The formula mass of glucose (C6H12O6) is 180.156 g/mol when calculated using standard atomic weights (C = 12.011, H = 1.008, O = 15.999). This value represents the mass of one mole of glucose molecules, which is the sum of the atomic masses of its 6 carbon, 12 hydrogen, and 6 oxygen atoms.
Formula
Formula mass (also called molar mass or molecular weight) is the sum of the atomic masses of all atoms in a chemical formula. For glucose, C6H12O6:
Formula mass = (6 × atomic mass of C) + (12 × atomic mass of H) + (6 × atomic mass of O)
- Carbon: 6 × 12.011 = 72.066 g/mol
- Hydrogen: 12 × 1.008 = 12.096 g/mol
- Oxygen: 6 × 15.999 = 95.994 g/mol
- Total: 72.066 + 12.096 + 95.994 = 180.156 g/mol
Each variable is straightforward: the subscripts (6, 12, 6) come from the molecular formula, and the atomic weights are standard IUPAC values. The unit is grams per mole (g/mol), which means that 180.156 grams of glucose contains exactly 6.022 × 1023 molecules (Avogadro’s number).
Worked Example
You need to prepare 250 mL of a 0.200 M glucose solution for a cell culture experiment. How many grams of glucose do you weigh out?
Step 1: Convert volume to liters: 250 mL / 1000 = 0.250 L
Step 2: Use the molarity formula: moles = molarity × volume = 0.200 mol/L × 0.250 L = 0.0500 mol
Step 3: Convert moles to grams: mass = moles × molar mass = 0.0500 mol × 180.156 g/mol = 9.0078 g
So you weigh out 9.01 g of glucose, dissolve it in about 200 mL of water, then bring the total volume to exactly 250 mL in a volumetric flask. The calculator above uses the same logic: enter mass, molar mass, and volume to get molarity. For example, with 2.922 g of glucose (molar mass 180.156) in 250 mL, the molarity is 2.922 / 180.156 / (250/1000) = 0.0649 M, or 64.9 mM.
Assumptions
- Atomic weights are the IUPAC abridged standard values (H 1.008, C 12.011, O 15.999).
- The compound is pure anhydrous glucose (no water of hydration).
- For solution calculations, the final volume is used, not the volume of solvent added.
- Density changes and temperature effects on volume are ignored for dilute solutions.
Why the Formula Mass Matters
The formula mass is the bridge between the microscopic world of molecules and the macroscopic world of lab balances. Every time you prepare a solution, calculate a yield, or convert between moles and grams, you need this number. For glucose specifically, it appears in:
- Preparing culture media (e.g., DMEM contains 4.5 g/L glucose, which is 25 mM)
- Calculating blood glucose molarity from mg/dL readings (180.156 g/mol is the conversion factor)
- Stoichiometry in glycolysis and fermentation reactions
- Determining osmotic pressure and freezing point depression in solutions
For example, a blood glucose reading of 90 mg/dL converts to 90/180.156 = 0.4995 mmol/L, or 5.0 mM. Without the accurate molar mass, clinical and research calculations would be systematically off.
Common Mistakes and Misconceptions
One frequent error is using the atomic mass of carbon as 12.0 instead of 12.011. That small difference (0.011 × 6 = 0.066) changes the final value to 180.09, which is only 0.04% off, but for precise work it matters. Another mistake is confusing formula mass with the mass of a single molecule: one molecule of glucose weighs 180.156 / (6.022 × 1023) = 2.99 × 10-22 g, which is absurdly small.
A related misconception is that glucose and fructose have the same formula mass (they do, both C6H12O6) but different structures. Isomers share the same formula mass but have different physical and chemical properties. Also, note that the hydrated form of glucose (glucose monohydrate, C6H12O6·H2O) has a formula mass of 198.17 g/mol, which includes the water molecule. Many lab reagents are sold as monohydrate, so check the label before weighing.
How to Use This Calculator
The calculator above solves the most common lab problem: you know the mass of a solute and the desired volume, and you need the molarity. Enter the mass of glucose (or any solute) in grams, its molar mass in g/mol, and the final solution volume in mL. The calculator returns the molarity in mol/L and in millimolar (mM).
For glucose, the molar mass is 180.156 g/mol, so you can enter that directly. If you are using a different solute, look up its molar mass from the periodic table or a reliable source. The calculator works for any compound, not just glucose.
To prepare a solution of a specific molarity, rearrange the formula: mass (g) = molarity (mol/L) × volume (L) × molar mass (g/mol). For example, to make 500 mL of 0.5 M glucose: 0.5 × 0.5 × 180.156 = 45.04 g.
Limitations and Precision
The formula mass of 180.156 g/mol is based on the IUPAC abridged atomic weights, which are averages of naturally occurring isotopes. For most laboratory work, this is precise enough (5 significant figures). However, if you are working with isotopically labeled glucose (e.g., 13C-glucose), the molar mass will be higher depending on how many atoms are replaced. For example, uniformly labeled 13C6-glucose has a molar mass of 186.15 g/mol (adding 6 × 1.00335 for the carbon atoms).
Also, the molarity calculation assumes the solute dissolves completely and that the final volume is measured accurately. In practice, you should always use a volumetric flask and bring the solution to the mark after the solute has dissolved. Temperature affects solution volume slightly, but for most teaching and research purposes, this is negligible at room temperature.
Frequently Asked Questions
What is the difference between formula mass and molecular weight?
They are the same for covalent compounds like glucose. The term “formula mass” is more general and can apply to ionic compounds (e.g., NaCl) where there are no discrete molecules. For glucose, both terms refer to the sum of atomic masses in one molecule, expressed in g/mol or atomic mass units (u). One mole of glucose weighs 180.156 g, and one molecule weighs 180.156 u.
Why is glucose’s formula mass not a whole number?
Because atomic weights are weighted averages of isotopes. Carbon-12 is exactly 12 u, but natural carbon also contains about 1.1% carbon-13, raising the average to 12.011. Similarly, hydrogen and oxygen have isotopes. So the sum of these averages gives a non-integer value. If you used only the most common isotopes (12C, 1H, 16O), the mass would be exactly 180 u, but that’s not what you measure in a real sample.
How do I convert mg/dL glucose to mmol/L?
Divide the mg/dL value by 18.0156 (which is 180.156 / 10). For example, 90 mg/dL ÷ 18.0156 = 5.0 mmol/L. The factor 18 comes from the molar mass divided by 10 (since 1 dL = 0.1 L). Clinically, this conversion is standard for blood glucose readings.
Does glucose have the same formula mass as other sugars?
Yes, glucose, fructose, and galactose all have the molecular formula C6H12O6, so they share the same formula mass of 180.156 g/mol. They are structural isomers. Disaccharides like sucrose (C12H22O11) have a different formula mass: 342.30 g/mol.
What is the mass of one glucose molecule in grams?
Divide the molar mass by Avogadro’s number: 180.156 g/mol ÷ 6.022 × 1023 mol-1 = 2.99 × 10-22 g. This is an incredibly small mass, which is why we use moles for practical measurements. In atomic mass units, one glucose molecule weighs 180.156 u.
Why is the calculator default molar mass 58.44 instead of 180.156?
The default value is for sodium chloride (NaCl), which is the most common solute used to teach molarity. To calculate glucose solutions, simply change the molar mass input to 180.156. The calculator is generic and works for any solute; the default is just a convenient starting point.
Related
Formula used
in m | Mass of solute | g | 2.922 | 0 in mm | Molar mass | g/mol | 58.44 | 0.001 in v | Final solution volume | mL | 250 | 0.001 out c | Molarity | mol/L | m / mm / (v / 1000) | 4 out cmm | Concentration in millimolar | mM | c * 1000 | 2
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- QPP Calculator Canada: How It Works & How to Use It
- PPP Calculator World Bank: How It Works & How to Use It2,000.00
- PPP Calculator: India vs USA Cost Comparison1,000.00 USD
- PPP Calculator USD to INR: How It Works2,335 INR
- PPP Calculator India vs UK: Real Cost Comparison103.63 GBP
- PPP Calculator India vs Dubai: Real Cost Comparison8,954.58 AED