molecalculator

Moles & Molar Mass

T-Bill Rate Calculator: Current Yield & Price

Calculator No. 01-11962 · Updated · Formula and assumptions shown below

Investment rate (annualized yield) 6.108 %
Interest earned
15.00 USD
= Face value − Price paid
Face value
1000 USD
Set in the form below
Price paid
985 USD
Set in the form below
You enter
Face value (USD), Price paid (USD), Days to maturity (days)
You get
Investment rate (annualized yield) (%), Interest earned (USD)
Rounding
3 dp · 2 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

This T-bill rate calculator works out the annualized yield (investment rate) and selling price for a U.S. Treasury bill based on the face value, the price you pay (or the discount), and the days to maturity. You enter the face value, the discount rate or price, and the term in days, and the calculator returns the yield you would earn on an annualized basis plus the dollar amount of interest.

Formula

The investment rate (also called the bond equivalent yield) for a T-bill is calculated as:

Investment Rate = [(Face Value − Price Paid) / Price Paid] × (365 / Days to Maturity) × 100

Where:

  • Face Value (m) – the amount the U.S. Treasury pays you at maturity (typically $100, $1,000, $10,000, etc.) in USD.
  • Price Paid (p) – what you actually pay to buy the bill at auction or in the secondary market, in USD.
  • Days to Maturity (d) – the number of days from settlement to maturity. Standard T-bill terms are 4-week (28 days), 8-week (56 days), 13-week (91 days), 26-week (182 days), and 52-week (364 days).

The 365 in the formula assumes a 365-day year, which is the convention the U.S. Treasury uses for investment rates. The result is an annualized percentage, so you can compare T-bill yields to other interest-bearing investments.

Worked Example

Using the default values from the calculator above (face value = $1,000, price paid = $985, days = 91):

  1. Interest earned = $1,000 − $985 = $15
  2. Divide by price paid: $15 / $985 = 0.0152284
  3. Multiply by (365 / 91) = 4.010989
  4. 0.0152284 × 4.010989 = 0.061087
  5. Multiply by 100 to get a percentage: 6.109%

The calculator shows an investment rate of 6.109% (rounded to three decimals) and interest earned of $15.00. If you held a 91-day T-bill bought at $985, your annualized return would be about 6.11%.

Assumptions

  • The T-bill is held to maturity – no early sale in the secondary market.
  • The price paid is the actual cash you pay, not the “discount rate” quoted at auction (see below).
  • The year is assumed to have 365 days, matching the U.S. Treasury’s convention for investment rates.
  • No reinvestment of interest is considered; the yield is simple annualized, not compounded.

How T-Bill Rates Are Quoted

When you look up “current T-bill rate,” you will often see two numbers: the discount rate and the investment rate. The discount rate is the percentage of face value that is subtracted from the face value to get the price. For example, a 91-day bill with a discount rate of 5% would sell for $1,000 − ($1,000 × 0.05 × 91/360) = $987.36. The investment rate uses the price paid as the base and annualizes over 365 days, which gives a slightly higher number. The calculator above uses the investment rate because that is the yield you actually earn on your money.

The U.S. Treasury holds weekly auctions for 4-week, 8-week, 13-week, and 26-week bills, and monthly for 52-week bills. The auction determines the discount rate, from which the price and investment rate are derived. You can also buy T-bills on the secondary market through brokers, where the price fluctuates with market interest rates.

Why the Rate Changes

T-bill rates move with the Federal Reserve’s benchmark interest rate, inflation expectations, and overall demand for safe short-term assets. When the Fed raises rates, new T-bill auctions tend to offer higher yields. When investors are worried about the stock market, they buy T-bills, which can push prices up and yields down. Because T-bills are backed by the U.S. government, they are considered one of the safest investments, so their yields are often lower than corporate bonds or stocks.

To find the current rate, check the U.S. Treasury’s website (TreasuryDirect) or financial news sites that publish the latest auction results. The rate changes weekly for most bills, so the “current” rate is only valid for the most recent auction.

