To convert a temperature from Fahrenheit to Rankine, simply add 459.67 to the Fahrenheit value. The formula is °R = °F + 459.67, where °R is the temperature in degrees Rankine and °F is the temperature in degrees Fahrenheit. This page provides a calculator, the derivation, and practical examples.
Formula
The Rankine scale (°R) is an absolute temperature scale named after the Scottish engineer and physicist William John Macquorn Rankine (1820–1872). The conversion from Fahrenheit to Rankine is:
°R = °F + 459.67
where:
- °R = temperature in degrees Rankine (unit: °R, also written as °Ra)
- °F = temperature in degrees Fahrenheit (unit: °F)
- 459.67 = the offset that aligns the zero point of the Rankine scale with absolute zero (unit: °R)
This is a simple linear shift, not a scaling, because both scales have the same degree size: a change of 1°F equals a change of 1°R. The only difference is where zero is placed. On the Fahrenheit scale, the freezing point of water is 32°F and the boiling point is 212°F. On the Rankine scale, absolute zero is 0°R, and the freezing point of water is 491.67°R.
Worked Example
Using the calculator defaults, convert 68°F to Rankine.
- Start with the Fahrenheit value: 68°F.
- Apply the formula: °R = 68 + 459.67.
- Add: 68 + 459.67 = 527.67.
- Result: 68°F is equal to 527.67°R.
The calculator shows the same result (527.67°R) with two decimal places.
Assumptions
- The conversion uses the exact offset of 459.67, which is defined by the relationship between the Fahrenheit and Rankine scales.
- The Fahrenheit input can be any value down to absolute zero (−459.67°F), which corresponds to 0°R.
- No rounding is applied to the input; the output is rounded to two decimal places for readability.
Background: Why Rankine Exists
Rankine is the absolute temperature scale paired with Fahrenheit, just as Kelvin is the absolute scale paired with Celsius. It was proposed in 1859 by Macquorn Rankine, who wanted an absolute scale that used the same degree increments as Fahrenheit. This makes Rankine convenient in engineering fields that still use Fahrenheit for everyday measurements, especially in the United States. For example, in thermodynamics, gas law calculations (like PV = nRT) require an absolute temperature scale. If you are working in Fahrenheit-based units, you must convert to Rankine before plugging into the gas law. The Rankine scale is used in some branches of American mechanical and aerospace engineering, particularly in the analysis of heat engines and refrigeration cycles.
How the Conversion Works
The conversion is purely an offset because both scales have the same degree size. On the Fahrenheit scale, the interval between the freezing point (32°F) and boiling point (212°F) of water is 180 degrees. On the Rankine scale, that same interval is also 180 degrees (from 491.67°R to 671.67°R). Therefore, to convert, you only need to shift the zero point. Absolute zero is −459.67°F, which is set to 0°R. So adding 459.67 to any Fahrenheit temperature gives the corresponding Rankine value. For instance:
- 32°F (freezing point of water) → 32 + 459.67 = 491.67°R
- 212°F (boiling point of water) → 212 + 459.67 = 671.67°R
- −40°F (where Fahrenheit and Celsius meet) → −40 + 459.67 = 419.67°R
- 0°F → 459.67°R
How to Choose: When to Use Rankine vs. Kelvin
Use Rankine when your other data (such as pressure in psia, volume in cubic feet, or specific heat in Btu/lbm·°R) are in Imperial units. Use Kelvin when your data are in SI units (pascals, cubic meters, joules). The gas constant R has different values depending on the unit system: for example, R = 8.314 J/(mol·K) in SI, but R = 1.986 Btu/(lbmol·°R) in Imperial. Mixing Rankine with SI units or Kelvin with Imperial units will give incorrect results. In practice, if you are an American engineer working with Fahrenheit-based data, you likely need Rankine. If you are a scientist or working internationally, Kelvin is the standard. The choice is not about which is “better” but about consistency in your calculations.
Common Mistakes and Misconceptions
One common mistake is confusing Rankine with Réaumur (°Ré) or with the Rankine symbol. Always use °R (or °Ra) for Rankine. Another error is forgetting that Rankine is an absolute scale: you cannot use it in formulas that expect a relative temperature (like temperature differences) without adjusting. For example, a temperature difference of 10°F is also 10°R, but an absolute temperature of 50°F is 509.67°R, not 50°R. Also, some people mistakenly think that Rankine is just Celsius plus 459.67, but that is wrong; the offset is for Fahrenheit, not Celsius. To convert Celsius to Rankine, you first convert to Fahrenheit or use °R = (°C + 273.15) × 9/5. Finally, be careful with negative temperatures: absolute zero is −459.67°F, so any Fahrenheit value below that is physically impossible.
Practical Examples and Applications
Rankine is used in thermodynamics, especially in the analysis of steam power plants (Rankine cycle), jet engines, and refrigeration. Here are a few examples:
- Gas law calculation: If a gas has a temperature of 80°F, you convert to Rankine: 80 + 459.67 = 539.67°R. Then use the gas law with R in Imperial units.
- Thermal efficiency: The Carnot efficiency formula uses absolute temperatures. For a heat source at 1000°F (1459.67°R) and a sink at 100°F (559.67°R), the efficiency is 1 − (559.67/1459.67) = 0.616, or 61.6%.
- Heat transfer: In conduction calculations, temperature differences are the same in °F and °R, so you can use either, but absolute temperatures are needed for radiation calculations (Stefan-Boltzmann law uses absolute temperature).
Limitations of the Simple Formula
The formula °R = °F + 459.67 is exact and has no limitations other than the physical constraint that temperatures cannot go below absolute zero. However, when using Rankine in engineering calculations, be aware that the Rankine scale is based on the Fahrenheit degree, which is 5/9 the size of a Kelvin degree. This means that a temperature change of 1°R equals 5/9 K. Also, the Rankine scale is not widely used outside of certain engineering fields, so if you are sharing results with scientists, you may need to convert to Kelvin. The calculator above provides the conversion instantly, but for manual work, remember the offset 459.67.
Frequently Asked Questions
What is the formula to convert Fahrenheit to Rankine?
Add 459.67 to the Fahrenheit temperature. For example, 70°F becomes 70 + 459.67 = 529.67°R.
How do you convert Rankine back to Fahrenheit?
Subtract 459.67 from the Rankine value. So 529.67°R − 459.67 = 70°F.
Is Rankine the same as Kelvin?
No. Both are absolute scales, but Rankine uses the Fahrenheit degree size, while Kelvin uses the Celsius degree size. 0 K = 0°R, but 1 K = 1.8°R. The freezing point of water is 273.15 K = 491.67°R.
Why do we need Rankine if we have Kelvin?
Rankine is convenient when working with Imperial units. Many American engineering textbooks and software use °F and lbm, so using Rankine avoids conversion errors in gas law and thermodynamic calculations.
What is absolute zero in Fahrenheit and Rankine?
Absolute zero is −459.67°F, which equals 0°R.
Can I use Rankine in the ideal gas law with SI units?
No. The ideal gas law requires consistent units. If you use Rankine, you must use the corresponding value of R (e.g., 1.986 Btu/(lbmol·°R)) and Imperial units for pressure, volume, and amount.
Related
Formula used
in f | Temperature in Fahrenheit | °F | 68 | -459.67 out r | Temperature in Rankine | °R | f + 459.67 | 2
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- ug to ppb Calculator: Convert Micrograms per Liter1.00 ppb
- Grams to Moles Chemistry: How to Convert0.2000 mol/L
- Convert ug/l to ppb Calculator
- CPP Calculator Ontario: How CPP Is Calculated162.12 $/month
- Grams to Moles to Molecules: How to Convert0.2000 mol/L
- Organic Chemistry Reaction Calculator: How It Works