume.
  • Shipping and storage: Transport regulations and tank capacities are often in litres, but weight limits are in kilograms.
  • Fermentation: In brewing or biofuel production, you might track ethanol yield by mass from a volume of liquid.

In every case, the conversion is the same: multiply volume by density.

Safety and Handling

Ethanol is a flammable liquid. When working with it, follow your lab method, the safety data sheet (SDS) and your supervisor. Keep it away from open flames and sparks, and use in a well-ventilated area. If you are measuring large volumes, use appropriate containers and grounding to avoid static discharge. This calculator is for study and planning arithmetic only; it does not replace safe handling procedures.

Frequently Asked Questions

How many kilograms is 1 litre of ethanol?

At 20 °C, 1 litre of pure ethanol has a mass of 0.789 kilograms. This is because the density of ethanol is 0.789 kg/L. If the temperature is different, the mass changes slightly: at 25 °C it is about 0.785 kg, and at 15 °C it is about 0.794 kg.

Why is ethanol lighter than water?

Ethanol molecules (C₂H₅OH) have a lower molecular mass (46.07 g/mol) than water (18.02 g/mol), but the key is how they pack. Ethanol molecules have a longer carbon chain that disrupts hydrogen bonding, so they are less densely packed than water molecules. As a result, the density of ethanol (0.789 g/mL) is lower than water’s 0.998 g/mL at 20 °C.

Can I use the same conversion for denatured alcohol?

Denatured alcohol is ethanol with additives (like methanol or bitrex) to make it undrinkable. The density is usually very close to pure ethanol, but not identical. Check the label or look up the density of the specific denatured alcohol you have. For most purposes, 0.789 kg/L is a good approximation, but for precise work, use the actual density.

How do I convert litres to grams of ethanol?

Multiply the volume in litres by the density in kg/L to get kilograms, then multiply by 1000 to get grams. For example, 2 L × 0.789 kg/L = 1.578 kg = 1578 g. Alternatively, use a density in g/mL: 1 L = 1000 mL, and 0.789 g/mL × 1000 mL = 789 g per litre.

Does the density of ethanol change with purity?

Yes. Pure ethanol (100%) has a density of 0.789 kg/L at 20 °C. If water is present, the density increases because water is denser. For example, 95% v/v ethanol has a density of about 0.805 kg/L, and 70% v/v ethanol is about 0.868 kg/L. Always use the density that matches your actual solution.

What is the density of ethanol in g/mL?

At 20 °C, the density of pure ethanol is 0.789 g/mL. This is the same as 0.789 kg/L because 1 g/mL = 1 kg/L. Many chemistry tables list density in g/mL, so you can use that value directly in the formula if you convert litres to millilitres.

Related

Formula used
in v | Volume of ethanol | L | 1 | 0
in d | Density of ethanol | kg/L | 0.789 | 0
out m | Mass of ethanol | kg | v * d | 3

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →