Enthalpy of hydration (ΔHhyd) is the energy change when one mole of gaseous ions dissolves in water to form an infinitely dilute solution. It is always exothermic (negative) because ion–water attractions release energy. This page explains how to define, measure, and use ΔHhyd in Born–Haber cycles and lattice enthalpy calculations.
Formula
The enthalpy of hydration of a cation is found from the lattice enthalpy (ΔHlat) and the enthalpy of hydration of the anion using:
ΔHhyd(cation) = ΔHlat − ΔHhyd(anion)
where:
- ΔHlat = lattice enthalpy of the ionic compound (kJ/mol, negative for exothermic formation from gaseous ions)
- ΔHhyd(anion) = enthalpy of hydration of the anion (kJ/mol, negative)
- ΔHhyd(cation) = enthalpy of hydration of the cation (kJ/mol, negative)
This works because lattice enthalpy and the sum of hydration enthalpies form a Born–Haber cycle: the energy to separate the solid into gaseous ions equals the energy released when those ions are hydrated.
Worked Example
Using the default values for sodium chloride:
Lattice enthalpy of NaCl = −2877 kJ/mol (this is the value for the formation of gaseous Na⁺ and Cl⁻ from the solid, so it is negative).
Enthalpy of hydration of Cl⁻ = −364 kJ/mol.
ΔHhyd(Na⁺) = −2877 − (−364) = −2513 kJ/mol
The calculator gives −2513 kJ/mol, which matches the literature value for Na⁺ hydration.
Assumptions
- The solution is infinitely dilute, so ion–ion interactions are negligible.
- The gaseous ions are in their standard states (isolated, non-interacting).
- Lattice enthalpy is defined as the formation of gaseous ions from the solid (endothermic positive), but the calculator uses the negative value for the reverse process to match the Born–Haber cycle convention.
- All values are at 298 K and 1 atm.
Why Enthalpy of Hydration Matters
Enthalpy of hydration explains why ionic compounds dissolve, why some salts feel cold or hot when dissolved, and how lattice enthalpy trends affect solubility. It is also a key term in Born–Haber cycles, which are used to calculate lattice enthalpies that cannot be measured directly.
For example, when NaCl dissolves, the energy needed to break the lattice (−ΔHlat = +787 kJ/mol) is less than the energy released by hydrating Na⁺ (−406 kJ/mol) and Cl⁻ (−364 kJ/mol), so the overall enthalpy of solution is slightly endothermic (+17 kJ/mol). This is why NaCl dissolves but the solution cools slightly.
Factors Affecting Enthalpy of Hydration
Two main factors control the magnitude of ΔHhyd:
- Charge density – the higher the charge and the smaller the ionic radius, the stronger the ion–water attraction, so more energy is released. For example, Mg²⁺ (small, +2) has a much more exothermic hydration than Na⁺ (larger, +1).
- Ionic radius – for ions of the same charge, smaller ions have higher charge density and therefore more exothermic hydration. Li⁺ has a more negative ΔHhyd than Cs⁺.
This trend explains why lattice enthalpies and hydration enthalpies both become less exothermic down a group, but not at the same rate. The difference between them determines solubility.
Common Mistakes and Misconceptions
- Sign confusion – hydration is always exothermic for ions, but lattice enthalpy can be defined as endothermic (formation from ions) or exothermic (reverse). Always check the convention in your exam board.
- Using the wrong units – enthalpy values are usually given in kJ/mol, but some data tables list them in J/mol. Convert before calculating.
- Forgetting the anion – in a Born–Haber cycle for an ionic compound, you must include hydration of both the cation and the anion, not just the cation.
- Confusing hydration with solvation – hydration specifically refers to water as the solvent. Solvation is the general term for any solvent.
Enthalpy of Hydration vs. Enthalpy of Solution
Enthalpy of solution (ΔHsol) is the energy change when one mole of solute dissolves in enough solvent to give an infinitely dilute solution. It is related to hydration by:
ΔHsol = −ΔHlat + ΔHhyd(cation) + ΔHhyd(anion)
If the hydration energy is greater than the lattice energy (in magnitude), the solution process is exothermic (e.g., LiCl). If lattice energy dominates, it is endothermic (e.g., NaCl). This is why some salts dissolve with a temperature rise and others with a drop.
Experimental Determination
Enthalpy of hydration cannot be measured directly because you cannot add a single gaseous ion to water. Instead, it is calculated from a Born–Haber cycle using measurable quantities:
- Enthalpy of formation of the ionic compound (measured by calorimetry)
- Lattice enthalpy (calculated from the cycle)
- Enthalpy of hydration of the anion (often estimated from theoretical models or measured for a known salt)
For example, to find ΔHhyd of Na⁺, you measure the enthalpy of solution of NaCl, then use the known lattice enthalpy and the hydration enthalpy of Cl⁻. The calculator above does this arithmetic for you.
Frequently Asked Questions
Is enthalpy of hydration always negative? Yes, for ions it is always exothermic because ion–dipole attractions release energy. The only exception would be a hypothetical ion that repels water, but that does not occur for real ions.
Why does Mg²⁺ have a more negative hydration enthalpy than Na⁺? Mg²⁺ has a higher charge (+2 vs +1) and a smaller ionic radius, so it attracts water molecules more strongly. The charge density is much higher, leading to stronger ion–dipole bonds and more energy released.
What is the difference between hydration enthalpy and lattice enthalpy? Lattice enthalpy is the energy to separate one mole of solid into gaseous ions (or the reverse). Hydration enthalpy is the energy when gaseous ions become hydrated in solution. They are opposite steps in the Born–Haber cycle for dissolution.
How do I calculate enthalpy of hydration from a Born–Haber cycle? Draw the cycle with the formation of the solid from elements, then the atomization and ionization steps, then lattice formation. The hydration step is the final one: add the hydration of the cation and anion. Use Hess’s law to find the unknown value.
Does temperature affect enthalpy of hydration? Yes, enthalpy values change slightly with temperature because heat capacities of ions and water differ. Standard values are quoted at 298 K. For A-level purposes, the change is usually ignored.
Why is the hydration enthalpy of F⁻ less exothermic than Cl⁻? Actually, F⁻ has a more exothermic hydration than Cl⁻ because it is smaller and has a higher charge density. The smaller ion attracts water molecules more strongly. The opposite is true for lattice enthalpies, which is why LiF is less soluble than LiCl.
Related
Formula used
in q | Lattice enthalpy (kJ/mol) | kJ/mol | -2877 | -5000 in h | Enthalpy of hydration of anion (kJ/mol) | kJ/mol | -364 | -1000 out x | Enthalpy of hydration of cation (kJ/mol) | kJ/mol | q - h | 0
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Normality to g/L Converter & Formula29.220 g/L
- Normality to meq/mL Conversion Calculator1.0000 meq/mL
- Normality Test Q-Q Plot: How to Read It
- Normality Test Results: How to Analyze Them
- Normality Slay the Spire?
- Normality Test for Paired t Test: How to Check