Glucose has a molar mass of 180.156 g/mol. This is the mass of one mole of glucose molecules (C6H12O6), calculated by summing the atomic weights of its constituent atoms. You can use this value to convert between the mass of glucose and the number of moles, which is essential for preparing solutions and understanding chemical reactions.
Formula
The molar mass (M) of a compound is the sum of the atomic masses of each element multiplied by its subscript in the chemical formula. For glucose, C6H12O6:
M(C6H12O6) = (6 × M(C)) + (12 × M(H)) + (6 × M(O))
Using the standard atomic weights: M(C) = 12.011 g/mol, M(H) = 1.008 g/mol, M(O) = 15.999 g/mol.
M = (6 × 12.011) + (12 × 1.008) + (6 × 15.999) = 72.066 + 12.096 + 95.994 = 180.156 g/mol.
In the calculator above, the molarity (c) is computed as c = m / (mm × (v / 1000)), where m is the mass of glucose in grams, mm is the molar mass in g/mol, and v is the final solution volume in milliliters (converted to liters by dividing by 1000).
Worked Example
Suppose you dissolve 18.0156 g of glucose (the default mass) in water to make 500 mL of solution. What is the molarity?
- Convert volume to liters: 500 mL × (1 L / 1000 mL) = 0.500 L.
- Calculate moles of glucose: 18.0156 g / 180.156 g/mol = 0.1000 mol (rounded to 4 significant figures).
- Calculate molarity: 0.1000 mol / 0.500 L = 0.2000 mol/L.
The calculator returns 0.2000 mol/L for the default inputs, confirming the calculation.
Assumptions
- The glucose is pure and anhydrous (no water of crystallization).
- The solution volume is the final volume after adding glucose and solvent, not the volume of solvent used.
- The molar mass is based on the IUPAC standard atomic weights; actual samples may have slight isotopic variations.
Why the Molar Mass Matters in the Lab
Knowing the molar mass of glucose lets you prepare solutions of exact concentration, which is a routine task in biochemistry, microbiology, and clinical labs. For example, a 1 M glucose solution is made by dissolving 180.156 g of glucose in enough water to make 1 liter of solution. If you need a 0.5 M solution, you would use half that mass (90.078 g) in 1 L final volume.
The molar mass also appears in osmotic pressure calculations (using the van ‘t Hoff equation), in enzyme kinetics (to express substrate concentration in mol/L), and in stoichiometric calculations for fermentation or glycolysis reactions. For instance, in the reaction C6H12O6 → 2 C2H5OH + 2 CO2, one mole of glucose (180.156 g) yields two moles of ethanol (92.14 g) and two moles of carbon dioxide (88.02 g).
How to Use the Calculator
Enter the mass of glucose you have, the molar mass (you can adjust if you are using a different sugar, but for glucose keep 180.156), and the final volume of solution. The calculator will give you the molarity (mol/L) and the amount in millimoles. To use it for a different compound, simply replace the molar mass with the correct value for that substance.
For example, if you have 5 g of glucose and want to make 250 mL of solution, enter m = 5, v = 250, mm = 180.156. The molarity will be 5 / 180.156 / (250/1000) = 0.1110 mol/L (rounded to 4 decimals).
Common Mistakes and Misconceptions
- Confusing molar mass with molecular weight: They are the same numerically, but molar mass has units of g/mol, while molecular weight is dimensionless. In practice, people use them interchangeably.
- Using the wrong atomic weights: Some textbooks use rounded values (e.g., C = 12, H = 1, O = 16), giving 180 g/mol. That is a good approximation, but the IUPAC standard gives 180.156 g/mol, which is more precise.
- Forgetting to convert volume to liters: Molarity is moles per liter. If you enter volume in mL without dividing by 1000, you will get a molarity that is 1000 times too high.
- Assuming glucose is a dimer or has a different formula: Glucose exists as a monomer in solution, and its molecular formula is C6H12O6. Some polysaccharides like starch have repeating glucose units, but the molar mass of glucose itself is fixed.
Glucose vs. Other Sugars
Glucose is a monosaccharide with the formula C6H12O6. Other common sugars have different molar masses:
- Fructose: also C6H12O6, molar mass 180.156 g/mol (isomer of glucose).
- Sucrose (table sugar): C12H22O11, molar mass 342.296 g/mol.
- Lactose: C12H22O11, also 342.296 g/mol (isomer of sucrose).
- Maltose: C12H22O11, also 342.296 g/mol.
When preparing sugar solutions, always check the chemical formula and use the correct molar mass for the specific sugar you are using.
Safety and Handling
Glucose is generally safe to handle, but standard lab practices apply: wear gloves and safety glasses to avoid dust inhalation or contact with eyes. It is not classified as hazardous, but large amounts can create slippery surfaces when spilled. When preparing solutions, always add glucose to water gradually and stir to dissolve; the dissolution is endothermic, so the solution may cool slightly. Dispose of glucose solutions according to your institution’s waste guidelines; they are usually biodegradable and can go down the drain with excess water, but check local regulations.
Frequently Asked Questions
What is the molar mass of glucose in g/mol?
The molar mass of glucose (C6H12O6) is 180.156 g/mol. This is the sum of 6 carbon atoms (12.011 each), 12 hydrogen atoms (1.008 each), and 6 oxygen atoms (15.999 each).
Is glucose molar mass the same as dextrose?
Yes. Dextrose is the common name for D-glucose, the same molecule. So the molar mass is identical: 180.156 g/mol.
How do I calculate the number of moles from grams of glucose?
Divide the mass in grams by the molar mass (180.156 g/mol). For example, 50 g of glucose is 50 / 180.156 = 0.2775 mol.
Why is the molar mass sometimes given as 180.16 g/mol?
That is a rounded value. The precise value from IUPAC atomic weights is 180.156 g/mol. For most calculations, 180.16 g/mol is sufficient; for high-precision work, use 180.156.
Does glucose have a different molar mass in solution?
No. The molar mass is an intrinsic property of the molecule. In solution, glucose may form hydrogen bonds with water, but its molecular mass does not change. However, the effective concentration in terms of particles (osmolarity) can be affected by dissociation, but glucose does not dissociate in water.
How many grams of glucose are in a 1 M solution?
To make 1 liter of 1 M glucose solution, you need 180.156 g of glucose. For a different volume, scale proportionally: for 250 mL, use 45.039 g.