The enthalpy change of solution is the heat energy absorbed or released when one mole of a solute dissolves completely in a solvent at constant pressure. You calculate it from the temperature change of the solution using q = mcΔT, then divide by the number of moles of solute. This page explains the definition, the calculation method, and the factors that determine whether dissolving a substance feels hot or cold.
Formula
The enthalpy change of solution, ΔHsol, is calculated using two linked equations:
q = msolution × c × ΔT
ΔHsol = q / n
where:
- q = heat energy absorbed or released (J)
- msolution = mass of the solution (g) – usually taken as the volume in mL because the density of a dilute aqueous solution is ≈ 1 g/mL
- c = specific heat capacity of the solution (J g⁻¹ K⁻¹) – for dilute aqueous solutions, use 4.18 J g⁻¹ K⁻¹ (same as water)
- ΔT = temperature change (K or °C, the difference is the same)
- n = number of moles of solute dissolved (mol) = mass of solute (g) / molar mass (g/mol)
The sign of ΔT tells you the sign of ΔHsol: a temperature rise means heat is released, so ΔHsol is negative (exothermic); a temperature fall means heat is absorbed, so ΔHsol is positive (endothermic).
Worked Example
Using the default values from the calculator: 2.922 g of sodium chloride (NaCl, molar mass 58.44 g/mol) is dissolved in 250 mL of water, and the temperature falls by 1.5 °C.
- Calculate moles of NaCl: n = 2.922 g / 58.44 g/mol = 0.05000 mol
- Find the mass of the solution: 250 mL × 1 g/mL = 250 g
- Calculate q: q = 250 g × 4.18 J g⁻¹ K⁻¹ × 1.5 K = 1567.5 J
- Convert to kJ: 1567.5 J / 1000 = 1.5675 kJ
- Calculate ΔHsol: ΔHsol = 1.5675 kJ / 0.05000 mol = +31.35 kJ/mol
The calculator gives +31.35 kJ/mol (rounded to 2 decimal places). The positive sign confirms that dissolving NaCl in water is endothermic – the solution gets colder.
Assumptions
- The solution is dilute enough that its density and specific heat capacity are the same as pure water (1 g/mL and 4.18 J g⁻¹ K⁻¹).
- No heat is lost to the surroundings – in practice you use a polystyrene cup as a calorimeter to minimise heat loss.
- All the solute dissolves completely.
- The temperature change is measured accurately enough that the heat capacity of the cup itself is negligible.
Why Does Dissolving Release or Absorb Heat?
The enthalpy change of solution is the net result of two opposing energy terms:
- Lattice enthalpy (endothermic): energy is absorbed to break the ionic or molecular attractions holding the solute together. For an ionic solid, this is the lattice dissociation energy.
- Hydration enthalpy (exothermic): energy is released when solute particles form new attractions with water molecules. For ions, this is the hydration enthalpy (always negative).
If the hydration energy is larger than the lattice energy, the overall process is exothermic (ΔHsol negative). If the lattice energy is larger, the process is endothermic (ΔHsol positive). For example, dissolving lithium chloride (LiCl) releases heat, while dissolving ammonium nitrate (NH₄NO₃) absorbs a lot of heat – which is why instant cold packs use ammonium nitrate.
How to Measure ΔHsol in the Lab
A simple experiment uses a polystyrene cup (a good insulator) and a thermometer:
- Measure a known volume of distilled water into the cup (e.g., 50 mL) and record its initial temperature.
- Weigh a known mass of solute (e.g., 5 g).
- Add the solute quickly, stir gently with the thermometer, and record the maximum or minimum temperature reached.
- Calculate q using the mass of the solution (water + solute) and the temperature change.
- Convert to kJ and divide by moles of solute to get ΔHsol in kJ/mol.
Always follow your lab method and the safety data sheet (SDS) for the solute you use. Some solutes (e.g., concentrated acids) can cause burns – wear goggles and gloves.
Common Mistakes and How to Avoid Them
- Using the mass of solute only: the mass in q = mcΔT must be the mass of the whole solution (water + solute), not just the solute.
- Forgetting to convert J to kJ: ΔHsol is usually quoted in kJ/mol, so divide q by 1000.
- Ignoring the sign: a temperature rise gives a negative ΔHsol; a temperature fall gives a positive ΔHsol. Many students write positive for exothermic – check the convention.
- Using °C as if it were K for ΔT: a change of 1 °C equals a change of 1 K, so this is actually fine – but never add 273 to ΔT.
- Not accounting for heat loss: in a real experiment, some heat escapes, so the measured ΔT is smaller than the ideal value. This makes exothermic values appear less negative and endothermic values appear less positive.
Limits of the Simple Calculation
The simple q = mcΔT method assumes that the solution has the same density and specific heat capacity as water. This is only true for dilute solutions – for concentrated solutions, both values differ, and the result becomes less accurate. Also, the heat capacity of the polystyrene cup is ignored; for very accurate work you would calibrate the calorimeter. In addition, some solutes react with water (e.g., anhydrous salts may hydrolyse), so the measured ΔHsol includes that reaction heat, not just the physical dissolution.
Frequently Asked Questions
Why is the enthalpy change of solution sometimes positive and sometimes negative?
It depends on the relative sizes of the lattice enthalpy (energy needed to break apart the solute) and the hydration enthalpy (energy released when solute particles bond to water). If hydration releases more energy than lattice absorption, the overall process is exothermic (negative ΔHsol); if lattice requires more, it is endothermic (positive ΔHsol). For example, NaOH dissolves exothermically, while NH₄Cl dissolves endothermically.
What is the difference between enthalpy of solution and enthalpy of hydration?
Enthalpy of hydration is the heat change when one mole of gaseous ions dissolves in water to form an infinitely dilute solution – it is always exothermic. Enthalpy of solution is the heat change when one mole of solute (solid, liquid or gas) dissolves in a solvent – it can be positive or negative. Hydration is only one part of the solution process; the other is the lattice (or vaporisation) enthalpy.
Why do I use the mass of the solution, not the mass of water, in q = mcΔT?
Because the solute also absorbs or releases heat as it warms or cools to the final temperature. The heat capacity of the solute is small compared to water, but for accuracy you use the total mass of the final solution (water + solute). In dilute solutions, the solute mass is often negligible, so many textbooks use just the water mass – but the correct approach is to include the solute.
What is the standard enthalpy change of solution?
The standard enthalpy change of solution (ΔHsol°) is the enthalpy change when one mole of solute dissolves in a solvent to form an infinitely dilute solution, measured under standard conditions (usually 1 bar pressure and a stated temperature, often 25 °C). “Infinitely dilute” means that adding more solvent causes no further heat change – the solute is fully separated and surrounded by solvent.
How does temperature affect the enthalpy change of solution?
The enthalpy change of solution itself varies slightly with temperature because the heat capacities of the solute and solution differ. However, for A level purposes, you usually assume ΔHsol is constant over the small temperature range of the experiment. The temperature change you measure is the result of the enthalpy change, not a cause of it.
Related
Formula used
in m | Mass of solute | g | 2.922 | 0 in mm | Molar mass | g/mol | 58.44 | 0.001 in v | Final solution volume | mL | 250 | 0.001 in dt | Temperature change | °C | 1.5 | 0 out q | Heat energy q | J | m / mm * 1000 * 4.18 * dt | 1 out dH | Enthalpy change of solution | kJ/mol | m / mm * 1000 * 4.18 * dt / 1000 | 2
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- ug to ppb Calculator: Convert Micrograms per Liter1.00 ppb
- Grams to Moles Chemistry: How to Convert0.2000 mol/L
- Convert ug/l to ppb Calculator
- CPP Calculator Ontario: How CPP Is Calculated162.12 $/month
- Grams to Moles to Molecules: How to Convert0.2000 mol/L
- Organic Chemistry Reaction Calculator: How It Works