The enthalpy of combustion of petrol (gasoline) is the heat released when a given amount of fuel burns completely in oxygen. For typical commercial petrol, the higher heating value (HHV) is about 46–47 MJ/kg (megajoules per kilogram), and the lower heating value (LHV) is about 43–44 MJ/kg. The exact number depends on the fuel’s composition, which varies by season, region, and additives.
Formula
The enthalpy of combustion is defined as the change in enthalpy when one mole of a substance undergoes complete combustion with oxygen at standard conditions (usually 25 °C and 1 atm). For a fuel mixture like petrol, it is more practical to express it per unit mass (MJ/kg) or per volume (MJ/L). The energy released by a given mass is simply:
E = m × ΔHc
- E – energy released (MJ)
- m – mass of fuel (kg)
- ΔHc – enthalpy of combustion per unit mass (MJ/kg)
Because combustion of hydrocarbons produces water vapor, two values exist: the higher heating value (HHV) includes the latent heat of condensation of water vapor; the lower heating value (LHV) does not. Most engine efficiency calculations use LHV, while boiler and heating applications often use HHV. The calculator above lets you enter either value or use the typical defaults.
Worked Example
Using the default values: 1 kg of petrol with an HHV of 46.4 MJ/kg and an LHV of 43.4 MJ/kg.
Energy (HHV) = 1 kg × 46.4 MJ/kg = 46.4 MJ
Energy (LHV) = 1 kg × 43.4 MJ/kg = 43.4 MJ
To convert to kilowatt-hours (kWh), divide by 3.6 (since 1 kWh = 3.6 MJ):
43.4 MJ / 3.6 = 12.06 kWh
So burning 1 kg of petrol releases about 43–46 MJ, depending on the heating value used.
Assumptions
- Complete combustion of all fuel with no unburnt residue.
- Reference temperature of 25 °C (298 K) and pressure of 1 atm.
- Petrol is a mixture of hydrocarbons, approximated by typical values; actual composition varies.
- HHV assumes all water vapor is condensed to liquid; LHV assumes water remains as vapor.
What Determines the Enthalpy of Combustion of Petrol?
Petrol is not a single compound but a blend of hundreds of hydrocarbons, typically containing 4 to 12 carbon atoms per molecule. The main classes are alkanes (paraffins), cycloalkanes (naphthenes), alkenes (olefins), and aromatic hydrocarbons (like benzene, toluene, and xylenes). The enthalpy of combustion per gram depends on the hydrogen-to-carbon ratio: hydrogen has a higher heat of combustion per gram than carbon, so fuels with more hydrogen relative to carbon tend to have higher energy density by mass. For example, pure octane (C8H18) has an LHV of about 44.4 MJ/kg, while benzene (C6H6) has about 40.2 MJ/kg. Commercial petrol is blended to meet octane ratings and volatility specifications, which shifts the energy content slightly. Ethanol, often added as an oxygenate, has an LHV of about 26.8 MJ/kg, so petrol with 10% ethanol (E10) has a slightly lower energy content than pure gasoline.
HHV vs. LHV: Which One Should You Use?
The choice between HHV and LHV depends on the application:
- Internal combustion engines: Use LHV because the exhaust gases leave the engine as hot vapor; the latent heat of water condensation is not recovered.
- Boilers and furnaces: Use HHV if the flue gas is cooled enough to condense water vapor (condensing boilers), otherwise LHV is more realistic.
- Fuel economy calculations: Car manufacturers and regulators often use LHV to report thermal efficiency. For example, a typical modern gasoline engine has a thermal efficiency of about 25–30%, meaning only that fraction of the LHV is converted to mechanical work.
Be consistent: mixing HHV and LHV in the same calculation leads to errors of about 6–8%.
Common Misconceptions and Pitfalls
One common mistake is confusing enthalpy of combustion with energy density by volume. Petrol has a density of about 0.72–0.78 kg/L at 15 °C, so the volumetric energy density is roughly 31–34 MJ/L (LHV). Diesel, by contrast, has a higher density (about 0.83–0.85 kg/L) and an LHV of about 42.6 MJ/kg, giving about 35–36 MJ/L, which is why diesel engines often achieve better fuel economy by volume.
Another pitfall is using the enthalpy of combustion of a single component (like octane) for the whole fuel. Real petrol is a mixture; the difference can be 1–2 MJ/kg. Always use the value from the fuel supplier or a reputable standard if precision is needed.
Also, note that the enthalpy of combustion is defined at constant pressure (usually 1 atm). At high altitudes or extreme temperatures, the air density changes, but the fuel’s energy content does not; the effect on combustion efficiency is due to oxygen availability, not the fuel’s enthalpy.
Safety and Practical Considerations
When handling petrol, always follow safety guidelines: it is highly flammable and produces toxic fumes. Never use petrol near open flames or sparks. For any laboratory work involving combustion calorimetry, follow your lab method, the safety data sheet (SDS), and your supervisor. The enthalpy values provided are for typical commercial fuels; actual samples can vary, so for precise measurements, use bomb calorimetry.
Frequently Asked Questions
What is the enthalpy of combustion of petrol in kJ/mol?
Petrol is a mixture, so it does not have a single molar mass. If you take octane (C8H18) as a representative, its enthalpy of combustion is about −5,470 kJ/mol (LHV). For a typical petrol with an average molar mass of about 100 g/mol, the molar enthalpy would be roughly −4,300 to −4,700 kJ/mol, but this is an approximation because the mixture varies.
Why is the enthalpy of combustion of petrol lower than that of hydrogen?
Hydrogen has a very high mass-specific energy: its LHV is about 120 MJ/kg, almost three times that of petrol. However, hydrogen has a very low density, so its volumetric energy density is poor. Petrol’s advantage is its high energy per volume and ease of storage, not per mass.
Does adding ethanol to petrol increase or decrease its enthalpy of combustion?
Ethanol has a lower enthalpy of combustion per kilogram (about 26.8 MJ/kg) than petrol (about 43–44 MJ/kg), so adding ethanol reduces the energy content per kilogram and per liter. E10 (10% ethanol) has about 3% less energy per liter than pure gasoline, which is why fuel economy may drop slightly when using E10.
How is the enthalpy of combustion of petrol measured?
It is measured using bomb calorimetry: a known mass of fuel is burned in a sealed vessel filled with oxygen, and the heat released is determined from the temperature rise of the surrounding water. The measured value is the HHV; the LHV is calculated by subtracting the latent heat of vaporization of the water produced.
What is the difference between enthalpy of combustion and calorific value?
They are essentially the same thing, but “calorific value” is often used in engineering and fuel industries, while “enthalpy of combustion” is the thermodynamic term. Both refer to the heat released when a substance burns completely. Calorific value is usually expressed per unit mass or volume, while enthalpy of combustion is often per mole.
Related
Formula used
in m | Mass of petrol | kg | 1 | 0 in hhv | Higher heating value | MJ/kg | 46.4 | 0 in lhv | Lower heating value | MJ/kg | 43.4 | 0 out e_hhv | Energy released (HHV) | MJ | m * hhv | 2 out e_lhv | Energy released (LHV) | MJ | m * lhv | 2 out e_kwh | Energy (LHV) in kWh | kWh | m * lhv / 3.6 | 2
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- QPP Calculator Canada: How It Works & How to Use It
- PPP Calculator World Bank: How It Works & How to Use It2,000.00
- PPP Calculator: India vs USA Cost Comparison1,000.00 USD
- PPP Calculator USD to INR: How It Works2,335 INR
- PPP Calculator India vs UK: Real Cost Comparison103.63 GBP
- PPP Calculator India vs Dubai: Real Cost Comparison8,954.58 AED