Enthalpy change (ΔH) is the heat energy transferred in a reaction at constant pressure, measured in kilojoules per mole (kJ/mol). In A Level chemistry, you need to know that it is the difference between the enthalpy of products and reactants, and its sign tells you whether a reaction is exothermic (negative, heat released) or endothermic (positive, heat absorbed).
Formula
The enthalpy change is calculated from calorimetry using two steps. First, find the heat energy absorbed or released by the solution:
q = m × c × ΔT
- q = heat energy in joules (J)
- m = mass of the solution in grams (g)
- c = specific heat capacity of the solution in J/g·K (for dilute aqueous solutions, use 4.18 J/g·K, the value for water)
- ΔT = temperature change in kelvin (K) or °C – the numerical value is the same because a 1 K change equals a 1 °C change
Then convert to enthalpy change per mole of the limiting reactant:
ΔH = −q / n
- ΔH = enthalpy change in kJ/mol
- n = moles of the limiting reactant (mol)
- The negative sign is conventional: if the temperature rises (exothermic), q is positive, so ΔH becomes negative.
Worked Example
Using the default values from the calculator: 100 g of solution, specific heat capacity 4.18 J/g·K, temperature change 10.5 °C, and 0.050 mol of limiting reactant.
Step 1 – calculate the heat energy:
q = 100 g × 4.18 J/g·K × 10.5 K = 4389 J
Step 2 – convert to kJ: 4389 J / 1000 = 4.389 kJ
Step 3 – divide by moles: ΔH = −4.389 kJ / 0.050 mol = −87.78 kJ/mol
The calculator rounds to two decimal places, giving ΔH = −87.78 kJ/mol. The negative sign shows the reaction is exothermic.
Assumptions
- The specific heat capacity of the solution equals that of pure water (4.18 J/g·K).
- The density of the solution is 1.00 g/mL, so volume in mL equals mass in g.
- No heat is lost to the surroundings – the calorimeter is perfectly insulated.
- The reaction goes to completion and the limiting reactant is fully consumed.
- The temperature change is measured accurately and the initial and final temperatures are recorded correctly.
What Enthalpy Change Actually Means
Enthalpy (H) is a thermodynamic quantity that represents the total heat content of a system at constant pressure. You cannot measure absolute enthalpy, only its change (ΔH). In A Level chemistry, you will encounter several specific types of enthalpy change, each defined under standard conditions (298 K and 100 kPa):
- Standard enthalpy change of formation (ΔHf°) – enthalpy change when one mole of a compound forms from its elements in their standard states.
- Standard enthalpy change of combustion (ΔHc°) – enthalpy change when one mole of a substance burns completely in oxygen.
- Standard enthalpy change of neutralisation (ΔHneut°) – enthalpy change when an acid and base react to form one mole of water.
- Standard enthalpy change of reaction (ΔHr°) – enthalpy change for a reaction as written, with quantities in the balanced equation.
These definitions are central to A Level questions, and you should be able to write them out precisely, including the phrase “under standard conditions” and the quantity (one mole of substance or one mole of water).
How to Measure Enthalpy Change
In the lab, you measure enthalpy changes using calorimetry. There are two common methods:
- Solution calorimetry – for reactions in solution, like neutralisation or displacement. You mix reactants in an insulated cup, record the temperature rise or fall, then use q = mcΔT.
- Flame calorimetry – for combustion reactions. You burn a known mass of fuel and use the heat to warm a known volume of water, then calculate the enthalpy change per mole of fuel burned.
In both methods, the key is to measure the temperature change accurately. For combustion, you also need to weigh the fuel before and after burning to find the mass burned. Then convert mass to moles using molar mass.
Common Mistakes and Misconceptions
- Forgetting the negative sign – exothermic reactions have negative ΔH. Many students write positive values for combustion or neutralisation.
- Using the wrong mass – in solution calorimetry, use the total mass of the solution (usually the volume in mL because density is 1 g/mL), not just the mass of the limiting reactant.
- Mixing up °C and K – for temperature change, the numerical value is the same in both scales, but absolute temperatures must be in kelvin.
- Ignoring heat loss – in real experiments, heat escapes, so measured temperature changes are smaller than ideal. This makes experimental ΔH values less exothermic (less negative) than theoretical values.
- Not dividing by moles – enthalpy change is per mole, so you must divide the heat energy by the number of moles of the substance specified in the definition.
Hess’s Law and Enthalpy Cycles
Hess’s law states that the enthalpy change for a reaction is independent of the route taken, as long as the initial and final conditions are the same. This allows you to calculate enthalpy changes that are difficult to measure directly, such as formation enthalpies of organic compounds. You can use two main types of cycles:
- Formation cycles – using ΔHf° values: ΔHr° = ΣΔHf°(products) − ΣΔHf°(reactants)
- Combustion cycles – using ΔHc° values: ΔHr° = ΣΔHc°(reactants) − ΣΔHc°(products)
In A Level exams, you will often be asked to construct these cycles and apply the equations. The key is to draw the cycle correctly and then add or subtract the enthalpy values with the correct signs.
Bond Enthalpies
Another way to estimate enthalpy changes is using mean bond enthalpies. A bond enthalpy is the energy required to break one mole of a specific covalent bond in the gaseous state. For a reaction, you can estimate:
ΔH = Σ(bond enthalpies of bonds broken) − Σ(bond enthalpies of bonds formed)
This method gives only an estimate because mean bond enthalpies are averages taken from many compounds. It works best for gaseous reactions. The values are always positive for breaking bonds (endothermic) and negative for forming bonds (exothermic). In practice, the sum of bonds broken minus bonds formed gives the overall enthalpy change.
Frequently Asked Questions
What is the difference between enthalpy change and heat energy? Heat energy (q) is the total energy transferred, measured in joules. Enthalpy change (ΔH) is the heat energy per mole of substance, measured in kJ/mol. For example, burning 0.5 mol of methane releases 445 kJ of heat, so ΔH = −890 kJ/mol.
Why is ΔH negative for exothermic reactions? In an exothermic reaction, the products have less enthalpy than the reactants, so the change (products − reactants) is negative. The heat released is written as a product, and the system loses energy to the surroundings.
How do I convert between kJ/mol and J/mol? Multiply by 1000 to go from kJ/mol to J/mol, or divide by 1000 to go from J/mol to kJ/mol. For example, −87.78 kJ/mol = −87780 J/mol.
What are standard conditions for enthalpy changes? Standard conditions are 298 K (25 °C) and 100 kPa pressure, with all substances in their standard states. The standard enthalpy change is denoted with a superscript °, like ΔHc°.
Why do experimental enthalpy values differ from theoretical ones? Experimental values are usually less exothermic (less negative) because heat is lost to the surroundings, incomplete combustion occurs, or the specific heat capacity of the solution is not exactly 4.18. These errors can be reduced with better insulation and stirring.
Can enthalpy change be positive? Yes, endothermic reactions have positive ΔH. Examples include thermal decomposition of calcium carbonate and photosynthesis. The products have more enthalpy than the reactants, so energy is absorbed from the surroundings.
Related
Formula used
in m | Mass of solution | g | 100 | 0 in c | Specific heat capacity | J/g·K | 4.18 | 0 in dt | Temperature change | °C | 10.5 | -273.15 in n | Moles of limiting reactant | mol | 0.050 | 0 out q | Heat energy | J | m * c * dt | 1 out dh | Enthalpy change | kJ/mol | -q / 1000 / n | 2
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- ug to ppb Calculator: Convert Micrograms per Liter1.00 ppb
- Grams to Moles Chemistry: How to Convert0.2000 mol/L
- Convert ug/l to ppb Calculator
- CPP Calculator Ontario: How CPP Is Calculated162.12 $/month
- Grams to Moles to Molecules: How to Convert0.2000 mol/L
- Organic Chemistry Reaction Calculator: How It Works