The enthalpy of solution (ΔHsol) is the heat absorbed or released when one mole of a solute dissolves in a solvent at constant pressure. This calculator lets you work out the molar enthalpy of solution from the heat measured in a calorimetry experiment and the amount of solute dissolved. Enter the mass of solute, its molar mass, the volume of the final solution, and the measured temperature change to get the molar enthalpy in kJ/mol.
Formula
The molar enthalpy of solution is calculated from the heat exchanged with the surroundings and the number of moles of solute:
ΔHsol = q / n
where:
- ΔHsol = molar enthalpy of solution (kJ/mol)
- q = heat absorbed or released by the solution (kJ)
- n = amount of solute dissolved (mol)
The heat q is measured from the temperature change of the solution:
q = msol × csol × ΔT
- msol = mass of the solution (g), approximated as the final volume (mL) × 1.00 g/mL for dilute aqueous solutions
- csol = specific heat capacity of the solution (J/(g·°C)), often taken as 4.18 J/(g·°C) for dilute aqueous solutions
- ΔT = Tfinal − Tinitial (°C)
Because the calculator uses q in kJ and n in mol, the result is in kJ/mol. The sign of ΔT determines the sign of ΔHsol.
Worked Example
Using the default values: 2.922 g of sodium chloride (NaCl, molar mass 58.44 g/mol) is dissolved in 250 mL of water. The temperature drops by 3.4 °C (ΔT = −3.4 °C). Assume the solution has a density of 1.00 g/mL and a specific heat capacity of 4.18 J/(g·°C).
Step 1: Calculate the mass of the solution.
msol = 250 mL × 1.00 g/mL = 250 g
Step 2: Calculate the heat absorbed by the solution.
q = 250 g × 4.18 J/(g·°C) × (−3.4 °C) = −3553 J = −3.553 kJ
The negative sign means the solution lost heat to the surroundings (the process is endothermic).
Step 3: Calculate the moles of solute.
n = 2.922 g / 58.44 g/mol = 0.05000 mol
Step 4: Calculate the molar enthalpy of solution.
ΔHsol = −3.553 kJ / 0.05000 mol = −71.1 kJ/mol
The calculator rounds to one decimal place, giving −71.1 kJ/mol. This is the enthalpy change per mole of NaCl when it dissolves in water under these conditions.
Assumptions
- The solution is dilute enough that its density is approximately 1.00 g/mL and its specific heat capacity is approximately 4.18 J/(g·°C).
- No heat is lost to the surroundings (perfect calorimetry).
- The solute and solvent are initially at the same temperature.
- The final solution volume equals the solvent volume (negligible volume change on dissolution).
- Pressure is constant (usually 1 atm), so q = ΔH.
What the Enthalpy of Solution Means
The enthalpy of solution is the heat change when a substance dissolves in a solvent to form an infinitely dilute solution. It is the net result of three energy terms:
- Lattice enthalpy: energy needed to break the ionic or intermolecular bonds in the solute (endothermic, positive).
- Solvation enthalpy: energy released when solvent molecules surround the solute particles (exothermic, negative).
- Mixing enthalpy: energy change from the solvent and solute particles mixing (often small).
If the solvation energy is larger than the lattice energy, the overall process is exothermic (ΔHsol < 0) and the solution warms up. If the lattice energy dominates, the process is endothermic (ΔHsol > 0) and the solution cools down. For example, dissolving sodium hydroxide in water releases heat (ΔHsol ≈ −44 kJ/mol), while dissolving ammonium nitrate absorbs heat (ΔHsol ≈ +26 kJ/mol), which is why instant cold packs use ammonium nitrate.
How to Measure It Experimentally
In a school or research lab, you measure the enthalpy of solution using a calorimeter:
- Add a known volume of solvent (usually water) to a calorimeter and record its initial temperature.
- Weigh a known mass of solute and add it quickly to the solvent.
- Stir and record the highest or lowest temperature reached.
- Calculate ΔT and use the formula above to find ΔHsol.
For accurate work, you must account for the heat capacity of the calorimeter itself (the calorimeter constant) and any heat lost to the surroundings. The simple calculation here assumes perfect insulation.
Common Mistakes and Misconceptions
- Forgetting the sign: A temperature drop (ΔT negative) means the solution absorbs heat from the water, so ΔHsol is positive (endothermic). A temperature rise gives a negative ΔHsol.
- Using solvent mass instead of solution mass: For dilute solutions, the mass of solute is small, but for concentrated solutions you must add the solute mass to the solvent mass.
- Unit mix-ups: Specific heat is often given in J/(g·°C), but enthalpy is reported in kJ/mol. Convert J to kJ by dividing by 1000.
