molecalculator

Moles & Molar Mass

Element with 1 Proton and 2 Electrons? It’s a Negative Hydrogen Ion

Calculator No. 01-9281 · Updated · Formula and assumptions shown below

The calculator on this page is switched off while it is checked. The formula is below, and the worked example shows how to do the sum by hand.

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

The element with 1 proton and 2 electrons is hydrogen, but specifically in its anion form, the hydride ion (H−). A neutral hydrogen atom has 1 proton and 1 electron; adding a second electron gives it a net charge of −1, creating a hydride ion.

What Defines an Element?

The number of protons in the nucleus is the fundamental identity of an element. Every atom with exactly 1 proton is hydrogen, regardless of how many neutrons or electrons it carries. This is the basis of the periodic table: atomic number = proton count. So the question “element with 1 proton” has a single answer: hydrogen.

Electrons, on the other hand, are negotiable. An atom can gain or lose electrons to become an ion, and the number of electrons does not change the element’s identity. The charge on the particle is simply the difference between protons and electrons:

  • Protons = electrons → neutral atom
  • Protons > electrons → positive ion (cation)
  • Protons < electrons → negative ion (anion)

For hydrogen, the possibilities are:

  • 1 proton, 0 electrons → H+ (a bare proton)
  • 1 proton, 1 electron → neutral H
  • 1 proton, 2 electrons → H− (hydride ion)

The Hydride Ion (H−)

When a hydrogen atom gains an extra electron, it becomes the hydride ion, H−. This ion has a complete 1s2 electron configuration, which gives it a closed-shell stability similar to the noble gas helium (which has 2 protons and 2 electrons). That electron configuration is why hydride is relatively stable compared to a bare proton or a neutral hydrogen atom in many chemical environments.

Hydride is a strong base and a strong reducing agent. It readily reacts with water to produce hydrogen gas and hydroxide ions:

H− + H2O → H2 + OH−

This reaction is vigorous and must be handled with care in the lab. Hydride ions are found in metal hydrides such as sodium hydride (NaH), lithium aluminum hydride (LiAlH4), and sodium borohydride (NaBH4), which are common reducing agents in organic chemistry.

How the Ion Forms

Hydrogen has an electronegativity of 2.20 on the Pauling scale. When it bonds with a metal that has much lower electronegativity (like sodium, 0.93), the metal donates its electron to hydrogen, forming a hydride ion. For example, sodium and hydrogen react at elevated temperatures:

2 Na + H2 → 2 NaH

In NaH, the sodium exists as Na+ and hydrogen as H−. This is an ionic hydride. In contrast, when hydrogen bonds with a more electronegative element like oxygen or chlorine, it typically loses its electron to form H+ (as in acids).

Hydride ions can also exist in the gas phase, for instance in a plasma or in certain astrophysical environments. The H− ion is actually an important source of opacity in the Sun’s atmosphere, absorbing visible light.

Common Misconceptions

A frequent confusion is thinking that changing the electron count changes the element. That is false. If an atom has 1 proton, it is always hydrogen, no matter how many electrons it has. The element name and symbol are tied solely to the proton number.

Another misconception is that the hydride ion is the same as a hydrogen molecule (H2). They are entirely different: H2 is two neutral hydrogen atoms sharing electrons covalently, while H− is a single hydrogen nucleus with two electrons.

Some people also wonder if H− is the same as a “hydrogen anion” – yes, it is. The terms are interchangeable.

Isotopes of Hydrogen

Hydrogen has three naturally occurring isotopes, all with 1 proton but different numbers of neutrons:

  • Protium (1H): 1 proton, 0 neutrons – the most common (about 99.98%)
  • Deuterium (2H or D): 1 proton, 1 neutron – about 0.02%
  • Tritium (3H or T): 1 proton, 2 neutrons – radioactive, trace amounts

All three isotopes can form hydride ions. For example, deuteride (D−) and tritide (T−) exist, though they are less common in everyday chemistry. The chemical behavior of hydride ions is essentially the same regardless of the isotope, though reaction rates can differ slightly due to the mass difference (a kinetic isotope effect).

Why the Electron Configuration Matters

The electron configuration of an atom or ion determines its chemical reactivity. For hydrogen:

  • H (neutral): 1s1 – one unpaired electron, highly reactive, forms covalent bonds.
  • H+: 1s0 – no electrons, a bare proton, extremely acidic.
  • H−: 1s2 – filled shell, relatively stable, acts as a strong base/nucleophile.

The filled 1s2 shell mimics helium’s electron configuration, which is why hydride is often compared to helium in terms of electronic structure. However, the nuclear charge is only +1, so the two electrons are held less tightly than in helium (nuclear charge +2), making H− a much larger and more polarizable ion.

Real-World Relevance

Hydride ions are not just a textbook curiosity. They play key roles in:

  • Organic chemistry: Reducing agents like LiAlH4 and NaBH4 transfer H− to carbonyl groups, converting ketones to alcohols, for example.
  • Hydrogen storage: Metal hydrides can store hydrogen reversibly for fuel cells.
  • Astrophysics: H− is the main source of visible-light opacity in the Sun, affecting how energy escapes from the Sun’s photosphere.
  • Semiconductor manufacturing: Hydride gases like arsine (AsH3) and phosphine (PH3) are used in doping silicon.

Frequently Asked Questions

Is H− an element?

No, it is an ion of the element hydrogen. An element is defined by its proton number; ions are charged forms of elements.

What is the difference between H− and H+?

H+ is a hydrogen atom that lost its electron, leaving a bare proton. H− is a hydrogen atom that gained an extra electron, giving it two electrons. H+ is acidic and tiny; H− is basic, larger, and has a filled electron shell.

Can H− exist on its own?

Yes, in the gas phase or in ionic crystals like NaH. In solution, it reacts rapidly with water, so it is not stable in aqueous environments.

Why is H− a strong reducing agent?

Because it has an extra electron that it readily donates. In redox reactions, H− is oxidized to H2 or H+, releasing that electron to reduce another species.

Does H− have a name other than hydride?

It is also called the hydrogen anion or negative hydrogen ion. In some contexts, it is referred to as a “hydride ion” specifically when bonded to a metal.

Safety Note

Metal hydrides like NaH and LiAlH4 are highly reactive and can ignite or release hydrogen gas on contact with moisture. Always follow your lab’s safety data sheets (SDS) and your supervisor’s instructions when handling these compounds. Never mix hydrides with water unless you are following a controlled procedure designed to manage the vigorous reaction.

Related

Formula used
in n | Number of protons | - | 1 | 0
in e | Number of electrons | - | 2 | 0
out charge | Net charge | e | e - n | 0
out name | Species | - | (n == 1 && e == 1) ? "Neutral hydrogen atom (H)" : ((n == 1 && e == 2) ? "Hydride ion (H−)" : ((n == 1 && e == 0) ? "Hydrogen cation (H+)" : "Not a hydrogen species")) | 0

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →