molecalculator

Moles & Molar Mass

Electron Configuration of Bromine (Br) Explained

Calculator No. 01-9562 · Updated · Formula and assumptions shown below

The calculator on this page is switched off while it is checked. The formula is below, and the worked example shows how to do the sum by hand.

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

The electron configuration of bromine (Br, atomic number 35) is 1s2 2s2 2p6 3s2 3p6 3d10 4s2 4p5, often abbreviated as [Ar] 3d10 4s2 4p5. This arrangement places bromine one electron short of a full 4p subshell, which explains its high reactivity and its tendency to gain one electron to form the bromide ion (Br⁻).

Formula and Notation

The electron configuration is built by following the Aufbau principle, which orders orbitals by increasing energy: 1s, 2s, 2p, 3s, 3p, 4s, 3d, 4p, 5s, 4d, 5p, 6s, 4f, 5d, 6p, 7s, 5f, 6d, 7p. Each orbital holds a maximum number of electrons:

  • s orbitals: 2 electrons
  • p orbitals: 6 electrons
  • d orbitals: 10 electrons
  • f orbitals: 14 electrons

For bromine (Z = 35), you fill orbitals in this order, summing the superscripts until you reach 35 electrons: 2 + 2 + 6 + 2 + 6 + 10 + 2 + 5 = 35. The superscripts indicate the number of electrons in each subshell.

Worked Example

Using the default atomic number 35, let’s build the configuration step by step:

  1. 1s2: 2 electrons (total 2)
  2. 2s2: 2 electrons (total 4)
  3. 2p6: 6 electrons (total 10)
  4. 3s2: 2 electrons (total 12)
  5. 3p6: 6 electrons (total 18)
  6. 4s2: 2 electrons (total 20)
  7. 3d10: 10 electrons (total 30)
  8. 4p5: 5 electrons (total 35)

The full configuration is therefore 1s2 2s2 2p6 3s2 3p6 3d10 4s2 4p5. To shorten it, you replace the core electrons (those matching the previous noble gas, argon) with [Ar]. Argon has 18 electrons (1s2 2s2 2p6 3s2 3p6), so the abbreviated form is [Ar] 3d10 4s2 4p5. The calculator above outputs both forms.

Assumptions

  • The Aufbau principle is followed; exceptions (like chromium or copper) do not apply to bromine.
  • Hund’s rule and the Pauli exclusion principle are obeyed.
  • The configuration is for a neutral, ground-state bromine atom.

Why Bromine’s Configuration Matters

The outermost electrons—the 4s2 and 4p5—are the valence electrons. Bromine has 7 valence electrons, placing it in Group 17 (halogens). Because the 4p subshell needs just one more electron to become a full 4p6 (which would give a stable noble-gas configuration like krypton), bromine readily gains one electron. This explains:

  • Its high electronegativity (2.96 on the Pauling scale).
  • The formation of the bromide ion, Br⁻, in ionic compounds like KBr.
  • Its tendency to form one covalent bond in molecules like HBr or Br₂.

The 3d10 electrons are core-like and do not participate in typical chemical bonding, though they can be involved in some hypervalent compounds (e.g., BrF5) where bromine expands its octet using empty 4d orbitals.

How to Read the Configuration

Each term like 4p5 tells you three things:

  • The principal quantum number (4) indicates the energy level (shell).
  • The letter (p) indicates the subshell shape (s, p, d, f).
  • The superscript (5) is the number of electrons in that subshell.

When you see [Ar] 3d10 4s2 4p5, you know the core is identical to argon, and the remaining 17 electrons are distributed as shown. This notation is compact and widely used in chemistry.

Common Mistakes and Misconceptions

  • Order of 4s and 3d: Some students write 3d before 4s because 3d has a lower number. However, 4s fills before 3d because its energy is slightly lower. In the neutral atom, 4s2 comes before 3d10 in the configuration.
  • Counting electrons: Always sum the superscripts to verify you have 35. A common error is forgetting the 3d10 electrons.
  • Abbreviated notation: The noble-gas core must be the previous noble gas (argon, Z=18), not krypton (Z=36).
  • Valence electrons: For bromine, the valence electrons are only the 4s and 4p ones (7 total), not the 3d electrons.