- Confusing ΔHsol with ΔHhydration: The enthalpy of solution is the sum of lattice and hydration enthalpies. Hydration alone is not the solution enthalpy.
- Assuming all salts have the same sign: Some dissolve endothermically, others exothermically. There is no universal rule.
Factors That Affect the Enthalpy of Solution
The value of ΔHsol depends on several factors:
- Nature of the solute: Ionic compounds have lattice energies that vary with charge and ion size. Higher charge densities generally lead to larger lattice energies and more exothermic hydration.
- Nature of the solvent: Water is a polar solvent that strongly solvates ions. Nonpolar solvents have weaker solvation and often give endothermic dissolution.
- Temperature: The enthalpy of solution varies slightly with temperature, but the change is usually small over a narrow range.
- Concentration: At infinite dilution, ΔHsol reaches a limiting value. At higher concentrations, ion–ion interactions alter the heat change.
- Pressure: For solids and liquids dissolving in liquids, pressure has a negligible effect. For gases dissolving in liquids, pressure affects the concentration but not the molar enthalpy significantly.
Why It Matters
The enthalpy of solution is used in many practical contexts:
- Designing instant hot and cold packs (based on exothermic and endothermic dissolution).
- Predicting solubility: a large positive ΔHsol can make a substance less soluble, though entropy also plays a role.
- Industrial crystallization and dissolution processes where heat management is critical.
- Understanding biological processes like the dissolution of salts in bodily fluids.
For example, when you dissolve calcium chloride in water, the solution gets hot because the hydration of Ca²⁺ and Cl⁻ ions releases more energy than the lattice energy requires. This is why calcium chloride is used in de-icing and in some heating pads.
Frequently Asked Questions
Why is the enthalpy of solution sometimes positive and sometimes negative?
The sign depends on the balance between the energy required to break the solute’s lattice (endothermic) and the energy released when solvent molecules surround the solute particles (exothermic). If solvation releases more energy than lattice breaking absorbs, the overall ΔHsol is negative (exothermic). If not, it is positive (endothermic).
Does the enthalpy of solution depend on the amount of solute?
The molar enthalpy of solution is defined per mole of solute, so it is independent of the amount for a given concentration. However, the total heat absorbed or released (q) does depend on the amount. The calculator computes the molar value by dividing q by the moles of solute.
What is the difference between enthalpy of solution and enthalpy of hydration?
Enthalpy of hydration is the heat change when one mole of gaseous ions is dissolved in water to form an infinitely dilute solution. It is always exothermic. Enthalpy of solution is the heat change when one mole of solute (solid, liquid, or gas) dissolves in a solvent. For an ionic solid, ΔHsol = lattice enthalpy + hydration enthalpy.
Can I use this calculator for non-aqueous solvents?
Yes, but you must change the specific heat capacity and density to match your solvent. The default values are for dilute aqueous solutions. For organic solvents, look up the specific heat capacity and density and enter those values.
Why does my experimental value differ from the textbook value?
Textbook values are usually measured at infinite dilution and at a specific temperature (often 25 °C). Your experiment may have heat loss, incomplete dissolution, or a different final concentration. Also, the calorimeter itself absorbs heat, which the simple calculation ignores. Using a calorimeter constant improves accuracy.
Is the enthalpy of solution the same as the heat of dissolution?
Yes, they are the same thing. “Heat of dissolution” is an older term for enthalpy of solution. At constant pressure, the heat absorbed or released equals the enthalpy change.
Follow your lab method, the safety data sheet (SDS) and your supervisor when performing calorimetry experiments.
Related
Formula used
in m | Mass of solute | g | 2.922 | 0 in mm | Molar mass | g/mol | 58.44 | 0.001 in v | Final solution volume | mL | 250 | 0.001 in dt | Temperature change (T_final - T_initial) | °C | -3.4 | -100 in c | Specific heat capacity of solution | J/(g·°C) | 4.18 | 0.001 out dh | Molar enthalpy of solution | kJ/mol | (c * (v * 1.00) * dt) / 1000 / (m / mm) | 1 out q | Heat absorbed by solution | kJ | c * (v * 1.00) * dt / 1000 | 2
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- ug to ppb Calculator: Convert Micrograms per Liter1.00 ppb
- Grams to Moles Chemistry: How to Convert0.2000 mol/L
- Convert ug/l to ppb Calculator
- CPP Calculator Ontario: How CPP Is Calculated162.12 $/month
- Grams to Moles to Molecules: How to Convert0.2000 mol/L
- Organic Chemistry Reaction Calculator: How It Works