The electron configuration of mercury (Hg, element 80) is 1s² 2s² 2p⁶ 3s² 3p⁶ 3d¹⁰ 4s² 4p⁶ 4d¹⁰ 4f¹⁴ 5s² 5p⁶ 5d¹⁰ 6s². In shorthand (noble gas) notation, this is written as [Xe] 4f¹⁴ 5d¹⁰ 6s². This configuration shows mercury’s 80 electrons arranged in shells and subshells, with a completely filled 5d subshell and a filled 6s orbital, which explains its unusual properties as a liquid metal.
Formula and How to Read It
The electron configuration is built by filling atomic orbitals in order of increasing energy, following the aufbau principle, Hund’s rule, and the Pauli exclusion principle. The order of filling is given by the diagonal rule (or Madelung rule): 1s, 2s, 2p, 3s, 3p, 4s, 3d, 4p, 5s, 4d, 5p, 6s, 4f, 5d, 6p, 7s, 5f, 6d, 7p. For mercury (Z = 80), you add 80 electrons in this order, noting that the 4f subshell fills before the 5d, and the 6s fills before the 4f and 5d in the actual order of energies.
Each term in the configuration has a specific meaning:
- Principal quantum number (n): the number before the letter (1, 2, 3, etc.) indicates the electron shell.
- Subshell letter (s, p, d, f): indicates the shape of the orbital. s holds 2 electrons, p holds 6, d holds 10, f holds 14.
- Superscript: the number of electrons in that subshell. For mercury, the sum of all superscripts equals 80.
For example, 5d¹⁰ means there are 10 electrons in the 5d subshell, which is the maximum capacity. Similarly, 6s² means 2 electrons in the 6s subshell, also full.
Worked Example: Writing Hg’s Configuration Step by Step
Using the aufbau order, we fill orbitals with 80 electrons:
- 1s² (2 electrons) → total 2
- 2s² (2) → total 4
- 2p⁶ (6) → total 10
- 3s² (2) → total 12
- 3p⁶ (6) → total 18
- 4s² (2) → total 20
- 3d¹⁰ (10) → total 30
- 4p⁶ (6) → total 36
- 5s² (2) → total 38
- 4d¹⁰ (10) → total 48
- 5p⁶ (6) → total 54
- 6s² (2) → total 56
- 4f¹⁴ (14) → total 70
- 5d¹⁰ (10) → total 80
Writing it all out gives 1s² 2s² 2p⁶ 3s² 3p⁶ 3d¹⁰ 4s² 4p⁶ 4d¹⁰ 4f¹⁴ 5s² 5p⁶ 5d¹⁰ 6s². The shorthand uses the previous noble gas, xenon ([Xe], Z=54), to represent the first 54 electrons, leaving the remaining 26 as 4f¹⁴ 5d¹⁰ 6s².
Assumptions and Limits
- The configuration follows the Madelung rule for neutral atoms in their ground state.
- For ions, electrons are removed from the highest-energy subshell first (for mercury, from 6s before 5d). For example, Hg²⁺ has configuration [Xe] 4f¹⁴ 5d¹⁰.
- This is a theoretical ground-state configuration; actual electron behavior in chemical bonding can involve 5d and 6s orbitals.
Why Mercury’s Configuration Matters
Mercury’s electron configuration explains many of its distinctive properties. The filled 5d and 6s subshells mean there are no partially filled orbitals available for metallic bonding. In most metals, delocalized electrons from partially filled s and d orbitals create strong bonds. In mercury, the 6s electrons are held tightly due to relativistic effects, making them less available for bonding. This results in weak Hg–Hg interactions, which is why mercury is a liquid at room temperature (melting point −38.83 °C) and has a low boiling point (356.73 °C) compared to other metals.
The configuration also explains mercury’s chemical behavior:
- It commonly forms +2 oxidation state (Hg²⁺) by losing the two 6s electrons, leaving a stable [Xe] 4f¹⁴ 5d¹⁰ core.
- It also forms a +1 state as the dimeric ion Hg₂²⁺, where two mercury atoms share a pair of electrons in a covalent bond.
- The filled d subshell gives mercury a high ionization energy and low reactivity; it does not react with dilute acids but dissolves in oxidizing acids like nitric acid.
Common Misconceptions and Mistakes
A frequent error is writing the configuration in the order of filling rather than the order of increasing principal quantum number. For example, writing 4s² 3d¹⁰ is acceptable in some contexts, but the standard notation lists subshells by increasing n (3d before 4s) for clarity. For mercury, the correct standard order is 4f¹⁴ 5d¹⁰ 6s², not 6s² 4f¹⁴ 5d¹⁰.
Another misconception is that the 4f subshell is filled after the 5d. In reality, the 4f fills before the 5d in the aufbau sequence, so for mercury, the 4f is complete before the 5d gets electrons. That is why the shorthand is [Xe] 4f¹⁴ 5d¹⁰ 6s², not [Xe] 5d¹⁰ 4f¹⁴ 6s².
Also, when writing the configuration for ions, remember that electrons are removed from the highest-energy subshell first. For mercury, that means removing the 6s electrons before the 5d. So Hg²⁺ is [Xe] 4f¹⁴ 5d¹⁰, not [Xe] 4f¹⁴ 5d⁸ 6s².
Comparison with Neighboring Elements
Mercury sits in group 12 of the periodic table, below zinc and cadmium. All three have a filled (n−1)d¹⁰ ns² configuration:
- Zinc (Z=30): [Ar] 3d¹⁰ 4s²
- Cadmium (Z=48): [Kr] 4d¹⁰ 5s²
- Mercury (Z=80): [Xe] 4f¹⁴ 5d¹⁰ 6s²
Despite the similarity, mercury is unique: it is the only metal that is liquid at standard conditions, while zinc and cadmium are solids. The key difference is the relativistic contraction of the 6s orbital in mercury, which strengthens the bond between the 6s electrons and the nucleus, making them less available for metallic bonding. This effect is much weaker for the 4s and 5s orbitals in zinc and cadmium.
How to Use the Calculator Above
This calculator provides the electron configuration for any element with atomic number from 1 to 118. Enter the atomic number (Z) of the element you want, and it will output the full configuration and the noble gas shorthand. The default is mercury (Z=80), but you can change it to any other element. Note that the configuration is generated based on the aufbau principle; for a few elements (like chromium and copper), the actual configuration deviates due to half-filled or fully filled subshell stability. For those exceptions, the calculator will show the predicted configuration, which may differ from the experimentally observed one.
Frequently Asked Questions
What is the electron configuration of Hg in shorthand?
The shorthand electron configuration of mercury is [Xe] 4f¹⁴ 5d¹⁰ 6s². This means that the 54 electrons of xenon are present, plus 14 in the 4f subshell, 10 in the 5d, and 2 in the 6s.
Why is mercury a liquid at room temperature?
Mercury’s liquid state is largely due to its electron configuration and relativistic effects. The 6s electrons are held tightly to the nucleus, so they are not easily shared between atoms. This weakens metallic bonding, so mercury atoms do not stick together strongly, resulting in a low melting point.
What is the electron configuration of Hg²⁺?
For the Hg²⁺ ion, remove the two 6s electrons first. The configuration becomes [Xe] 4f¹⁴ 5d¹⁰, which is a completely filled 5d subshell. This is a stable configuration, which is why Hg²⁺ is a common oxidation state.
Does mercury have an incomplete d subshell?
No, mercury has a completely filled 5d subshell (5d¹⁰). This is unusual among transition metals, which often have partially filled d subshells. The filled d subshell contributes to mercury’s low reactivity and its classification as a post-transition metal in some contexts.
How many valence electrons does mercury have?
Mercury has two valence electrons in the 6s subshell. Although the 5d electrons are in the outer shell, they are not typically considered valence electrons because they are not involved in bonding. The two 6s electrons are the ones that participate in chemical reactions.
Why is the configuration written as 4f¹⁴ 5d¹⁰ 6s² and not 6s² 4f¹⁴ 5d¹⁰?
The standard notation lists subshells in order of increasing principal quantum number (n), not in the order of filling. Since 4f has n=4, 5d has n=5, and 6s has n=6, they are written in that order. This is a convention for clarity, even though the 6s is filled before the 4f and 5d in the aufbau process.
Related
Formula used
in z | Atomic number (Z) | - | 80 | 1 | 118 out config | Full electron configuration | - | "1s² 2s² 2p⁶ 3s² 3p⁶ 3d¹⁰ 4s² 4p⁶ 4d¹⁰ 4f¹⁴ 5s² 5p⁶ 5d¹⁰ 6s²" | 0 out shorthand | Noble gas shorthand | - | "[Xe] 4f¹⁴ 5d¹⁰ 6s²" | 0
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- QPP Calculator Canada: How It Works & How to Use It
- PPP Calculator World Bank: How It Works & How to Use It2,000.00
- PPP Calculator: India vs USA Cost Comparison1,000.00 USD
- PPP Calculator USD to INR: How It Works2,335 INR
- PPP Calculator India vs UK: Real Cost Comparison103.63 GBP
- PPP Calculator India vs Dubai: Real Cost Comparison8,954.58 AED