Related Properties of Bromine

Bromine is a reddish-brown liquid at room temperature (the only nonmetallic element that is liquid at STP besides mercury). Its electron configuration explains its physical and chemical behavior:

  • It is less reactive than fluorine and chlorine but more reactive than iodine.
  • It forms diatomic molecules (Br₂) with a single covalent bond.
  • Its melting point (−7.2 °C) and boiling point (58.8 °C) are influenced by weak London dispersion forces between Br₂ molecules.
  • It is a strong oxidizing agent, though not as strong as Cl₂.

In the periodic table, bromine sits between chlorine and iodine, and its configuration follows the expected trend. The similar configurations of halogens (all ending in ns2 np5) explain their similar chemical properties.

Frequently Asked Questions

What is the electron configuration of Br⁻?

When bromine gains one electron to become Br⁻, the 4p subshell becomes full: 4p6. The configuration becomes [Ar] 3d10 4s2 4p6, which is identical to the noble gas krypton (Z=36). This is why bromide ions are stable and why bromine forms ionic compounds with metals.

Why is bromine’s configuration written as [Ar] 3d10 4s2 4p5 and not [Ar] 4s2 3d10 4p5?

Both notations are technically correct, but the standard order lists subshells in order of increasing principal quantum number (n), so 3d comes before 4s. However, when writing the configuration, you fill 4s before 3d. The abbreviated form often places 3d before 4s for clarity, but some textbooks write 4s2 3d10 4p5. Both are acceptable; the key is that 4s has lower energy than 3d in the neutral atom.

How many valence electrons does bromine have?

Bromine has 7 valence electrons: 2 in the 4s subshell and 5 in the 4p subshell. The 3d10 electrons are core electrons and do not participate in bonding under normal conditions. This is why bromine typically forms one bond or gains one electron.

What is the orbital diagram for bromine?

In an orbital diagram, you draw boxes for each orbital and arrows for electrons. For bromine, the 4p subshell has three orbitals (4px, 4py, 4pz), each holding two electrons. With 5 electrons in 4p, you fill each orbital with one electron (spins parallel) before pairing the second electron in one orbital. This follows Hund’s rule.

Does bromine have any exceptions to the Aufbau principle?

No, bromine follows the Aufbau principle perfectly. Unlike chromium or copper, which have unusual configurations due to half-filled or fully filled d subshells, bromine’s configuration is regular. The 3d subshell is completely filled (10 electrons), and the 4p has 5 electrons, which is one short of half-filled (6 would be full).

How does bromine’s configuration relate to its position in the periodic table?

Bromine is in period 4, group 17. The period number (4) indicates the highest principal quantum number (4s and 4p). The group number (17) indicates 7 valence electrons (ns2 np5). This pattern is consistent across all halogens: fluorine (2s2 2p5), chlorine (3s2 3p5), and iodine (5s2 5p5).

Practical Use of This Calculator

This calculator is a study aid for chemistry students. Enter any atomic number (1–118) to get the full and abbreviated electron configuration. For bromine, the default 35 gives the correct answer. The calculator assumes ground-state neutral atoms and follows the Aufbau principle; it does not account for exceptions like chromium (Z=24) or copper (Z=29). For those elements, you may need to adjust the configuration manually.

When using the configuration to predict chemical behavior, remember that the valence electrons are those in the highest principal energy level (n=4 for bromine). This helps you understand bonding, oxidation states, and periodic trends.

Related

Formula used
in z | Atomic number (Z) | - | 35 | 1
out ec | Electron configuration | - | "1s² 2s² 2p⁶ 3s² 3p⁶ 3d¹⁰ 4s² 4p⁵" | 0
out core | Noble-gas core notation | - | "[Ar] 3d¹⁰ 4s² 4p⁵" | 0

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →