molecalculator

Moles & Molar Mass

Equation of a Normal: Formula & Examples

Calculator No. 01-8030 · Updated · Formula and assumptions shown below

Slope of normal -0.5000
Equation of normal (y = nx + b)
3.5000
= y-coordinate of point − Slope of normal × x-coordinate of point
Slope of tangent at point
2
Set in the form below
x-coordinate of point
1
Set in the form below
You enter
Slope of tangent at point, x-coordinate of point, y-coordinate of point
You get
Slope of normal, Equation of normal (y = nx + b)
Rounding
4 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

The equation of a normal line to a curve at a given point is found using the slope of the tangent at that point. If the tangent slope is m, the normal slope is −1/m, and the line equation is y − y₀ = (−1/m)(x − x₀). This article explains the formula, how to derive it, and works through concrete examples.

Formula

For a curve y = f(x), the slope of the tangent at a point (x₀, y₀) is the derivative f′(x₀). The normal line is perpendicular to the tangent, so its slope mn is the negative reciprocal:

mn = −1 / f′(x₀)

The point-slope form of the normal line is:

y − y₀ = mn(x − x₀)

If you expand this, you get the slope-intercept form y = mnx + b, where b = y₀ − mnx₀. The calculator above takes the tangent slope m (which you compute from the derivative) and the point coordinates, then gives the normal slope and the full equation.

Worked Example

Find the equation of the normal to the curve y = x² at the point (1, 3). Wait—check: y = 1² = 1, not 3. Let’s use a correct point: y = x² at x = 1 gives y = 1. So the point is (1, 1).

Step 1: Compute the derivative. f′(x) = 2x. At x = 1, f′(1) = 2. So the tangent slope m = 2.

Step 2: Normal slope mn = −1/2 = −0.5.

Step 3: Use point-slope form with (1, 1): y − 1 = −0.5(x − 1).

Step 4: Simplify: y = −0.5x + 0.5 + 1 = −0.5x + 1.5.

Check with the calculator defaults: m = 2, x0 = 1, y0 = 1 (but the default y0 is 3, so let’s use the correct values). If you enter m = 2, x0 = 1, y0 = 1, the normal slope is −0.5 and the intercept is 1 − (−0.5)(1) = 1.5, giving y = −0.5x + 1.5. The calculator’s default y0 = 3 is just a placeholder; you must enter the actual point on the curve.

Assumptions

  • The curve is differentiable at the point—the tangent exists and is not vertical.
  • The tangent slope is finite and nonzero. If m = 0, the normal is vertical (equation x = x₀).
  • The point (x₀, y₀) lies on the curve.

How to Find the Normal: Step-by-Step

  1. Differentiate the function to get f′(x).
  2. Plug the x-coordinate of the point into f′(x) to get the tangent slope m.
  3. Compute the normal slope as −1/m.
  4. Write the line equation using the point and the normal slope.
  5. Simplify to the desired form (slope-intercept or standard).

Common Mistakes and Misconceptions

A frequent error is forgetting to take the negative reciprocal—some students just take the reciprocal or just negate the slope. Another is using the original function value instead of the derivative. For example, for y = sin(x) at x = π/2, the derivative is cos(π/2) = 0, so the tangent is horizontal and the normal is vertical. Many textbooks also ask for the normal to a curve given implicitly, like x² + y² = 25; there you use implicit differentiation to find dy/dx.

Another misconception: the normal is not the same as the tangent line’s perpendicular bisector. The normal is simply the line perpendicular to the tangent at the point of contact—it passes through that point, not necessarily through any midpoint.

When to Use the Normal Line

The normal line is used in physics (e.g., reflection and refraction—Snell’s law uses the normal to a surface), in optimization problems where you need the shortest distance from a point to a curve, and in computer graphics for surface shading. In geometry, the normal to a circle at a point passes through the center. In calculus, finding the normal is a standard exercise that tests your understanding of derivatives and perpendicular slopes.

Special Cases

  • Horizontal tangent (m = 0): Normal is vertical, equation x = x₀.
  • Vertical tangent: Normal is horizontal, equation y = y₀.
  • Constant function: Tangent slope is 0 everywhere, so normal is vertical.
  • Linear function: The “normal” is the perpendicular line to the given line.

Frequently Asked Questions

What is the difference between tangent and normal?

The tangent line touches the curve at a point and has the same slope as the curve at that point. The normal line is perpendicular to the tangent at that same point. They intersect at the point of tangency.

How do I find the normal without a calculator?

Follow the steps: differentiate, evaluate at the x-coordinate, take the negative reciprocal, then use point-slope form. For example, for y = x³ at (1,1), derivative is 3x², at x=1 gives 3, normal slope is −1/3, equation y−1 = −1/3(x−1).

What if the tangent slope is zero?

Then the normal is a vertical line. The equation is simply x = x₀. You cannot compute −1/0, so treat it as a special case.

Can the normal line be horizontal?

Yes, if the tangent is vertical. That happens when the derivative is undefined (e.g., at a cusp) or infinite. In that case, the normal has slope 0 and equation y = y₀.

Does the normal always pass through the origin?

No. Only for a circle centered at the origin does the normal pass through the origin. For a general curve, the normal passes through the point of tangency, not necessarily the origin.

Why is the normal slope the negative reciprocal?

Two lines are perpendicular if the product of their slopes is −1 (provided neither is vertical). So if the tangent slope is m, the normal slope mn satisfies m × mn = −1, giving mn = −1/m.

Related

Formula used
in m | Slope of tangent at point | - | 2 | -1000 | 1000
in x0 | x-coordinate of point | - | 1 | -1000000 | 1000000
in y0 | y-coordinate of point | - | 3 | -1000000 | 1000000
out n | Slope of normal | - | -1 / m | 4
out eq | Equation of normal (y = nx + b) | - | y0 - n * x0 | 4

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →