Electron configuration is the distribution of an atom’s electrons among its orbitals, written as a sequence of subshell labels like 1s² 2s² 2p⁶. To find it for any element, you fill orbitals in order of increasing energy (Aufbau principle) and stop when you’ve placed all the atom’s electrons. The result tells you how the electrons are arranged, which explains the element’s chemical behavior, magnetism, and position in the periodic table.
Formula
The electron configuration is built by applying the Aufbau principle: electrons occupy the lowest-energy orbitals first. The filling order follows the diagonal rule (Madelung rule):
1s → 2s → 2p → 3s → 3p → 4s → 3d → 4p → 5s → 4d → 5p → 6s → 4f → 5d → 6p → 7s → 5f → 6d → 7p
Each orbital holds a maximum number of electrons:
- s orbitals: 2 electrons (1 orbital)
- p orbitals: 6 electrons (3 orbitals)
- d orbitals: 10 electrons (5 orbitals)
- f orbitals: 14 electrons (7 orbitals)
The superscript in each subshell (e.g., the “2” in 2s²) is the number of electrons in that subshell. The sum of all superscripts equals the atomic number Z for a neutral atom. The noble-gas shorthand replaces the filled core with the symbol of the preceding noble gas in brackets, e.g., [Ar] for 1s² 2s² 2p⁶ 3s² 3p⁶.
Worked Example
Find the electron configuration of iron (Fe), atomic number Z = 26.
Step 1: List the filling order and count electrons until you reach 26.
1s² (2 electrons) → 2s² (4) → 2p⁶ (10) → 3s² (12) → 3p⁶ (18) → 4s² (20) → 3d⁶ (26)
Step 2: Write the full configuration: 1s² 2s² 2p⁶ 3s² 3p⁶ 4s² 3d⁶
Step 3: Find the preceding noble gas: argon (Ar) has Z = 18, so the core is [Ar].
Step 4: Write the shorthand: [Ar] 4s² 3d⁶
Step 5: Count unpaired electrons in the partially filled subshells. The 4s is full (paired). The 3d subshell has 6 electrons in 5 orbitals; by Hund’s rule, they fill singly first, then pair: ↑ ↑ ↑ ↑ ↓ (four unpaired). So iron has 4 unpaired electrons.
Assumptions
- The atom is neutral (number of electrons = atomic number Z).
- The Aufbau order applies; this is the ground-state configuration, not an excited state.
- Hund’s rule applies: electrons fill each orbital of a subshell singly before pairing.
- For transition metals and lanthanides, actual configurations may deviate slightly (e.g., chromium and copper) due to half-filled and fully filled d-subshell stability.
How to Read the Configuration
The configuration is read left to right as a map of the atom’s energy levels. The first number is the principal quantum number (shell), the letter is the subshell shape (s, p, d, f), and the superscript is the electron count in that subshell. For example, 2p⁶ means six electrons in the p subshell of the second shell.
The outermost electrons (highest principal quantum number, plus any partially filled d or f subshells) are the valence electrons. These determine bonding behavior: elements in the same group have the same valence configuration, which is why the periodic table columns share chemical properties. For iron, the valence electrons are 4s² 3d⁶, totaling 8, which explains its common +2 and +3 oxidation states.
Common Mistakes
- Filling 3d before 4s: The 4s is lower in energy than 3d, so it fills first. However, when writing the configuration, 3d comes before 4s in the notation order (by principal quantum number), which confuses many students.
- Forgetting exceptions: Chromium (Z=24) is [Ar] 4s¹ 3d⁵, not 4s² 3d⁴; copper (Z=29) is [Ar] 4s¹ 3d¹⁰. A half-filled or fully filled d subshell is more stable than the Aufbau prediction.
- Counting electrons wrong: Always sum the superscripts to verify they equal Z. A quick check catches missing or extra electrons.
- Confusing ions: For cations, remove electrons from the highest-energy subshell first, which is often the s subshell before the d. For Fe²⁺, remove two 4s electrons: [Ar] 3d⁶.
Why It Matters
Electron configuration is the foundation of chemistry because it predicts reactivity, bonding, and physical properties. Elements with full outer shells (noble gases) are inert; those with one electron short (halogens) are highly reactive; those with one extra (alkali metals) are even more reactive. Transition metals’ partially filled d orbitals give them variable oxidation states, colored compounds, and catalytic activity. Magnetic behavior also follows configuration: unpaired electrons create paramagnetism, while all-paired electrons give diamagnetism. The configuration explains the periodic trends in atomic radius, ionization energy, and electronegativity—all of which trace back to how tightly the outermost electrons are held.
How to Choose the Right Method
For most elements, the Aufbau order works fine. Use the full configuration when you need every subshell explicitly, such as in quantum mechanics problems or when analyzing X-ray spectra. Use the noble-gas shorthand when you only care about valence electrons, which is most of the time in chemistry. For ions, start with the neutral atom’s configuration and adjust: remove electrons for cations (from the highest n first), add electrons for anions (into the next available orbital). For elements beyond the lanthanides, you must account for f-orbital filling and relativistic effects that alter the simple order; these require reference tables rather than memory.
Limits of the Aufbau Rule
The Aufbau principle is a useful approximation, not a law. It fails for roughly 20 elements, mostly in the d and f blocks, where electron-electron repulsion and exchange energy favor different arrangements. Examples include niobium (Z=41), palladium (Z=46), and gold (Z=79). The rule also assumes a single-electron picture; in reality, orbitals shift in energy as they fill. For precise configurations of heavy elements, spectroscopically determined values are the authority. Additionally, the notation assumes a non-relativistic treatment; for elements above Z≈70, relativistic effects contract s orbitals and expand d and f orbitals, altering energies. Always check a reliable periodic table for the actual ground-state configuration of transition metals and lanthanides.
Frequently Asked Questions
Why is 4s filled before 3d? The 4s orbital has a lower energy than 3d for neutral atoms, even though 4 is a higher principal quantum number. This is because the 4s electron penetrates closer to the nucleus, experiencing less shielding. Once the 3d orbitals begin to fill, they drop below 4s in energy, which is why transition metals lose 4s electrons first when forming cations.
What is the difference between electron configuration and orbital diagram? Electron configuration is a compact notation listing subshells and electron counts (e.g., 1s² 2s²). An orbital diagram uses boxes or lines for each orbital with arrows for electrons, showing spin and pairing explicitly. The configuration tells you how many electrons are in each subshell; the diagram shows their arrangement within the orbitals, which matters for Hund’s rule and magnetism.
How do I write the configuration for an ion? Start with the neutral atom’s configuration, then add or remove electrons. For cations, remove from the highest principal quantum number first—so for Fe²⁺, remove two 4s electrons to get [Ar] 3d⁶. For anions, add electrons to the next available orbital: O²⁻ adds two to 2p, giving 1s² 2s² 2p⁶. Never remove from a lower shell before emptying a higher one.
Why do chromium and copper break the Aufbau rule? A half-filled (d⁵) or fully filled (d¹⁰) d subshell has extra stability from exchange energy and reduced electron-electron repulsion. Chromium promotes one 4s electron to make 3d⁵, and copper promotes one to make 3d¹⁰. The energy cost of promotion is smaller than the stability gained. Similar exceptions occur in molybdenum, silver, and gold.
What does the superscript number mean? The superscript is the number of electrons in that subshell, not the number of orbitals. For example, 2p⁶ means six electrons distributed among three p orbitals (two per orbital, opposite spins). The sum of all superscripts equals the total electron count, which for a neutral atom is the atomic number.
Can I predict the configuration of any element from memory? For the first 36 elements, yes, using the Aufbau order and remembering the four exceptions (Cr, Cu, and their immediate neighbors). Beyond that, d- and f-block elements have many irregularities, so it’s safer to use a periodic table that lists configurations. The diagonal rule works for roughly 80% of elements, but the exceptions become more frequent as Z increases.
Related
Formula used
in z | Atomic number Z | - | 26 | 1 | 118 out conf | Electron configuration | - | 1s2 2s2 2p6 3s2 3p6 4s2 3d6 | 0 out noble | Noble-gas shorthand | - | [Ar] 4s2 3d6 | 0 out unpaired | Unpaired electrons | - | 4 | 0
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- QPP Calculator Canada: How It Works & How to Use It
- PPP Calculator World Bank: How It Works & How to Use It2,000.00
- PPP Calculator: India vs USA Cost Comparison1,000.00 USD
- PPP Calculator USD to INR: How It Works2,335 INR
- PPP Calculator India vs UK: Real Cost Comparison103.63 GBP
- PPP Calculator India vs Dubai: Real Cost Comparison8,954.58 AED