The enthalpy of solution (ΔHsol) is the heat absorbed or released when one mole of a solute dissolves in a solvent at constant pressure. To use it, you enter the mass of solute, its molar mass, the final solution volume, and the temperature change (or you can calculate the molar enthalpy from measured heat). This page explains what ΔHsol means, how to calculate it, and how to interpret the sign and magnitude.
Formula
The molar enthalpy of solution is defined as:
ΔHsol = q / n
where:
- q = heat absorbed or released by the solution (in joules, J). For a constant-pressure calorimeter, q = msol × cp × ΔT, where msol is the total mass of the solution (solute + solvent), cp is the specific heat capacity of the solution (J·g−1·K−1), and ΔT is the temperature change (K or °C).
- n = amount of solute dissolved (in moles), n = m / M, where m is the mass of solute (g) and M is its molar mass (g/mol).
The calculator above computes the molarity of the resulting solution, which is often needed when you want to express ΔHsol per mole of solute in a specific volume. To get ΔHsol itself, you need the measured temperature change and the solution’s mass and specific heat.
Worked Example
Suppose you dissolve 2.922 g of sodium chloride (NaCl, molar mass 58.44 g/mol) in enough water to make 250.0 mL of solution. Using the calculator:
- Moles of NaCl: n = 2.922 g / 58.44 g/mol = 0.05000 mol.
- Volume in liters: 250.0 mL / 1000 = 0.2500 L.
- Molarity: c = 0.05000 mol / 0.2500 L = 0.2000 mol/L.
The calculator shows 0.2000 mol/L (and 200.0 mM). Now, if dissolving that 2.922 g in 250 mL of water caused the temperature to drop by 0.35 °C, and the solution has a mass of about 252.9 g (assuming density ≈ 1.00 g/mL) and a specific heat of 4.18 J·g−1·K−1, the heat absorbed is:
q = 252.9 g × 4.18 J·g−1·K−1 × 0.35 K = 370 J (endothermic, so q is positive for the system).
Molar enthalpy: ΔHsol = 370 J / 0.05000 mol = 7400 J/mol = +7.4 kJ/mol.
This matches the known endothermic dissolution of NaCl (about +3.9 kJ/mol at infinite dilution; the value here is higher because of the concentration and measurement approximations).
Assumptions
- The solution is dilute enough that the specific heat capacity is close to that of pure water (4.18 J·g−1·K−1).
- The density of the solution is approximately 1.00 g/mL for dilute aqueous solutions.
- The calorimeter absorbs negligible heat (or its heat capacity is accounted for).
- The process occurs at constant pressure, so q = ΔH.
Why Enthalpy of Solution Matters
The enthalpy of solution tells you whether dissolving a substance in a given solvent releases heat (exothermic, ΔHsol < 0) or absorbs heat (endothermic, ΔHsol > 0). This is crucial in many practical situations:
- Preparing solutions in the lab: Some solutes, like sodium hydroxide (NaOH) or sulfuric acid (H2SO4), release a large amount of heat when dissolved. Adding water to concentrated acid can cause violent boiling; always add acid to water slowly with stirring.
- Cold packs: Endothermic dissolutions (like ammonium nitrate in water) absorb heat, which is why instant cold packs feel cold.
- Understanding solubility: The sign and magnitude of ΔHsol help predict how solubility changes with temperature. For most solids, solubility increases with temperature if dissolution is endothermic (Le Chatelier’s principle).
- Industrial processes: Many chemical manufacturing steps involve dissolving solids; managing the heat release is essential for safety and efficiency.
How to Measure ΔHsol in the Lab
The most common method is constant-pressure calorimetry:
- Place a known mass of solvent (usually water) in an insulated container (a coffee-cup calorimeter).
- Record the initial temperature.
- Add a known mass of solute and stir rapidly.
- Record the highest or lowest temperature reached.
- Calculate q using q = msol × cp × ΔT (where msol is the total mass of the solution).
- Divide q by the number of moles of solute to get ΔHsol.
Remember that q is the heat absorbed by the solution. If the solution gets hotter (ΔT positive), the process is exothermic, so ΔHsol is negative (heat is released by the solute-solvent system). If the solution cools, ΔHsol is positive.
Common Mistakes and Pitfalls
- Forgetting the sign: A temperature increase means the solution gained heat, so the dissolution is exothermic (ΔHsol < 0). A temperature decrease means ΔHsol > 0.
- Using the wrong mass: q uses the total mass of the solution (solute + solvent), not just the solvent. For dilute solutions, the solute mass is often small, but it matters for accuracy.
- Ignoring the calorimeter’s heat capacity: If the calorimeter absorbs heat, you need to include its heat capacity in q. For a simple coffee-cup calorimeter, this is often negligible but can be significant for metal vessels.
- Mixing up units: Ensure mass is in grams, specific heat in J·g−1·K−1, and temperature change in kelvin (a change of 1 °C = 1 K).
- Not accounting for the enthalpy of dilution: ΔHsol depends on the final concentration. The value at infinite dilution (ΔHsol° ) is the standard reference; at higher concentrations, the value may differ slightly due to ion-ion interactions.
Factors That Affect the Enthalpy of Solution
The overall ΔHsol is the sum of several energy terms:
- Lattice enthalpy (endothermic): Energy required to break the ionic or molecular lattice of the solute.
- Solvation enthalpy (exothermic): Energy released when solute particles are surrounded by solvent molecules (hydration for water).
- Mixing enthalpy: For non-ideal solutions, there may be an additional heat effect due to intermolecular interactions between solute and solvent.
If the solvation energy exceeds the lattice energy, dissolution is exothermic; if not, it is endothermic. For example, NaOH has a very exothermic dissolution because the hydration of Na+ and OH− releases a lot of energy. In contrast, NH4NO3 absorbs heat because its lattice energy is relatively high.
Frequently Asked Questions
What is the difference between enthalpy of solution and enthalpy of hydration?
Enthalpy of solution (ΔHsol) is the overall heat change when a solute dissolves in a solvent. Enthalpy of hydration (ΔHhyd) is specifically the heat change when gaseous ions are surrounded by water molecules. The relationship is: ΔHsol = −ΔHlattice + ΔHhyd (for ionic compounds).
Why is dissolving sodium hydroxide in water exothermic?
When NaOH dissolves, the energy released by hydrating Na+ and OH− ions is greater than the energy required to break the ionic lattice. The net effect is a release of heat, making the solution warm. This is why you must handle NaOH carefully—the heat can cause splattering.
Does the enthalpy of solution depend on temperature?
Yes, but the variation is usually small over a modest temperature range. The standard enthalpy of solution is defined at 25 °C and 1 bar. At other temperatures, you can correct using heat capacities, but for most practical purposes, the change is negligible unless you are working at extreme temperatures.
How do I calculate the enthalpy of solution from a calorimetry experiment?
Measure the temperature change (ΔT) of a known mass of solution (msol) after adding a known mass of solute. Calculate q = msol × cp × ΔT. Then divide q by the number of moles of solute (n = mass / molar mass). The sign of ΔT tells you whether it is exothermic (negative) or endothermic (positive).
Can the enthalpy of solution be zero?
Yes, some solutes dissolve with very little heat change. For example, dissolving sodium chloride in water at very dilute concentrations is nearly athermal (ΔHsol ≈ 0) because the lattice energy and hydration energy almost cancel. In practice, you might see a tiny temperature change that is hard to measure.
Why do I need to know the molarity of the solution when studying enthalpy of solution?
Molarity helps define the final concentration, which affects the enthalpy of solution. The standard enthalpy of solution is typically reported at infinite dilution, but at finite concentrations, ion-ion interactions can alter the value. Knowing the molarity allows you to compare results with literature values or to correct for concentration effects.
Safety and Practical Notes
When performing dissolution experiments, always follow your lab method, the safety data sheet (SDS) and your supervisor. Some dissolutions are strongly exothermic (e.g., NaOH, H2SO4) and can cause burns or boiling; add solute slowly to solvent with stirring. For endothermic dissolutions, the solution can get very cold; handle containers with care to avoid frostbite. Always wear appropriate personal protective equipment (goggles, gloves, lab coat).
Related
Formula used
in m | Mass of solute | g | 2.922 | 0 in mm | Molar mass | g/mol | 58.44 | 0.001 in v | Final solution volume | mL | 250 | 0.001 out c | Molarity | mol/L | m / mm / (v / 1000) | 4 out cmm | Concentration in millimolar | mM | c * 1000 | 2
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- ug to ppb Calculator: Convert Micrograms per Liter1.00 ppb
- Grams to Moles Chemistry: How to Convert0.2000 mol/L
- Convert ug/l to ppb Calculator
- CPP Calculator Ontario: How CPP Is Calculated162.12 $/month
- Grams to Moles to Molecules: How to Convert0.2000 mol/L
- Organic Chemistry Reaction Calculator: How It Works