molecalculator

Moles & Molar Mass

Fahrenheit to Kelvin Formula & Conversion Steps

Calculator No. 01-8786 · Updated · Formula and assumptions shown below

Temperature in kelvin 310.15 K
Temperature in °C
37.00 °C
= (Temperature in °F − 32) × 5 ÷ 9
Temperature in °F
98.6 °F
Set in the form below
You enter
Temperature in °F (°F)
You get
Temperature in kelvin (K), Temperature in °C (°C)
Rounding
2 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

The formula to convert Fahrenheit to Kelvin is K = (°F − 32) × 5/9 + 273.15. You subtract 32 from the Fahrenheit temperature, multiply by 5/9 to get Celsius, then add 273.15 to shift from Celsius to the Kelvin scale. This gives the absolute temperature in kelvins (K), the SI base unit of thermodynamic temperature.

Formula

The conversion uses two well-known relationships:

  • Celsius to Fahrenheit: °C = (°F − 32) × 5/9
  • Kelvin to Celsius: K = °C + 273.15

Combining them gives the direct Fahrenheit-to-Kelvin equation:

K = (°F − 32) × 5/9 + 273.15

where:

  • K = temperature in kelvins (unit: K)
  • °F = temperature in degrees Fahrenheit (unit: °F)
  • 273.15 = the offset between the Celsius and Kelvin scales (exact by definition since 1954)
  • 5/9 = the ratio of the size of one degree Fahrenheit to one kelvin (or one degree Celsius)

Note that kelvins are not written with a degree sign; the unit is simply “K” (e.g., 310.15 K, not 310.15°K).

Worked Example

Convert normal human body temperature, 98.6 °F, to kelvins using the default values in the calculator.

  1. Start with the Fahrenheit value: 98.6 °F.
  2. Subtract 32: 98.6 − 32 = 66.6.
  3. Multiply by 5/9: 66.6 × 5/9 = 37.0 °C (exactly, because 66.6 × 5 = 333, and 333 ÷ 9 = 37).
  4. Add 273.15: 37.0 + 273.15 = 310.15 K.

So 98.6 °F = 310.15 K. The calculator shows this as the headline answer with two decimal places.

Assumptions

  • The conversion assumes the standard, exact relationship between the Fahrenheit, Celsius, and Kelvin scales.
  • 273.15 is the exact offset defined by the International System of Units (SI) for the triple point of water (273.16 K) and the 0.01 °C difference.
  • No rounding is applied to the conversion factors themselves; 5/9 is exact, and 273.15 is exact.

Why the Fahrenheit Scale Exists

Daniel Gabriel Fahrenheit proposed his scale in 1724. He set 0 °F as the coldest temperature he could achieve with a salt–ice mixture and 96 °F as human body temperature (later recalibrated). The scale became standard in English-speaking countries for everyday use, and it remains the official scale for weather and household temperatures in the United States and a few other territories.

Kelvin, by contrast, is an absolute thermodynamic scale. Its zero point, 0 K, is absolute zero — the theoretical temperature at which particles have minimal thermal motion. The kelvin unit is defined by fixing the Boltzmann constant, and one kelvin equals exactly 1/273.16 of the triple-point temperature of water. Because it is an absolute scale, temperatures in kelvins are never negative.

How the Conversion Works Step by Step

The conversion is a two-stage process, even when you use the combined formula:

  1. Convert Fahrenheit to Celsius. The Fahrenheit scale places the freezing point of water at 32 °F and the boiling point at 212 °F, a 180-degree span. Celsius places these at 0 °C and 100 °C, a 100-degree span. The ratio of the spans is 180/100 = 9/5, so a Celsius degree is larger than a Fahrenheit degree. To go from Fahrenheit to Celsius, you first remove the 32-degree offset, then scale by 5/9.
  2. Convert Celsius to Kelvin. The Kelvin scale uses the same degree size as Celsius, but its zero is shifted to absolute zero. The offset is exactly 273.15 K, so you simply add 273.15 to the Celsius value.

