molecalculator

Moles & Molar Mass

Fahrenheit to Kelvin Formula: Convert °F to K

Calculator No. 01-8785 · Updated · Formula and assumptions shown below

Temperature in kelvin 310.15 K
Temperature in °C
37.00 °C
= (Temperature in °F − 32) × 5 ÷ 9
Temperature in °F
98.6 °F
Set in the form below
You enter
Temperature in °F (°F)
You get
Temperature in kelvin (K), Temperature in °C (°C)
Rounding
2 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

The Fahrenheit to Kelvin formula is K = (°F − 32) × 5/9 + 273.15. To convert a temperature from Fahrenheit, subtract 32, multiply by 5/9, then add 273.15; the result is the temperature in kelvin (K).

Formula

The conversion uses two well-known steps. First, Fahrenheit to Celsius: °C = (°F − 32) × 5/9. Then Celsius to kelvin: K = °C + 273.15. Combining them gives the single formula:

K = (°F − 32) × 5/9 + 273.15

  • °F – the temperature in degrees Fahrenheit (input, °F)
  • K – the temperature in kelvin (output, K)
  • 273.15 – the exact offset between the Celsius and kelvin scales (K)

The factor 5/9 is the ratio of the size of one degree Fahrenheit to one kelvin (or one degree Celsius). Because the kelvin scale starts at absolute zero (−273.15 °C), you add 273.15 after converting to Celsius.

Worked Example

Convert 98.6 °F (normal human body temperature) to kelvin.

  1. Subtract 32: 98.6 − 32 = 66.6
  2. Multiply by 5/9: 66.6 × 5/9 = 37.0
  3. Add 273.15: 37.0 + 273.15 = 310.15 K

The calculator gives 310.15 K (rounded to 2 decimals). The same value appears in the Celsius output: 37.0 °C.

Assumptions

  • The Fahrenheit scale is the US customary temperature scale; the conversion is exact by definition.
  • Absolute zero is −459.67 °F, which corresponds to 0 K.
  • The formula applies to any temperature, including negative values in °F (as long as they are above absolute zero).

Why Use Kelvin?

Kelvin is the SI base unit of thermodynamic temperature. Unlike Fahrenheit or Celsius, it is an absolute scale: 0 K is the point where molecular motion has its minimum possible energy. This makes kelvin essential in physics and chemistry because many equations (ideal gas law, Arrhenius equation, blackbody radiation) require temperature in kelvin to work correctly. For example, the ideal gas law PV = nRT uses R = 8.314 J/(mol·K); if you plug in Celsius, you get nonsense. Converting to kelvin first ensures your calculations are physically meaningful.

How to Convert Without a Calculator

If you need a quick mental estimate, remember these reference points:

  • 0 °F ≈ 255.4 K (cold winter day)
  • 32 °F = 273.15 K (freezing point of water)
  • 70 °F ≈ 294.3 K (room temperature)
  • 98.6 °F = 310.15 K (body temperature)
  • 212 °F = 373.15 K (boiling point of water)

For a rough estimate, you can use K ≈ (°F + 459.67) × 5/9, which is the same formula rearranged. In your head, you might approximate by adding 460, multiplying by 5, and dividing by 9. For example, 70 °F: (70 + 460) = 530; 530 × 5 = 2650; 2650 / 9 ≈ 294.4 K. That is very close to the exact 294.26 K.

Common Mistakes and Misconceptions

  • Forgetting the 273.15 offset: Some people convert °F to °C and stop, but kelvin requires the offset. Always add 273.15 after the Celsius step.
  • Using the wrong order of operations: The formula is (F − 32) × 5/9 + 273.15, not F − 32 × 5/9 + 273.15. Subtraction must happen first. In the calculator, parentheses are handled automatically.
  • Mixing up the factor: To go from kelvin to Fahrenheit, you invert: °F = (K − 273.15) × 9/5 + 32. Many people accidentally use 5/9 when converting back.
  • Rounding too early: If you round intermediate values, you can introduce errors. Keep at least a few decimal places until the final answer.
  • Writing “degrees kelvin”: The unit is simply “kelvin” (symbol K), not “degrees kelvin.” For example, 300 kelvin, not 300 degrees kelvin.

Practical Applications

You will need this conversion in many science and engineering contexts:

  • Gas law calculations: Ideal gas law problems almost always require temperature in kelvin.
  • Thermodynamics: Entropy, enthalpy, and Gibbs free energy calculations use kelvin.
  • Chemistry lab: Reaction rates and equilibrium constants often depend on kelvin temperatures.
  • Engineering: Heat transfer and material properties are specified in kelvin.
  • Meteorology: Some atmospheric science data is reported in kelvin, especially at high altitudes.

When working in a lab, always follow your lab method, the safety data sheet (SDS) and your supervisor. Temperature conversions are arithmetic, but the actual measurement must be done with a calibrated thermometer.

Frequently Asked Questions

What is the formula to convert Fahrenheit to kelvin?

The exact formula is K = (°F − 32) × 5/9 + 273.15. Subtract 32 from the Fahrenheit value, multiply by 5/9, then add 273.15.

How do you convert kelvin to Fahrenheit?

The reverse formula is °F = (K − 273.15) × 9/5 + 32. Subtract 273.15 from the kelvin value, multiply by 9/5, then add 32.

Why do we add 273.15 instead of 273?

The exact offset between Celsius and kelvin is 273.15 K. Using 273 gives an approximation that is off by 0.15 K, which can matter in precise scientific work. For most everyday purposes, 273 is close enough, but for exact calculations use 273.15.

What is absolute zero in Fahrenheit?

Absolute zero is 0 K, which equals −459.67 °F. This is the lowest possible temperature, where molecular motion is minimal.

Can I use the same formula for negative Fahrenheit values?

Yes, as long as the value is above −459.67 °F. For example, −40 °F converts to 233.15 K. The formula works for any temperature above absolute zero.

Is kelvin ever negative?

No. The kelvin scale is absolute, so it cannot be negative. The lowest possible value is 0 K. If a calculation gives a negative kelvin, you have made an error, usually by using a temperature below absolute zero.

Related

Formula used
in f | Temperature in °F | °F | 98.6 | -459.67
out k | Temperature in kelvin | K | (f - 32) * 5 / 9 + 273.15 | 2
out c | Temperature in °C | °C | (f - 32) * 5 / 9 | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →