Electron configuration is the arrangement of electrons in an atom’s orbitals, listed by energy level and subshell. You write it as a sequence like 1s² 2s² 2p⁶, which tells you exactly how many electrons occupy each orbital type. This notation predicts an element’s chemical behavior, magnetism, and why the periodic table is shaped the way it is.
Formula
The electron configuration is built by filling orbitals in order of increasing energy, following the Aufbau principle. The order is:
1s → 2s → 2p → 3s → 3p → 4s → 3d → 4p → 5s → 4d → 5p → 6s → 4f → 5d → 6p → 7s → 5f → 6d → 7p
Each orbital type holds a fixed maximum number of electrons:
- s orbitals: 2 electrons (1 orbital)
- p orbitals: 6 electrons (3 orbitals)
- d orbitals: 10 electrons (5 orbitals)
- f orbitals: 14 electrons (7 orbitals)
The superscript in each term (like the ² in 1s²) is the number of electrons in that subshell. The sum of all superscripts equals the atomic number Z for a neutral atom.
Worked Example
Take iron, atomic number 26. Start filling orbitals in order:
- 1s² (2 electrons, total 2)
- 2s² (2, total 4)
- 2p⁶ (6, total 10)
- 3s² (2, total 12)
- 3p⁶ (6, total 18)
- 4s² (2, total 20)
- 3d⁶ (6, total 26)
So iron’s configuration is 1s² 2s² 2p⁶ 3s² 3p⁶ 3d⁶ 4s². Note that 4s fills before 3d because it has lower energy. The unpaired electrons are in the 3d subshell: with 6 electrons in 5 orbitals, Hund’s rule places one electron in each orbital first, then pairs up, leaving 4 unpaired. This matches the calculator’s output.
Assumptions
- The configuration is for a neutral atom in its ground state.
- The Aufbau order applies to most elements; a few transition metals (like chromium and copper) have exceptions due to half-filled or fully filled d subshells being extra stable.
- Orbital energies can shift slightly with electron count, but the standard order is accurate for the vast majority of elements.
How to Read an Electron Configuration
Each term has three parts: the number (principal quantum number n), the letter (subshell type), and the superscript (electron count). For example, 2p⁶ means the second energy level, p subshell, with 6 electrons. The highest occupied energy level (the one with the largest n that has electrons) is called the valence shell. The electrons in that shell—plus any partially filled d or f subshells—are the valence electrons, which determine bonding.
For iron, the valence electrons are the 4s² and the 3d⁶, making 8 valence electrons total. This explains why iron commonly forms +2 and +3 ions: it can lose the two 4s electrons, or lose one additional 3d electron.
Why the Periodic Table Looks the Way It Does
The periodic table is a direct map of electron configurations. Elements in the same column have the same number of valence electrons and similar configurations in their outer shell. For example:
- Group 1 (alkali metals) all end in s¹.
- Group 18 (noble gases) all end in s²p⁶ (except helium, which is just 1s²).
- The d-block (groups 3–12) corresponds to filling the d subshells.
- The f-block (lanthanides and actinides) corresponds to filling the 4f and 5f subshells.
This is why the table has its distinctive block structure: s-block on the left, p-block on the right, d-block in the middle, and f-block pulled out below.
Common Mistakes and Misconceptions
A frequent error is writing 3d before 4s in the notation. Even though 3d fills after 4s, when writing the configuration, convention lists subshells in order of increasing n (so 3d before 4s). The correct notation is 1s² 2s² 2p⁶ 3s² 3p⁶ 3d⁶ 4s², not 1s² 2s² 2p⁶ 3s² 3p⁶ 4s² 3d⁶.
Another mistake is forgetting that p, d, and f subshells hold more than 2 electrons. A p subshell holds 6, not 2. Also, when writing ions, you remove electrons from the highest n first, not from the last filled subshell. For Fe²⁺, you remove the two 4s electrons, giving 1s² 2s² 2p⁶ 3s² 3p⁶ 3d⁶.
Chromium and copper are the classic exceptions: chromium is 3d⁵ 4s¹ (not 3d⁴ 4s²) and copper is 3d¹⁰ 4s¹ (not 3d⁹ 4s²). The half-filled and fully filled d subshells are lower in energy, so the electron moves from 4s to 3d.
What the Configuration Tells You
Beyond the periodic table, the configuration explains:
- Magnetism: Unpaired electrons create magnetic moments. Iron (4 unpaired) is ferromagnetic, while zinc (all paired) is not.
- Color: Transition metal ions with partially filled d orbitals absorb visible light and appear colored. Copper sulfate is blue because of d-d transitions.
- Oxidation states: The number and type of valence electrons dictate how many electrons an atom can lose or gain. Sodium (3s¹) loses one electron; chlorine (3s² 3p⁵) gains one.
- Ionization energy and electronegativity: Atoms with a full shell (noble gases) resist losing electrons; atoms with one electron beyond a full shell (like sodium) lose it easily.
Frequently Asked Questions
What is the difference between electron configuration and orbital diagram?
Electron configuration is a compact notation that lists subshells and electron counts. An orbital diagram (or box diagram) shows each orbital as a box and each electron as an arrow, making it easier to see unpaired electrons and spin. For example, the 2p subshell in nitrogen is shown as three boxes with one arrow each, not as 2p³.
Why does 4s fill before 3d?
Because the 4s orbital has a lower energy than the 3d orbital in neutral atoms. This is due to electron shielding and the penetration of the s orbital. However, once you start filling 3d, the 4s electrons become higher in energy and are removed first when forming cations.
How do I write the configuration for an ion?
Start with the neutral atom’s configuration, then remove electrons from the highest principal quantum number (n) first. For a positive ion, remove the number of electrons equal to the charge. For a negative ion, add electrons to the next available orbital. For example, O²⁻ (oxygen, Z=8) has 10 electrons: 1s² 2s² 2p⁶.
What does the superscript mean in 2p⁶?
The superscript is the number of electrons in that subshell. 2p⁶ means there are 6 electrons in the 2p subshell, which completely fills the three p orbitals (two electrons each). The sum of all superscripts equals the total number of electrons in the atom.
Are there elements that don’t follow the Aufbau principle?
Yes, about 20 elements have exceptions, mostly transition metals, lanthanides, and actinides. The most common are chromium (3d⁵ 4s¹) and copper (3d¹⁰ 4s¹). These occur because a half-filled or fully filled d subshell is more stable than a partially filled one, even if it means moving an electron from the 4s.
How do I find the electron configuration of an element quickly?
Use the periodic table: the row gives the principal quantum number, and the block (s, p, d, f) gives the subshell. Count across the row to find how many electrons are in that subshell. For example, chlorine is in row 3, p-block, and is the 5th element in the p-block, so it ends with 3p⁵.
Limits of the Simple Aufbau Model
The Aufbau principle and the simple filling order work well for the first 30 or so elements, but they are approximations. For heavier elements, relativistic effects and electron-electron interactions cause deviations. The actual ground-state configuration of many transition metals and lanthanides must be determined experimentally or through sophisticated quantum calculations. The simple model is still the best starting point for understanding chemistry, but it is not a universal law.
Related
Formula used
in z | Atomic number (protons) | - | 26 | 1 | 118 out cfg | Electron configuration | - | 1s² 2s² 2p⁶ 3s² 3p⁶ 3d⁶ 4s² | 0 out unpaired | Unpaired electrons | - | 4 | 0
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- QPP Calculator Canada: How It Works & How to Use It
- PPP Calculator World Bank: How It Works & How to Use It2,000.00
- PPP Calculator: India vs USA Cost Comparison1,000.00 USD
- PPP Calculator USD to INR: How It Works2,335 INR
- PPP Calculator India vs UK: Real Cost Comparison103.63 GBP
- PPP Calculator India vs Dubai: Real Cost Comparison8,954.58 AED