Free expansion of an ideal gas is its spontaneous expansion into an evacuated region, with no opposing pressure doing work. For an ideal gas in an insulated, rigid container, its temperature and internal energy do not change, even though its volume and entropy increase.
Formula
This calculator describes a reversible-state comparison between the initial and final equilibrium states of an ideal gas undergoing free expansion in an insulated, rigid container. The gas expands into a vacuum, so the external pressure is zero. The formulas are:
- Work done by the gas: W = 0 J.
- Heat transferred to the gas: Q = 0 J, for an insulated container.
- Temperature change: ΔT = 0 K.
- Entropy change: ΔS = nR ln(Vf/Vi).
Here, n is the amount of gas in moles; R = 8.31446261815324 J/(mol·K), the SI molar gas constant; Vi is the initial volume and Vf the final volume, both entered in liters; and ln is the natural logarithm. The volume ratio is dimensionless, so both volumes must use the same unit. The work and heat signs use the convention that W is work done by the gas and Q is heat entering the gas.
Worked Example
Using the calculator defaults, 1.0000 mol of ideal gas expands from 1.0000 L to 2.0000 L at an initial temperature of 300.00 K in an insulated, rigid container:
- Work: W = 0 J, because the gas pushes against zero external pressure.
- Heat: Q = 0 J, because the container is insulated.
- Temperature change: ΔT = 0 K.
- Entropy change: ΔS = (1.0000 mol)(8.31446261815324 J/(mol·K)) ln(2.0000 L / 1.0000 L) ≈ 5.7631 J/K.
The ideal-gas internal energy change is ΔU = Q − W = 0 J. The calculated entropy change is positive because the gas has more volume available to occupy.
Assumptions
- The gas is ideal and reaches well-defined equilibrium states before and after expansion.
- The container is rigid and insulated; no heat crosses its boundary.
- Expansion is into a vacuum, with zero external pressure and no work against a load.
- The gas amount is fixed, and the entered volumes are positive and use the same unit.
What Free Expansion Means
Imagine a rigid vessel divided into two compartments by a partition. One side contains gas, and the other side is evacuated. When the partition is removed, the gas spreads into the empty side. This is called free expansion, or Joule expansion. “Free” does not mean that the gas gains energy; it means there is no opposing pressure doing mechanical work on the boundary during the expansion.
The idealized process is irreversible. The gas does not pass through a continuous sequence of equilibrium states while spreading; pressure and density can vary across the vessel during the motion. The initial and final states can be described by equilibrium variables, but a single uniform pressure or temperature need not describe every instant in between.
Why Temperature Stays the Same
The first law of thermodynamics connects internal-energy change, heat, and work. With the convention used here, ΔU = Q − W, where W is work done by the gas. For an insulated free expansion, Q = 0. Since external pressure is zero, the gas does no expansion work, so W = 0. Therefore ΔU = 0.
For an ideal gas, internal energy depends only on temperature. Thus, no change in internal energy means no change in temperature: ΔT = 0. This conclusion does not depend on whether the gas is monatomic or polyatomic, provided it behaves ideally and its internal energy is a function of temperature alone.
The result is often misunderstood as “expanding gases never cool.” They can cool when they expand under different conditions. For instance, a gas doing work against a load or flowing through a throttling valve is not undergoing the insulated free expansion described here. Real gases can also change temperature in free expansion because their internal energy can depend on volume as well as temperature.
Entropy Increases Despite Zero Heat Flow
Zero heat transfer does not imply zero entropy change. Entropy is a state function, so its change can be calculated using any convenient reversible path between the same initial and final equilibrium states—even though the actual free expansion is irreversible.
For an ideal gas, an isothermal reversible expansion gives ΔS = nR ln(Vf/Vi). This is why the calculator uses the same formula for the initial and final states of the free expansion. If the final volume is twice the initial volume, entropy increases by nR ln 2, about 5.763 J/K per mole. The surroundings receive no heat in the insulated idealization; the entropy increase belongs to the gas.
Because Vf is greater than Vi, the logarithm and entropy change are positive. If the volumes are equal, the formula gives zero change, corresponding to no expansion. A final volume smaller than the initial volume does not describe expansion into an initially evacuated region, so this calculator’s free-expansion model is not appropriate for that case.
When This Model Is Useful—and Its Limits
Free expansion is a clear example for learning the first and second laws: it shows that a system can gain entropy without taking in heat, and it distinguishes work from changes in volume. It is also useful for comparing idealized thermodynamic paths that end in the same state.
The calculation is not a detailed prediction of the changing pressure, density, or temperature at every point during the expansion. Nor does it model a real vessel’s heat leakage, partition motion, turbulence, or gas nonideality. At high pressures or near condensation, real-gas effects can matter. In that situation, an appropriate equation of state and substance-specific thermodynamic data are needed; the ideal-gas prediction of unchanged temperature may fail.
For a finite external pressure, work is generally not zero: under a simple constant-pressure boundary model, work done by the gas is W = Pext(Vf − Vi). Heat transfer and temperature change then depend on the actual process and boundary conditions. Do not apply the zero-work result merely because a gas’s volume increases; the key condition is expansion against a vacuum.
Frequently Asked Questions
Does an ideal gas cool during free expansion?
No, not in the idealized case. An insulated gas expanding into a vacuum does no work, receives no heat, and has no change in internal energy; an ideal gas therefore has no temperature change.
Why does entropy increase if no heat enters?
Entropy change is not simply heat divided by temperature for every process. That relation applies directly to reversible heat transfer. Here, entropy is evaluated from the initial and final states using a hypothetical reversible path, giving a positive increase as the gas occupies more volume.
Is free expansion reversible?
No. The gas spreads spontaneously into the vacuum, and restoring the initial state requires changes to the gas and its surroundings. The reverse process does not occur spontaneously under the same conditions.
What if the gas is not ideal?
A real gas can change temperature during free expansion because its internal energy may depend on volume. The temperature change then depends on the gas’s properties and the initial state, so the ideal-gas result cannot be assumed.
Does a gas do work when it expands into a vacuum?
No boundary work is done against the vacuum because its pressure is zero. This does not mean the gas does no internal motion or that the process is reversible; it means the external mechanical work for this idealized expansion is zero.
Related
Formula used
in n | Amount of gas | mol | 1 | 0 in t | Initial temperature | K | 300 | 0 in vi | Initial volume | L | 1 | 0 in vf | Final volume | L | 2 | 0 out w | Work done by gas | J | 0 | 2 out q | Heat transferred to gas | J | 0 | 2 out dt | Temperature change | K | 0 | 2 out ds | Entropy change | J/K | n * 8.31446261815324 * ln(vf / vi) | 3
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Isotope Percent Abundance Calculator and How to Use It75.91 %
- Percentage Abundance Calculator and How to Find It
- Isotope Fractional Abundance Calculator and Formula0.2409 fraction
- Percent Abundance Formula: Calculate Isotope Percentages25.00 %
- Isotope Percent Abundance Calculator and How to Use It50.00 %
- Isotope Percent Abundance Calculator and How-To Guide75.91 %