The molar mass of ethylene glycol (ethanediol, formula C2H6O2) is 62.068 g/mol. This is the mass of one mole of the pure compound, calculated by adding the atomic weights of 2 carbon atoms, 6 hydrogen atoms, and 2 oxygen atoms. The calculator below lets you convert between the mass of ethylene glycol and the number of moles (or millimoles) you have, which is the first step in preparing solutions of known concentration.
Formula
The molar mass (M) of a compound is the sum of the atomic weights of each element multiplied by the number of atoms of that element in the molecular formula:
M(C2H6O2) = 2 × Ar(C) + 6 × Ar(H) + 2 × Ar(O)
Where:
- Ar(C) = 12.011 g/mol (carbon)
- Ar(H) = 1.008 g/mol (hydrogen)
- Ar(O) = 15.999 g/mol (oxygen)
Plugging in the numbers: 2 × 12.011 + 6 × 1.008 + 2 × 15.999 = 24.022 + 6.048 + 31.998 = 62.068 g/mol. This is the value used in the calculator above.
Worked Example
Suppose you weigh out 62.068 g of pure ethylene glycol (exactly one mole) and dissolve it in enough water to make 1000 mL of final solution.
Step 1 – Moles of ethylene glycol:
n = m / M = 62.068 g / 62.068 g/mol = 1.000 mol
Step 2 – Molarity (concentration):
c = n / V (in liters) = 1.000 mol / (1000 mL / 1000) = 1.000 mol/L = 1.000 M
Step 3 – Millimoles (if you prefer smaller units):
mmol = n × 1000 = 1.000 × 1000 = 1000.00 mmol
The calculator returns the same values: 1.000 mol, 1.0000 mol/L, and 1000.00 mmol.
Assumptions
- The molar mass is based on the IUPAC standard atomic weights (abridged) for the elements.
- The compound is pure ethylene glycol (no water or other impurities).
- When preparing a solution, the final volume is used, not the volume of solvent added. This is the standard convention for molarity.
- The density of the solution is not needed for the molarity calculation—only the mass of solute and final volume matter.
Why the Molar Mass Matters in Practice
Ethylene glycol is a common laboratory chemical and the main ingredient in many automotive antifreeze and coolant products. In the lab, you might need to prepare a specific molar concentration for a reaction, a freezing-point depression experiment, or a calibration standard. Knowing the molar mass lets you convert between the mass you weigh out and the amount of substance (moles) you actually have.
For example, to make 500 mL of a 2.0 M aqueous ethylene glycol solution, you would need:
mass = M × V × molar mass = 2.0 mol/L × 0.500 L × 62.068 g/mol = 62.07 g of ethylene glycol, dissolved and diluted to a final volume of 500 mL.
This calculation is exactly what the calculator above does, but with your chosen mass and volume.
Common Mistakes and Misconceptions
One frequent error is confusing ethylene glycol with propylene glycol (1,2-propanediol, C3H8O2). Propylene glycol has a molar mass of 76.094 g/mol—about 14 g/mol higher. Using the wrong molar mass will throw off any stoichiometric calculation by roughly 20%.
Another common mistake is using the volume of solvent instead of the final solution volume. When you dissolve a solid in water, the total volume increases slightly. Molarity is always defined as moles of solute per liter of final solution, not per liter of solvent added. Always dissolve the solute in a portion of solvent, then bring the volume up to the mark in a volumetric flask.
Also, be careful with units. If you enter the mass in kilograms instead of grams, the calculator will give a result that is 1000 times too large. Always check that your mass is in grams and your volume is in milliliters (or convert to liters) before using the formula.
How to Use the Calculator
Using the calculator is straightforward:
- Enter the mass of ethylene glycol you have in grams (e.g., 62.068 g).
- Enter the molar mass (default is 62.068 g/mol, but you can change it if you are working with a different glycol).
- Enter the final volume of the solution in milliliters (e.g., 1000 mL).
- Read the moles, molarity, and millimoles from the outputs.
The calculator is designed for study and lab-planning arithmetic—it is not a substitute for following your laboratory’s standard operating procedures and safety data sheets (SDS). Always wear appropriate personal protective equipment when handling chemicals.
Safety and Handling Notes
Pure ethylene glycol is a viscous, sweet-tasting liquid that is toxic if ingested. It is also mildly irritating to skin and eyes. In the lab, always work in a well-ventilated area, wear gloves and safety goggles, and follow your institution’s chemical hygiene plan. Do not use ethylene glycol in food or cosmetic products. If you spill it, clean up promptly and dispose of the waste according to local regulations.
If you are working with antifreeze products, note that they often contain additives (corrosion inhibitors, dyes) that change the density and may affect your calculations if you assume the product is pure ethylene glycol. For accurate molarity, use the pure compound or verify the product’s composition.
Frequently Asked Questions
Is ethylene glycol the same as ethanol?
No. Ethanol (C2H5OH) is a simple alcohol with a molar mass of 46.07 g/mol. Ethylene glycol has two hydroxyl groups (a diol) and a molar mass of 62.07 g/mol. They are different compounds with different properties and uses.
How do I convert from molarity to percent by mass?
You need the density of the solution. Percent by mass = (mass of solute / mass of solution) × 100. First calculate the mass of solute from molarity and volume (mass = M × V × molar mass), then divide by the total mass of the solution (density × volume). The density is not a constant—it depends on concentration and temperature.
Why is the molar mass sometimes listed as 62.07 and sometimes 62.068?
The difference is rounding. The IUPAC atomic weights are averages that reflect natural isotopic abundances. Using 12.01, 1.01, and 16.00 gives 62.07 g/mol; using more precise values (12.011, 1.008, 15.999) gives 62.068 g/mol. Both are acceptable, but 62.068 is more accurate.
Can I use this calculator for propylene glycol?
Yes, but you must change the molar mass to 76.094 g/mol. The calculator is generic—it works for any solute as long as you enter the correct molar mass.
What is the freezing point depression constant for ethylene glycol?
For water as the solvent, the cryoscopic constant (Kf) is 1.86 °C·kg/mol. The freezing point depression is ΔTf = i × Kf × m, where m is the molality (moles of solute per kg of solvent) and i is the van’t Hoff factor (i = 1 for ethylene glycol, since it does not dissociate). This is a separate calculation from molarity.
How many grams are in one mole of ethylene glycol?
Exactly the molar mass: 62.068 grams. One mole of any substance contains 6.022 × 1023 molecules (Avogadro’s number), so 62.068 g of ethylene glycol contains that many molecules.
Related
Formula used
in m | Mass of solute | g | 62.068 | 0 in mm | Molar mass | g/mol | 62.068 | 0.001 in v | Final solution volume | mL | 1000 | 0.001 out n | Moles of solute | mol | m / mm | 4 out c | Molarity | mol/L | (m / mm) / (v / 1000) | 4 out mmmol | Millimoles | mmol | (m / mm) * 1000 | 2
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- ug to ppb Calculator: Convert Micrograms per Liter1.00 ppb
- Grams to Moles Chemistry: How to Convert0.2000 mol/L
- Convert ug/l to ppb Calculator
- CPP Calculator Ontario: How CPP Is Calculated162.12 $/month
- Grams to Moles to Molecules: How to Convert0.2000 mol/L
- Organic Chemistry Reaction Calculator: How It Works