The combined formula does both steps in one line. If you prefer, you can do them separately — the result is identical.

Common Mistakes and How to Avoid Them

  • Forgetting the 32 offset. Multiplying °F by 5/9 without subtracting 32 first gives a wildly wrong answer (e.g., 98.6 × 5/9 = 54.78, which is not 37 °C). Always subtract 32 before multiplying.
  • Using 273 instead of 273.15. For most everyday purposes, 273 is close enough (it gives 310 K for body temperature), but for precise scientific work, use 273.15. The difference is 0.15 K, which matters in thermodynamics.
  • Writing “°K”. The kelvin is not a degree scale; it is an absolute unit. Write “K” or “kelvins,” not “°K.”
  • Confusing the direction. To convert Kelvin to Fahrenheit, you reverse the steps: subtract 273.15 to get Celsius, then multiply by 9/5 and add 32. The formula is °F = (K − 273.15) × 9/5 + 32.
  • Rounding too early. If you round the Celsius intermediate to one decimal before adding 273.15, you can lose precision. Keep extra digits until the final step.

When to Use Fahrenheit-to-Kelvin Conversion

You need this conversion when working with scientific data reported in Fahrenheit but calculations require absolute temperatures. Common situations include:

  • Gas law problems (e.g., the ideal gas law PV = nRT), where T must be in kelvins.
  • Thermodynamic equations involving entropy, enthalpy, or the Boltzmann distribution.
  • Converting historical temperature data from U.S. sources (weather records, engineering specs) into SI units.
  • International scientific collaboration, where kelvin is the standard unit.

If you only need to compare everyday temperatures (like weather), converting Fahrenheit to Celsius is simpler. But any time a formula uses temperature in an absolute sense — such as in gas laws or radiation calculations — you must use kelvins.

Alternatives and Related Conversions

If you frequently work with temperature, you may also need these conversions:

  • Celsius to Kelvin: K = °C + 273.15
  • Kelvin to Celsius: °C = K − 273.15
  • Fahrenheit to Celsius: °C = (°F − 32) × 5/9
  • Celsius to Fahrenheit: °F = (°C × 9/5) + 32
  • Rankine to Kelvin: K = °R × 5/9 (Rankine is an absolute Fahrenheit-based scale)

For quick mental estimates, remember that a change of 1 K equals a change of 1 °C, and a change of 1 °F equals 5/9 K. So a 9 °F change is the same as a 5 K change.

Frequently Asked Questions

What is absolute zero in Fahrenheit?

Absolute zero is −459.67 °F. Using the formula, (−459.67 − 32) × 5/9 + 273.15 = 0 K exactly.

Why do we add 273.15 instead of 273?

273.15 is the exact offset between the Celsius and Kelvin scales, based on the triple point of water (273.16 K) and the fact that the triple point is 0.01 °C. Using 273 gives a close approximation for casual use, but 273.15 is the correct value for precise scientific work.

Can kelvins be negative?

No. The Kelvin scale is absolute, and 0 K is the lowest possible temperature. Negative kelvins are not physically meaningful in everyday thermodynamics (though exotic systems can have negative temperatures in a statistical sense, that is a different concept).

What is room temperature in kelvins?

Typical room temperature is about 20–25 °C, which is 293.15–298.15 K. The calculator’s default of 98.6 °F is body temperature, but you can enter any value.

How do I convert kelvins to Fahrenheit?

Use the reverse formula: °F = (K − 273.15) × 9/5 + 32. For example, 310.15 K gives (310.15 − 273.15) × 1.8 + 32 = 98.6 °F.

Is there a difference between a kelvin and a degree Celsius?

They are the same size — a change of 1 K equals a change of 1 °C — but they have different zero points. The Celsius scale sets 0 °C at the freezing point of water, while the Kelvin scale sets 0 K at absolute zero.

Related

Formula used
in f | Temperature in °F | °F | 98.6 | -459.67
out k | Temperature in kelvin | K | (f - 32) * 5 / 9 + 273.15 | 2
out c | Temperature in °C | °C | (f - 32) * 5 / 9 | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →