molecalculator

Moles & Molar Mass

Fahrenheit to Newton Conversion: Formula & Calculator

Calculator No. 01-8787 · Updated · Formula and assumptions shown below

Temperature in Newton 12.2100 °N
Temperature in Fahrenheit
98.6 °F
Set in the form below
You enter
Temperature in Fahrenheit (°F)
You get
Temperature in Newton (°N)
Rounding
4 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

To convert a temperature from Fahrenheit to Newton, subtract 32, multiply by 11, then divide by 60. The Newton scale (°N) is an obsolete temperature scale where 0 °N is the freezing point of water and 33 °N is the boiling point, so each Newton degree equals 100/33 of a Celsius degree.

Formula

The conversion formula is:

°N = (°F − 32) × 11 / 60

Where:

  • °F = temperature in degrees Fahrenheit
  • °N = temperature in degrees Newton

This comes directly from the definition of the Newton scale. Isaac Newton proposed his scale around 1700, setting 0 °N as the freezing point of water and 33 °N as the boiling point. Since the Fahrenheit scale sets 32 °F as freezing and 212 °F as boiling, the two scales share the same endpoints but divide the interval differently: 180 Fahrenheit degrees span the same range as 33 Newton degrees. Therefore, one Newton degree equals 180/33 = 60/11 Fahrenheit degrees, and the formula above follows.

Worked Example

Convert normal human body temperature, 98.6 °F, to Newton.

  1. Subtract 32: 98.6 − 32 = 66.6
  2. Multiply by 11: 66.6 × 11 = 732.6
  3. Divide by 60: 732.6 ÷ 60 = 12.21

So 98.6 °F = 12.21 °N. The calculator above gives the same result.

Assumptions

  • The conversion uses the exact linear relationship between the two scales.
  • Both scales are defined with the same reference points (water freezing and boiling at standard pressure).
  • No rounding is applied before the final result.

Background: The Newton Temperature Scale

Isaac Newton developed his temperature scale in the early 1700s, before Fahrenheit and Celsius existed. He used linseed oil as the thermometric fluid and calibrated it against several fixed points, including melting snow (0 °N), boiling water (33 °N), and human body temperature (about 12 °N). His scale was one of the first attempts to standardize temperature measurement, but it never became widely adopted. Today it is mainly a historical curiosity, though it occasionally appears in older scientific texts or as a trivia question.

How to Convert Fahrenheit to Newton

The conversion is a simple two-step arithmetic process:

  • Subtract 32 from the Fahrenheit value (to shift the zero point).
  • Multiply the result by 11/60 (to adjust the scale size).

For example, to convert 212 °F (boiling water):

  • 212 − 32 = 180
  • 180 × 11/60 = 33 °N

To convert 32 °F (freezing water): 32 − 32 = 0, then 0 × 11/60 = 0 °N. The formula works for all temperatures, including negative values and absolute zero (−459.67 °F = −90.14 °N).

Common Mistakes and Misconceptions

A frequent error is forgetting to subtract 32 before multiplying. For example, converting 100 °F directly as 100 × 11/60 = 18.33 °N is wrong; the correct value is (100 − 32) × 11/60 = 12.47 °N. Another mistake is confusing the Newton scale with the Réaumur scale, which also has 0 at freezing but 80 at boiling. Réaumur uses a factor of 4/9 instead of 11/60. Also, do not confuse °N with the Newton unit of force (N) – the temperature scale uses the degree symbol.

Comparison with Other Temperature Scales

Fahrenheit, Celsius, Kelvin, and Newton are all linear scales, so conversions are straightforward. The key relationships are:

  • °C = (°F − 32) × 5/9
  • K = °C + 273.15
  • °N = (°F − 32) × 11/60
  • °N = °C × 33/100

For quick reference, common temperatures:

  • Absolute zero: −459.67 °F = −90.14 °N
  • Freezing water: 32 °F = 0 °N
  • Room temperature (20 °C): 68 °F = 6.6 °N
  • Body temperature: 98.6 °F = 12.21 °N
  • Boiling water: 212 °F = 33 °N

Notice that the Newton scale has a much smaller numeric range than Fahrenheit, because one Newton degree is about 5.45 times larger than one Fahrenheit degree.

Why Convert to Newton?

In modern practice, you rarely need to convert to Newton. The scale is not used in science, industry, or daily life. However, you might encounter it when:

  • Reading historical documents or old scientific papers that used Newton’s scale.
  • Solving puzzles or trivia questions about obscure temperature scales.
  • Studying the history of thermometry and how temperature measurement evolved.

If you need to convert for practical purposes, it is easier to convert Fahrenheit to Celsius first, then to Newton if needed. But the direct formula above is just as simple.

Frequently Asked Questions

What is the formula to convert Fahrenheit to Newton?

The formula is °N = (°F − 32) × 11/60. Subtract 32 from the Fahrenheit temperature, then multiply by 11 and divide by 60.

What is 100 °F in Newton?

100 °F equals (100 − 32) × 11/60 = 12.47 °N. This is slightly above normal body temperature in Newton degrees.

Is the Newton scale still used anywhere?

No, the Newton scale is obsolete. It is not used in any country or scientific field today. It is only of historical interest.

How do I convert Newton back to Fahrenheit?

Reverse the formula: °F = (°N × 60/11) + 32. For example, 33 °N = (33 × 60/11) + 32 = 180 + 32 = 212 °F.

What is the difference between Newton and Réaumur scales?

Both have 0 at the freezing point of water, but Newton sets boiling at 33 °N while Réaumur sets it at 80 °Ré. So one Newton degree is larger than one Réaumur degree.


Related

Formula used
in f | Temperature in Fahrenheit | °F | 98.6 | -459.67
out n | Temperature in Newton | °N | (f - 32) * 11 / 60 | 4

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →