The density of benzene is 0.8765 g/mL at 20 °C (68 °F). This means one milliliter of liquid benzene weighs 0.8765 grams, making it lighter than water (which has a density of about 1.00 g/mL at the same temperature). This single value is the standard reference, but the actual density changes noticeably with temperature—a key detail for anyone measuring or handling benzene in a lab or industrial setting.
Formula
The density of a liquid is its mass divided by its volume: ρ = m / V, where ρ is density (g/mL), m is mass (g), and V is volume (mL). For benzene, the density at a given temperature can be approximated with a linear correction from the 20 °C reference value:
ρ(t) = ρ20 − 0.0011 × (t − 20)
where:
- ρ(t) = density at temperature t (g/mL)
- ρ20 = density at 20 °C, 0.8765 g/mL
- t = temperature in °C
- 0.0011 = average density change per °C (g/mL per °C) for benzene near room temperature
This linear approximation holds well between roughly 10 °C and 60 °C. For wider ranges, a more complex polynomial is needed, but for most lab work this simple correction is accurate to about 0.1%.
Worked Example
Using the calculator defaults: at 20 °C, the density is simply the reference value:
ρ(20) = 0.8765 − 0.0011 × (20 − 20) = 0.8765 g/mL
Now let’s calculate the density at 35 °C, a common summer lab temperature:
ρ(35) = 0.8765 − 0.0011 × (35 − 20) = 0.8765 − 0.0011 × 15 = 0.8765 − 0.0165 = 0.8600 g/mL
The calculator gives 0.8600 g/mL (rounded to 4 decimal places). At 20 °C, the specific gravity (density relative to water at 4 °C, which is 0.99997 g/mL) is 0.8765 / 0.99997 ≈ 0.8765, essentially the same number because water’s density is close to 1.
Assumptions
- The linear density–temperature relationship is an approximation valid from about 10 °C to 60 °C.
- The reference density of 0.8765 g/mL is for pure benzene (≥99% purity).
- Pressure is assumed to be 1 atm; benzene’s density changes very little with pressure (less than 0.1% per atmosphere).
- The specific gravity uses water at 4 °C as the reference (density 0.99997 g/mL).
Why Benzene’s Density Matters
Benzene (C6H6) is a colorless, highly flammable liquid with a sweet odor. Its density is a fundamental physical property used in:
- Separating mixtures: Because benzene is less dense than water, it floats on water. In a separatory funnel, benzene forms the top layer—useful in extractions.
- Calculating mass from volume: If you need 25.0 g of benzene for a reaction, you can measure it by volume: 25.0 g ÷ 0.8765 g/mL = 28.5 mL.
- Quality control: Density is a quick check for purity; impurities like toluene or water change the value.
- Engineering design: Storage tanks, pipelines, and shipping containers must be sized based on the weight of benzene, which depends on its density.
How Temperature Affects Density
Like most liquids, benzene expands when heated, so its density decreases. The table below shows typical values at several temperatures:
- 0 °C: 0.899 g/mL
- 20 °C: 0.8765 g/mL
- 40 °C: 0.857 g/mL
- 60 °C: 0.839 g/mL
- 80 °C: 0.820 g/mL
These values are approximate (calculated with the linear formula). For precise work, always measure the temperature and use a certified density table or a digital density meter. The coefficient of expansion for benzene is about 0.0011 per °C, which is relatively large—so a 10 °C change shifts the density by about 0.011 g/mL, enough to matter in precise measurements.
Common Mistakes and Misconceptions
One frequent mistake is confusing density with specific gravity. They are numerically equal when the reference is water at 4 °C, but specific gravity is dimensionless. Another error is using the density of benzene at 20 °C for a sample at a different temperature without correcting. Also, some people assume benzene is denser than water because it is an aromatic hydrocarbon—actually, most hydrocarbons are less dense than water; benzene at 0.8765 g/mL is no exception.
Another misconception: “benzene is heavier than air” is true for the vapor (vapor density ~2.7 relative to air), but the liquid is lighter than water. This distinction is important for spill behavior—benzene vapor sinks and can travel along the ground, while the liquid floats on water.
Comparison with Other Common Liquids
To put benzene’s density in context:
- Water: 0.998 g/mL at 20 °C
- Ethanol: 0.789 g/mL
- Hexane: 0.655 g/mL
- Toluene: 0.867 g/mL
- Chloroform: 1.489 g/mL
- Carbon tetrachloride: 1.594 g/mL
Benzene is slightly denser than toluene (methylbenzene) because the methyl group adds volume without proportionally increasing mass. Chlorinated solvents like chloroform are much denser than water, which is why they form the bottom layer in extractions.
Safety and Handling Notes
Benzene is a known human carcinogen (linked to leukemia), and it is highly flammable. Always work in a fume hood, wear appropriate gloves and eye protection, and keep away from ignition sources. When measuring density, never pipette by mouth—use a mechanical pipette or a density meter. Follow your lab’s safety data sheet (SDS) and your supervisor’s instructions. Spills should be contained and absorbed with inert material, not flushed down drains.
Frequently Asked Questions
What is the density of benzene in g/mL at 25 °C?
Using the linear correction: 0.8765 − 0.0011 × (25 − 20) = 0.8765 − 0.0055 = 0.8710 g/mL. Many handbooks list 0.8737 g/mL at 25 °C because they use a more precise polynomial, but the linear approximation is within 0.3%.
Is benzene denser than water?
No. Benzene has a density of about 0.8765 g/mL at 20 °C, while water is about 0.998 g/mL. So benzene floats on water. This is why benzene spills on water spread as a thin film.
How do I convert benzene density from g/mL to kg/m³?
Multiply by 1000. Since 1 g/mL = 1000 kg/m³, benzene at 20 °C is 876.5 kg/m³. For example, 0.8765 g/mL × 1000 = 876.5 kg/m³.
Does pressure affect benzene density?
Yes, but very little. At typical lab pressures (1 atm), the effect is negligible. Increasing pressure by 100 atm only increases density by about 1% because benzene is not very compressible. For most practical purposes, you can ignore pressure.
Why is benzene’s density lower than water despite having a higher molecular weight?
Density depends on both mass and how tightly molecules pack. Benzene molecules (molar mass 78.11 g/mol) are arranged in a less efficient packing than water molecules (18.015 g/mol), which form extensive hydrogen bonds that pull them closer together. So benzene’s molecules are heavier but occupy more volume per molecule, resulting in lower density.
Can I use density to check if my benzene is pure?
Yes, but with caution. If the measured density at 20 °C deviates significantly from 0.8765 g/mL, the sample may be contaminated. Common impurities like toluene (0.867) or water (0.998) will change the density. However, a density check alone is not definitive—use GC or other analytical methods for confirmation.
Related
Formula used
in t | Temperature | °C | 20 | -10 | 150 in d_ref | Density at 20 °C | g/mL | 0.8765 | 0.5 | 1.5 out d | Density at temperature t | g/mL | d_ref - 0.0011 * (t - 20) | 4 out sg | Specific gravity (vs water at 4 °C) | - | d / 0.99997 | 4
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- QPP Calculator Canada: How It Works & How to Use It
- PPP Calculator World Bank: How It Works & How to Use It2,000.00
- PPP Calculator: India vs USA Cost Comparison1,000.00 USD
- PPP Calculator USD to INR: How It Works2,335 INR
- PPP Calculator India vs UK: Real Cost Comparison103.63 GBP
- PPP Calculator India vs Dubai: Real Cost Comparison8,954.58 AED