How to Use the Calculator for Real Auctions

If you want to estimate the yield before buying, you need to know the discount rate from the auction announcement. The Treasury publishes the expected auction date and the term. You can compute the price using the discount formula, then enter that price into this calculator to get the investment rate. Alternatively, if you already know the price you paid (from a broker confirmation), enter that directly.

  • At TreasuryDirect, you can place a non-competitive bid, which guarantees you receive the auction’s average discount rate. The price is then calculated automatically.
  • In the secondary market, the price is quoted per $100 of face value, such as $98.50. Multiply by the face value/100 to get the price paid.
  • Remember that the settlement date is usually one business day after the auction, and the days to maturity is counted from settlement.

Common Mistakes and Misconceptions

Mistake 1: Using the discount rate as the yield. The discount rate is not the same as the yield because it is based on face value and a 360-day year. The investment rate is always higher. For a 91-day bill, the difference is roughly 0.2–0.3 percentage points.

Mistake 2: Forgetting to annualize. If you earn $15 on a 91-day bill, that is a 1.5% return over 91 days. Many people mistakenly quote that as the annual rate. The calculator correctly annualizes to 6.11%.

Mistake 3: Mixing up days. Some sources use 360 days for discount rates, others use 365 for yields. Always check which convention is being used. This calculator uses 365 for the investment rate.

Misconception: T-bills are tax-free. T-bill interest is exempt from state and local taxes but is subject to federal income tax. The calculator does not account for taxes, so your after-tax return will be lower if you are in a significant federal tax bracket.

Comparing T-Bill Yields to Other Investments

Because T-bills are risk-free (in nominal terms), they are often used as the baseline for the “risk-free rate” in finance. To compare a T-bill yield to a savings account or a certificate of deposit (CD), look at the annual percentage yield (APY). A savings account APY is already annualized and compounds, while the T-bill investment rate is simple annualized. For short terms, the difference is small, but for longer terms, compounding matters. For example, a 6% T-bill held for 26 weeks earns 3% in six months; if you reinvest at the same rate, your effective annual yield would be about 6.09%, slightly higher than the simple 6%.

Also consider that T-bills are sold at a discount and pay no periodic interest, which can be advantageous for cash flow planning. You know exactly what you will receive at maturity.

Frequently Asked Questions

What is the current 3-month T-bill rate? The rate changes weekly. As of early 2025, the 13-week T-bill investment rate has been around 4.2% to 4.5%, but you must check the latest auction results on TreasuryDirect or financial news sites for the exact number.

How do I calculate the price of a T-bill from the discount rate? Use the formula: Price = Face Value × (1 − (Discount Rate × Days/360)). For a $1,000 bill, 5% discount, 91 days: 1000 × (1 − 0.05 × 91/360) = $987.36. Then use that price in this calculator to find the investment rate.

Is the T-bill rate the same as the Federal Reserve rate? No. The Fed rate is the target for overnight interbank lending. T-bill yields are influenced by the Fed rate but also by market demand and expectations. They can be higher or lower than the Fed rate.

Can I lose money on a T-bill if I hold to maturity? No, if you hold to maturity, you will receive the full face value. The only risk is if you sell before maturity, the price may be lower than what you paid if interest rates rose.

Do I need to pay state taxes on T-bill interest? No, T-bill interest is exempt from state and local income taxes. It is subject to federal income tax.

What is the minimum amount to buy a T-bill? The minimum is $100, and you can buy in increments of $100 through TreasuryDirect.

Limitations of the Calculator

This calculator assumes you know the price you paid. If you only know the discount rate, you must first convert it to a price. It also does not account for reinvestment, taxes, or the bid-ask spread if you buy on the secondary market. The result is an annualized simple yield, not an effective compound yield. For most comparisons, this is sufficient, but for precise portfolio calculations, consider using a more detailed financial model.

Always verify the current rate from official Treasury sources before making an investment decision. The calculator is a study and planning tool, not financial advice.

Related

Formula used
in m | Face value | USD | 1000 | 0
in p | Price paid | USD | 985 | 0
in d | Days to maturity | days | 91 | 1
out y | Investment rate (annualized yield) | % | ((m - p) / p) * (365 / d) * 100 | 3
out i | Interest earned | USD | m - p | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →